An optical add-drop multiplexer with a grating-loaded directional coupler in silica waveguides is demonstrated. The device for this configuration has a large fabrication tolerance and is small in size. A new scheme, in which the coupling length of the directional coupler is twice the complete coupling length, enables low cross-talk for both add and drop operations. This device is polarization-independent due to its relatively low-temperature process.

An optical add-drop multiplexer with a grating-loaded directional coupler in silica waveguides is demonstrated. The device for this configuration has a large fabrication tolerance and is small in size. A new scheme, in which the coupling length of the directional coupler is twice the complete coupling length, enables low cross-talk for both add and drop operations. This device is polarization-independent due to its relatively low-temperature process.

A newly developed hybrid-integrated Symmetric Mach-Zehnder (HI-SMZ) all-optical switch is reported. For integration, we chose the Symmetric Mach-Zehnder (SMZ) structure rather than the Polarization-Discriminating Symmetric Mach-Zehnder (PD-SMZ) structure which is similar to SMZ but more often used in experiments using discrete optical components. We discuss advantages and disadvantages of SMZ and PD-SMZ to show that SMZ is more suitable for integration. We also discuss about the use of SOAs as nonlinear elements for all-optical switches. We conclude that, although the ultrafast switching capability of SMZ is limited by the gain compression of SOAs, the very low switching energy is more important for practical devices. We then describe the HI-SMZ all-optical switch. This integration scheme has advantages which include low loss, low dispersion silica waveguides for high speed operation and ease in large scale integration of many SMZs with other optical, electrical, and opto-electrical devices. We show that a very high dynamic extinction ratio is possible with HI-SMZ. We also examine HI-SMZ with 1 ps pulses to show its ultrafast capability. Finally, we describe a 168 to 10.5 Gbps error-free demultiplexing experiment which is to our best knowledge the fastest experiment with an integrated device.

The hybrid electrical/optical multi-chip integration technique for optical modules for optical network system has been developed. Employing the technique, a 44 broadcast-and-select type optical matrix switch module has been realized. The module consists of four sets of silica waveguide 1 : 4 splitters/4 : 1 combiners, four 4-channel arrays of polarization insensitive semiconductor optical amplifiers with spot-size converters as optical gates, printed wiring chips for electrical wiring and single mode fibers for optical signal interface on planar waveguide platform fabricated by atmospheric pressure chemical vapor deposition. All the gates and the wiring chips were mounted precisely onto the platform at once in flip-chip manner by self-align technique using AuSn solder bumps. Coupling loss between the waveguide and the SOA gate was estimated to be 4.5 dB. Averaged fiber-to-fiber signal gain, on-off ratio and polarization dependent loss for each of the signal paths was 7 dB 2 dB, more than 40 dB and 0.5 dB, respectively. High speed 10 Gb/s photonic cell switching as short as 2 nsec has been successfully achieved.

The hybrid electrical/optical multi-chip integration technique for optical modules for optical network system has been developed. Employing the technique, a 44 broadcast-and-select type optical matrix switch module has been realized. The module consists of four sets of silica waveguide 1 : 4 splitters/4 : 1 combiners, four 4-channel arrays of polarization insensitive semiconductor optical amplifiers with spot-size converters as optical gates, printed wiring chips for electrical wiring and single mode fibers for optical signal interface on planar waveguide platform fabricated by atmospheric pressure chemical vapor deposition. All the gates and the wiring chips were mounted precisely onto the platform at once in flip-chip manner by self-align technique using AuSn solder bumps. Coupling loss between the waveguide and the SOA gate was estimated to be 4.5 dB. Averaged fiber-to-fiber signal gain, on-off ratio and polarization dependent loss for each of the signal paths was 7 dB 2 dB, more than 40 dB and 0.5 dB, respectively. High speed 10 Gb/s photonic cell switching as short as 2 nsec has been successfully achieved.