In this paper the time-domain analysis of two parallel traces is investigated. First, the telegrapher's equations for transmission line are applied to the parallel traces on printed circuit board (PCB), and are solved by using the mode decomposition technique. The time-domain solutions are then obtained by using the inverse Laplace transform. Although the Fourier-transform technique is also applicable for this problem, the solution is given numerically. Contrarily, the inverse Laplace transform successfully leads to an analytical expression for the transmission characteristics. The analytical expression is represented by series, which clearly explains the coupling mechanism. The analytical expression for the fundamental section of a meander delay line is investigated in detail. The analytical solution is validated by measurements, and the characteristics of the distortions in the output waveforms of meander delay lines due to the crosstalk are also investigated.

An analytical method for estimating coupling between microstrip lines in arbitrary directions on adjacent layers in multi-layer printed circuit boards is studied: one line is embedded and the other is on the surface layer. Coupling or crosstalk has been estimated by development of a circuit-concept approach based on modified telegrapher's equations of the Agrawal approach instead of the Taylor approach for some computational advantages. Electromagnetic fields from the embedded microstrip line and the microstrip line on the surface can be obtained by using the electric image method for dielectric substrates. To verify the proposed approach, we conducted some experiments and compared the results of our approach with those of measurement and a commercial electromagnetic solver.

The crosstalks between a single-ended line and a differential pair in parallel are analyzed using telegrapher's equations for multi-conductor lines. The crosstalk from the single-ended trace to the differential pair is estimated at shunt-arm resistors in T or Π termination networks. The analysis is conducted by incorporating the termination conditions with the solution of the telegrapher's equations. The time-domain characteristics of the crosstalk are obtained by using the fast inverse Laplace transform. The measurements are conducted easily by using a single-ended digital oscilloscope since the crosstalk is evaluated on the shunt-arm resistors. Both the calculated and measured results are presented, and the characteristics of the crosstalk are also investigated qualitatively.

We propose a method of crosstalk analysis for two bent transmission lines with vias at both ends on a PCB using a circuit-concept approach in the quasi-static condition. In this condition, the electromagnetic fields can be approximately estimated by the quasi-static terms of the accurate Green's function in an inhomogeneous medium. Thus we obtain a circuit model in an ABCD matrix by taking account of the fields generated by a longitudinal line and a vertical via on a PCB. To verify the proposed approach, we conducted some experiments and compared our approach's results with measured results and a commercial electromagnetic solver's results.

A new radio-frequency (RF) radiated immunity/susceptibility test method using four-septum TEM cell is proposed. A rotating-EM field can be generated inside the cell by feeding four-different RF DSB-SC signals to four septa arranged in the cell. Since a polarization plane of the rotating-EM field rotates in a low speed, the immunity/susceptibility test for the EM field with various polarizations can be conducted more easily. In this paper, a technique for generating the rotating-EM field in the cell is investigated. The basic characteristics of the cell and the rotating-EM field by using the technique are clarified. To verify the validity of this test method, a RF radiated susceptibility of a printed circuit board is measured. The measured results are verified by comparing with the theoretical results based on modified telegrapher's equations.

The crosstalk phenomenon, wich occurs between transmission lines, is caused by electromagnetic fields of currents flowing through the lines. Crosstalk between two bent lines is studied by using a set of solutions of modified telegrapher's equations. By expressing electromagnetic fields in terms of voltages and currents in the line ends, the resultant network function in the form of an ABCD matrix is obtained. Electromagnetic fields caused by currents flowing in risers at transmission line ends are taken into account in addition to those fields in line sections. The validity of the proposed approach was confirmed by comparing experimental results with computed results and those simulated by a commercial electromagnetic solver for some bent-line models.