This letter proposes a new adaptive power management mechanism (APM2) which takes into account the remaining energy in an IEEE 802.16e system. Benefits of the mechanism are the reduction of frame response delay in a state with sufficient remaining energy, and an increase in the life of a station in a state of insufficient remaining energy. An analytical model for sleep mode operation is developed, and the proposed mechanism is validated by computer simulation.

This letter proposes a new multicast traffic control policy in TDM-PON, which differentially classifies multicast flows which have relatively many associated receivers as high-class, and multicast flows which have relatively few associated receivers as low-class. Simulation results confirm that the proposed policy can effectively enhance multicast performance regarding delay and loss, specifically important to multimedia services, compared to the legacy policy.

Although wavelength division multiplexing-passive optical network (WDM-PON) is known as a high-speed transfer, it creates high channel costs per subscriber and low bandwidth utilization due to the fact that a wavelength is dedicated to each subscriber. Thus, it is imperative to reduce channel costs per subscriber and improve the bandwidth utilization. To achieve these, we first adopt a existing WDM-PON, which uses the bidirectional transmission with a single source for cost-efficiency by employing a gain-saturated reflective semiconductor optical amplifier (RSOA). Secondly, based on the existing WDM-PON, we propose an enhanced hybrid WDM/TDM-PON, which can extend the number of subscribers supported in each wavelength with splitters in the physical layer and a shared-time division duplex (TDD) frame format in the media access control (MAC) layer. Moreover, it can adaptively control the bandwidth through a dynamic bandwidth allocation (DBA) scheme according to the volume of traffic. Compared to the non TDD-based hybrid WDM/TDM-PON, it can reduce channel costs per subscriber from the extended number of subscribers supported in each wavelength. Furthermore, due to the DBA, it can improve the total queueing delay and throughput, and thus increase the bandwidth utilization.

In Wireless Sensor Networks (WSNs), sensor nodes consume their limited battery energy to send and receive data packets for data transmission. If some sensor nodes transmit data packets more frequently due to imbalance in the network topology or traffic flows, they experience higher energy consumption. And if the sensor nodes are not recharged, they will be turned off from the lack of battery energy which will degrade network sustainability. In order to resolve this problem, this paper proposes an Energy-aware MAC Protocol (EMP), which adaptively decides on the size of the channel polling cycle consisting of the sleep state (not to communicate with its target node) and the listening state (to awaken to receive data packets), according to the network traffic condition. Moreover, in accordance with the remaining energy state of the sensor node, the minimum size of the channel polling cycle is increased for better energy saving. For performance evaluation and comparison, we develop a Markov chain-based analytical model and an event-driven simulator. Simulation results show that a sensor node with EMP effectively reduces its energy consumption in imbalanced network condition and traffic flows, while latency somewhat increases under insufficient remaining energy. As a consequence, a holistic perspective for enhanced network sustainability can be studied in consideration of network traffic condition as well as the remaining energy states of sensor nodes.