We developed a quantitative evaluation method for luminance and color uniformity on a display screen. In this paper, we report the analysis result of a viewer perception of luminance and color uniformity. In experiments, observers subjectively evaluated Mura images which were showed on the light emitting diode (LED) backlight screen by adjusting the luminance of each LED. We measured the luminance and color distributions of the Mura images by a 2D colorimeter, then, the measured data was converted into S-CIELAB. In S-CIELAB calculations, two dimensional MTF (Modulation Transfer Function) of human eye were used in which anisotropic properties of the spatial frequency response of human vision were considered. Some indexes for a quantitative evaluation model were extracted by the image processing. The significant indexes were determined by the multiple regression analysis to quantify the degree of uniformity of the backlight screen. The luminance uniformity evaluation model and color uniformity evaluation model were derived from this analysis independently. In addition, by integrating both of these models we derived a quantitative evaluation model for luminance and color unevenness simultaneously existing on the screen.

Authors have been working in particle accelerator wake field analysis by using the Time Domain Boundary Element Method (TDBEM). A stable TDBEM scheme was presented and good agreements with conventional wake field analysis of the FDTD method were obtained. On the other hand, the TDBEM scheme still contains difficulty of initial value setting on interior region problems for infinitely long accelerator beam pipe. To avoid this initial value setting, we adopted a numerical model of beam pipes with finite length and wall thickness on open scattering problems. But the use of such finite beam pipe models causes another problem of unwanted scattering fields at the beam pipe edge, and leads to the involvement of interior resonant solutions. This paper presents a modified TDBEM scheme, Scattered-field Time Domain Boundary Element Method (S-TDBEM) to treat the infinitely long beam pipe on interior region problems. It is shown that the S-TDBEM is able to avoid the excitation of the edge scattering fields and the involvement of numerical instabilities caused by interior resonance, which occur in the conventional TDBEM.

This paper proposes a new power-factor-correction (PFC) topology, and explains its operation principle, its control mechanism, related application problems followed by experimental results. In this proposed topology, critical-conduction-mode (CRM) interleaved technique is applied to a bridgeless PFC in order to achieve high efficiency by combining benefits of each topology. This application is targeted toward low to middle power applications that normally employs continuous-conduction-mode boost converter.

This report describes a quantification method for luminance non-uniformity of a large LED backlight. In experiments described herein, participants subjectively evaluated artificial indistinct Mura images that simulated luminance non-uniformity of an LED backlight. We measured the luminance distribution of the Mura images. Then, the measured luminance distribution was converted into S-CIELAB, in which anisotropic properties of the spatial frequency response of human vision were considered. Subsequently, some indexes for the quantification model were extracted. We conducted multiple regression analyses using the subjective evaluation value and the index values obtained from measured luminance of Mura image. We proposed a quantification model consisting of four indexes: high and low luminance area, number of Mura edges, sum of Mura edge areas, and maximum luminance difference.