An 8.8-GS/s 6-bit CMOS analog-to-digital converter (ADC) chip was implemented by time-interleaving eight 1.1-GS/s 6-bit flash ADCs with a 0.18-µm CMOS process. Eight uniformly-spaced 1.1 GHz clocks with 50% duty cycle for the eight flash ADCs were generated by a clock generator, which consists of a phase-locked-loop, digital phase adjusters and digital duty cycle correctors. The input bandwidth of ADC with the ENOB larger than 5.0 bits was measured to be 1.2 GHz. The chip area and power consumption were 2.24 mm2 and 1.6 W, respectively.

In this paper, we proposed that an area- and speed-effective fixed-point pipelined divider be used for reducing the bit-width of a division unit to fit a mobile rendering processor. To decide the bit-width of a division unit, error analysis has been carried out in various ways. As a result, when the original bit-width was 31-bit, the proposed method reduced the bit-width to 24-bit and reduced the area by 42% with a maximum error of 0.00001%.

A digital 3 Gbps 0.2 V differential transmitter is proposed using a voltage-mode pseudo-LVDS output driver. The delay mismatch between two pre-drivers is digitally calibrated by a modified digital DLL with the duty cycle correction. The height and width of eye opening are improved by 103% and 46%, respectively. The power consumption is 11.4 mW at 1.2 V with 0.18 µm process.