The Time Domain Boundary Element Method (TDBEM) has its advantages in the analysis of transient electromagnetic fields (wake fields) induced by a charged particle beam with curved trajectory in a particle accelerator. On the other hand, the TDBEM has disadvantages of huge required memory and computation time compared with those of the Finite Difference Time Domain (FDTD) method or the Finite Integration Technique (FIT). This paper presents a comparison of the FDTD method and 4-D domain decomposition method of the TDBEM based on an initial value problem formulation for the curved trajectory electron beam, and application to a full model simulation of the bunch compressor section of the high-energy particle accelerators.

This paper proposes a novel metamaterial structure, which equivalently indicates negative permittivity, for the purpose of applying it to a near-field imaging and/or diagnostics of electromagnetic properties by using a surface plasmon in microwave frequency range. The proposed structure consists of a conducting wire lattice with conducting spheres embedded at the mid-point of the wire. It is shown that a spatial dispersion of the wire lattice can be reduced significantly by the sphere. It is also shown that this structure can successfully be applied to an excitation of the surface plasmon in the microwave frequency range by adequately cutting into a thin slab.

With the rapid progress of electronic and information technology, an expectation for the realization of body area network (BAN) by means of ultra wide band (UWB) techniques has risen. Although the signal from a single UWB device is very low, the energy absorption may increase significantly when many UWB devices are simultaneously adorned to a human body. An analysis method is therefore required from the point of view of biological safety evaluation. In this study, two approaches, one is in the time domain and the other is in the frequency domain, are proposed for the specific energy absorption (SA) and the specific absorption rate (SAR) calculation. It is shown that the two approaches have the same accuracy but the time-domain approach is more straightforward in the numerical analysis. By using the time-domain approach, SA and SAR calculation results are given for multiple UWB pulse exposure to an anatomical human body model under the Federal Communications Commission (FCC) UWB limit.

Electromagnetic field probes inevitably disturb the original distribution of the field when they are positioned close to a device. This disturbance in turn affects measurement accuracy and device operation. We developed an optical magnetic field probe, comprising a loop antenna element and an electro-optic crystal, for highly accurate magnetic near-field measurement in the GHz frequency range. We analyzed the invasiveness of the optical magnetic field probe quantitatively both experimentally and using finite difference time domain simulation. We found that eliminating the metal cable reduced the disturbance of the surrounding field that was to be measured. In addition, we investigated the magnetic field detection characteristics of the probe and its influence on the operation of a microstrip line. The optical magnetic field probe was less invasive and provided more accurate measurement.

We developed a compact, 16-channel integrated optical subscriber module for one-fiber bi-directional optical access systems. They can support more subscribers in a limited mounting space. For ultimate compactness, we created 8-channel integrated super-compact optical modules, 4-channel integrated limiting amplifiers, and 4-channel integrated LD drivers for Fast Ethernet. We introduce a new simulation method to analyze the electrical crosstalk that degrades sensitivity of the optical module. A new IC architecture is applied to reduce electrical crosstalk. We manufactured the optical subscriber module with these optical modules and ICs. Experiments confirm that the module offers a sensitivity of -27.3 dBm under 16-channel 125 Mbit/s simultaneous operation.

Scaled models for an anatomical head model and a simple head model are used to investigate the effects of head size on SAR characteristics for a cellular phone exposure at 835 MHz. From the results, we can see that a larger head produces a higher localized SAR and a lower whole-head averaged SAR.

The FDTD method needs Fourier analysis to obtain the fields of a single frequency. Furthermore, the frequency spectra of the fields used in the FDTD method ordinarily have wide bands, and all the fields in FDTD are treated as real numbers. Therefore, if the permittivity ε and the permeability µ of the medium depend on frequency, or if the surface impedance used for the surface impedance boundary condition (SIBC) depends on the frequency, the FDTD method becomes very complicated because of convolution integral. In the electromagnetic theory, we usually assume that the fields oscillate sinusoidally, and that the fields and ε and µ are complex numbers. The benefit of introduction of the complex numbers is very extensive. As we do in the usual electromagnetic theory, the authors assume that the fields in FDTD oscillate sinusoidally. In the proposed FDTD, the fields, ε, µ and the surface impedances for SIBC are all treated as the complex numbers. The proposed FDTD method can remove the above-mentioned weak points of the conventional FDTD method.