One major challenge to implement orthogonal frequency division multiplexing (OFDM) systems over doubly selective channels is the non-negligible intercarrier interference (ICI), which significantly degrades the system performance. Existing solutions to cope with ICI include zero-forcing (ZF), minimum mean square error (MMSE) and other linear or nonlinear equalization methods. However, these schemes fail to achieve a satisfactory tradeoff between performance and computational complexity. To address this problem, in this paper we propose two novel nonlinear ICI cancellation techniques, which are referred to as parallel interference cancelation (PIC) and hybrid interference cancelation (HIC). Taking advantage of the special structure of basis expansion model (BEM) based channel matrices, our proposed schemes enjoy low computational complexity and are capable of cancelling ICI effectively. Moreover, since the proposed schemes can flexibly select different basis functions and be independent of the channel statistics, they are applicable to practical OFDM based systems such as DVB-T2 over doubly selective channels. Theoretical analysis and simulation results both confirm their performance-complexity advantages in comparison with some existing methods.

Network emulation system constructs a virtual network environment which has the characteristics of controllable and repeatable network conditions. This makes it possible to predict the correctness and performance of proposed new technology before deploying to Internet. In this paper we present a methodology for evaluating the correctness and performance of applications based on the PARNEM, a parallel discrete event network emulator. PARNEM employs a BSP based real-time event scheduling engine, provides flexible interactive mechanism and facilitates legacy network models reuse. PARNEM allows detailed and accurate study of application behavior. Comprehensive case studies covering bottleneck bandwidth measurement and distributed cooperative web caching system demonstrate that network emulation technology opens a wide range of new opportunities for examining the behavior of applications.

A simple yet effective time domain correlation channel estimation method is proposed for multiple-input multiple-output (MIMO) systems over dispersive channels. It is known that the inherent co-channel interference (CCI) and inter-symbol interference (ISI) coexist when the signals propagate through MIMO frequency selective channels, which renders the MIMO channel estimation intractable. By elaborately devising the quasi-orthogonal training sequences between multiple antennas which have constant autocorrelation property with different cyclic shifts in the time domain, the interferences induced by ISI and CCI can be simultaneously maintained at a constant and identical value under quasi-static channels. As a consequence, it is advisable to implement the joint ISI and CCI cancelation by solving the constructed linear equation on the basis of the correlation output with optional correlation window. Finally, a general and simplified closed-form expression of the estimated channel impulse response can be acquired without matrix inversion. Additionally, the layered space-time (LST) minimum mean square error (MMSE) (LST-MMSE) frequency domain equalization is briefly described. We also provide some meaningful discussions on the beginning index of the variable correlation window and on the cyclic shift number of m-sequence of other antennas relative to the first antenna. Simulation results demonstrate that the proposed channel estimation approach apparently outperforms the existing schemes with a remarkable reduction in computational complexity.

This paper describes the design and implementation of a multi-threaded Distributed Shared Memory (DSM) system, called Cohesion, which provides high programming flexibility and latency masking, and supports load balancing. Cohesion offers a parallel programming environment which is very similar to that on a multiprocessors system. Threads could be created recursively in this environment, and users are not required to handle the locations of the threads. Instead of supporting a shared variable model, Cohesion provides a global shared address space among all nodes in the system. The space is further divided into three regions, i. e. , release, conventional, and object-based memory, each is applied with different consistency protocol. In this paper, the design issues in an ordinary thread system, such as thread management, load balancing, and synchronization, have been reconsidered with the memory management provided by the DSM system. Several real applications have been used to evaluate the performance of the system. The results show that multi-threading usually has better performance than single-threading because the network latency can be masked by overlapping communication and computation. However, the gain depends on program behavior and the number of threads executed on each node in the system.

An autoencoder is trained to generate the background from the surveillance image by setting the training label as the shuffled input, instead of the input itself in a traditional autoencoder. Then the multi-scale features are extracted by a sparse autoencoder from the surveillance image and the corresponding background to detect foreground.

This paper studies an underlay-based cognitive two-way relay network which consists of a primary network (PN) and a secondary network (SN). Two secondary users (SUs) exchange information with the aid of multiple single-antenna amplify-and-forward relays while a primary transmitter communicates with a primary receiver in the same spectrum. Unlike the existing contributions, the transmit powers of the SUs and the distributed beamforming weights of the relays are jointly optimized to minimize the sum interference power from the SN to the PN under the quality-of-service (QoS) constraints of the SUs determined by their output signal-to-interference-plus-noise ratio (SINR) and the transmit power constraints of the SUs and relays. This approach leads to a non-convex optimization problem which is computationally intractable in general. We first investigate two necessary conditions that optimal solutions should satisfy. Then, the non-convex minimization problem is solved analytically based on the obtained conditions for single-relay scenarios. For multi-relay scenarios, an iterative numerical algorithm is proposed to find suboptimal solutions with low computational complexity. It is shown that starting with an arbitrarily initial feasible point, the limit point of the solution sequence derived from the iterative algorithm satisfies the two necessary conditions. To apply this algorithm, two approaches are developed to find an initial feasible point. Finally, simulation results show that on average, the proposed low-complexity solution considerably outperforms the scheme without source power control and performs close to the optimal solution obtained by a grid search technique which has prohibitively high computational complexity.

Under the background of non-homogenous and dynamic time-varying clutter, the processing ability of the traditional constant false alarm rate (CFAR) detection algorithm is significantly reduced, as well as the detection performance. This paper proposes a CFAR detection algorithm based on clutter knowledge (CK-CFAR), as a new CFAR, to improve the detection performance adaptability of the radar in complex clutter background. With the acquired clutter prior knowledge, the algorithm can dynamically select parameters according to the change of background clutter and calculate the threshold. Compared with the detection algorithms such as CA-CFAR, GO-CFAR, SO-CFAR, and OS-CFAR, the simulation results show that CK-CFAR has excellent detection performance in the background of homogenous clutter and edge clutter. This algorithm can help radar adapt to the clutter with different distribution characteristics, effectively enhance radar detection in a complex environment. It is more in line with the development direction of the cognitive radar.

Since the dark channel prior (DCP)-based dehazing method is ineffective in the sky area and will cause the problem of too dark and color distortion of the image, we propose a novel dehazing method based on sky area segmentation and image fusion. We first segment the image according to the characteristics of the sky area and non-sky area of the image, then estimate the atmospheric light and transmission map according to the DCP and correct them, and then fuse the original image after the contrast adaptive histogram equalization to improve the details information of the image. Experiments illustrate that our method performs well in dehazing and can reduce image distortion.

This letter presents a global feature-based method for evaluating the no reference quality of scanning electron microscopy (SEM) contrast-distorted images. Based on the characteristics of SEM images and the human visual system, the global features of SEM images are extracted as the score for evaluating image quality. In this letter, the texture information of SEM images is first extracted using a low-pass filter with orientation, and the amount of information in the texture part is calculated based on the entropy reflecting the complexity of the texture. The singular values with four scales of the original image are then calculated, and the amount of structural change between different scales is calculated and averaged. Finally, the amounts of texture information and structural change are pooled to generate the final quality score of the SEM image. Experimental results show that the method can effectively evaluate the quality of SEM contrast-distorted images.