This paper describes a SIFT (Scale Invariant Feature Transform) descriptor generation engine which features a VLSI oriented SIFT algorithm, three-stage pipelined architecture and novel systolic array architectures for Gaussian filtering and key-point extraction. The ROI-based scheme has been employed for the VLSI oriented algorithm. The novel systolic array architecture drastically reduces the number of operation cycle and memory access. The cycle counts of Gaussian filtering module is reduced by 82%, compared with the SIMD architecture. The number of memory accesses of the Gaussian filtering module and the key-point extraction module are reduced by 99.8% and 66% respectively, compared with the results obtained assuming the SIMD architecture. The proposed schemes provide processing capability for HDTV resolution video (1920 1080 pixels) at 30 frames per second (fps). The test chip has been fabricated in 65 nm CMOS technology and occupies 4.2 4.2 mm2 containing 1.1 M gates and 1.38 Mbit on-chip memory. The measured data demonstrates 38.2 mW power consumption at 78 MHz and 1.2 V.

This paper describes a low-power VLSI chip for speaker-independent 60-kWord continuous speech recognition based on a context-dependent Hidden Markov Model (HMM). It features a compression-decoding scheme to reduce the external memory bandwidth for Gaussian Mixture Model (GMM) computation and multi-path Viterbi transition units. We optimize the internal SRAM size using the max-approximation GMM calculation and adjusting the number of look-ahead frames. The test chip, fabricated in 40 nm CMOS technology, occupies 1.77 mm2.18 mm containing 2.52 M transistors for logic and 4.29 Mbit on-chip memory. The measured results show that our implementation achieves 34.2% required frequency reduction (83.3 MHz), 48.5% power consumption reduction (74.14 mW) for 60 k-Word real-time continuous speech recognition compared to the previous work while 30% of the area is saved with recognition accuracy of 90.9%. This chip can maximally process 2.4faster than real-time at 200 MHz and 1.1 V with power consumption of 168 mW. By increasing the beam width, better recognition accuracy (91.45%) can be achieved. In that case, the power consumption for real-time processing is increased to 97.4 mW and the max-performance is decreased to 2.08because of the increased computation workload.