The trend of microwave circuits has been toward highly integrated systems. Most design tools for designing microwave circuits mounted the linear or the nonlinear devices adopt the fundamental circuit theory using the S matrix on the frequency domain. The harmonic balance method is also used to correspond to the nonlinear circuit. Therefore, the effect of the electromagnetic field, for example, a mutual coupling between sub-circuits through the space is almost disregarded. To calculate these circuits included its surrounding electromagnetic field, the finite difference time domain method combined with the equivalent circuit simulation had been presented as the lumped element FDTD (LE-FDTD) method. In general, even if an analytical target is a linear circuit, the FDTD method requires very long analytical time. In this paper, we propose an efficient LE-FDTD method to reduce the analytical time. We investigate its efficiency to compare with the conventional LE-FDTD method or measurements, consequently, it is confirmed that the proposal method requires only at analytical time of 1/10 compared with the conventional method. We also show that the proposal method is able to analyze characteristics of the active integrated antenna (AIA) which are practicably impossible to analyze by using the conventional method.

Beam control using active antenna arrays with self-oscillating harmonic mixers has been investigated. The active antenna is composed of a patch antenna receiving RF signal and a parallel feedback type oscillator which operates as the self-oscillating harmonic mixer, and down-converts the received RF signal into IF signal. The mixer has two ports for local oscillating (LO) signal. One is an output port extracting the LO signal. The other is an input port for an injection signal to synchronize the local oscillation. The mixers can be coupled unilaterally without other nonreciprocal components by connecting the output port to the input port in the next mixer. In the unilaterally coupled array, the phase differences of the LO signals between the adjacent mixers can be varied without phase shifters in injection locking state by changing the local free-running frequencies of the self-oscillating mixers. The receiving pattern can be controlled by combining the IF signals from the individual active antennas, which have phases associated with the LO signals. The IF is difference between the RF and double of the LO frequency so that arbitrary phase differences from 0 to 2π radian can be provided to the output IF signals. The experiments using the two- and three-element arrays demonstrated beam control capability.

A rectifying antenna is one of the most important components for wireless power transmission applications. In our previous papers, some RF-DC conversion circuits with high conversion efficiency at low input power are proposed. However, these RF-DC conversion circuits have some parts of which size depends on operating frequency, so the circuit size becomes large at low operating frequency. And, the composition of these RF-DC conversion circuits is complicated. Therefore, in this paper, a new RF-DC conversion circuit composed of only chip devices is proposed. This circuit has higher conversion efficiency than the previously proposed circuits. And, size reduction of the RF-DC conversion circuit is realized. Moreover, the composition of the circuit is simple, so the circuit size does not depend on operating frequency. For design of the RF-DC conversion circuits, LE-FDTD method is used. The measurement results agree with analytical results of the LE-FDTD method very well, and availability of the LE-FDTD method is discovered. It is shown that LE-FDTD method is a powerful analytical way which can give efficient design of RF-DC conversion circuit with high conversion efficiency.

Active integrated antenna techniques have high potential for giving smaller size, lighter weight, lower cost and higher efficiency, in particular to millimeter-wave circuit-antenna systems. This paper gives a review of active integrated antenna techniques with emphasis on beam steering and retrodirective antenna arrays. Various beam steering operations of integrated antenna oscillator arrays using locking phenomena are presented. Beam steering arrays of such type have the feature that phase shifters are not necessary in the arrays. Arrays with higher harmonic output radiation can enlarge the beam steering range. Arrays of locked active antennas which operate as self-oscillating mixers can be beam controllable receiving antennas.