In this review, we present recent advances relating to superconducting nanowire single-photon detectors (SSPDs or SNSPDs) and their broad range of applications. During a period exceeding ten years, the system performance of SSPDs has been drastically improved, and lately excellent detection efficiencies have been realized in practical systems for a wide range of target photon wavelengths. Owing to their advantages such as high system detection efficiency, low dark count rate, and excellent timing jitter, SSPDs have found application in various research fields such as quantum information, quantum optics, optical communication, and also in the life sciences. We summarize the photon detection principle and the current performance status of practical SSPD systems. In addition, we introduce application examples in which SSPDs have been applied.

The physics and applications of superconducting phase shifts and their control in superconducting systems are reviewed herein. The operation principle of almost all superconducting devices is related to the superconducting phase, and an efficient control of the phase is crucial for improving the performance and scalability. Furthermore, employing new methods to shift or control the phase may lead to the development of novel superconducting device applications, such as cryogenic memory and quantum computing devices. Recently, as a result of the progress in nanofabrication techniques, superconducting phase shifts utilizing π states have been realized. In this review, following a discussion of the basic physics of phase propagation and shifts in hybrid superconducting structures, interesting phenomena and device applications in phase-shifted superconducting systems are presented. In addition, various possibilities for developing electrically and magnetically controllable 0 and π junctions are presented; these possibilities are expected to be useful for future devices.

We review a new superconducting element, called “magnetic Josephson junctions” with a magnetic barrier instead of the insulating barrier of conventional Josephson junctions. We classify the three types of magnetic barrier, i.e., diluted alloy, conventional ferromagnet, and magnetic multilayer barriers, and introduce various new physics such as the π-state arising in magnetic Josephson junctions due to the interaction between superconductivity and magnetism.

A generalized version of a piece-wise constant (ab. PWC) spiking neuron model is presented. It is shown that the generalization enables the model to reproduce 20 activities in the Izhikevich model. Among the activities, we analyze tonic bursting. Using an analytical one-dimensional iterative map, it is shown that the model can reproduce a burst-related bifurcation scenario, which is qualitatively similar to that of the Izhikevich model. The bifurcation scenario can be observed in an actual hardware.

We report on the enhancement of system detection efficiency in a superconducting nanowire single-photon detector (SNSPD) by applying the optical cavity structure. The nanowire was made using 4-nm-thick NbN thin films and covered with an SiO cavity and Au mirror designed for 1300-1600 nm wavelengths. The device is mounted into fiber-coupled packages, and installed in a practical multichannel system based on GM cryocoolers. System detection efficiency depends on the absorptance of cavity structure, and reached 28% and 40% at 1550 nm and 1310 nm wavelengths, respectively. These values were considerably higher than an SNSPD without optical cavity.

Superconducting nanowire single-photon detectors(SSPDs or SNSPDs) can detect single photons in a wide spectrum range from ultraviolet to mid-infrared wavelengths. We developed SSPDs for the light wavelength of 900-1100 nm, where it is difficult to achieve high detection efficiency by either Si or InGaAs avalanche photodiodes. We designed and fabricated the SSPD with non-periodic dielectric multilayers (DMLs) composed of SiO2 and TiO2 to enhance the optical absorptance in the wavelength range of 900-1100 nm. We measured the detection efficiency (DE) in the wavelength range of 800-1360 nm using a supercontinuum light source and found that the wavelength dependence of DE was in good agreement with the simulated spectrum of the optical absorptance of the nanowire device on the designed DML. The highest system DE was 81.0% for the wavelength of 980 nm.

We report the energy-efficient optical input interface using NbN superconducting nanowire-based optical-to-electrical (SN-OE) converters for a single-flux-quantum (SFQ) data processing system. The SN-OE converters with small active areas ranging from 1$, imes,$1 to 10$, imes,$10,$mu$m$^2$ were fabricated to improve the recovery time by reducing the kinetic inductance of the nanowire. The SN-OE with the smallest area of 1$, imes,$1 $mu$m$^2$ showed the recovery time of around 0.3 ns, while its detection efficiency for a single photon was reduced below 0.1% due to insufficient coupling efficiency with a single-mode optical fiber. However, the optical power dependence of the error rate of this device showed that the required optical power to achieve the error rate below $10^{-12}$ at 10 GHz operation is as large as 70 $mu$W, which is still one order of magnitude lower than semiconductor photo diodes. We also demonstrated the operation of the SN-OE converters combined with the SFQ readout circuit and confirmed the operating speed up to 77~MHz.