In this paper, we present a novel class of long quasi-cyclic low-density parity-check (QC-LDPC) codes. Each of the codes in this class has a structure formed by concatenating single-parity-check codes and QC-LDPC codes of shorter lengths, which allows for efficient, high throughput encoder/decoder implementations. Using a code in this class, we design a forward error correction (FEC) scheme for optical transmission systems and present its high throughput encoder/decoder architecture. In order to demonstrate its feasibility, we implement the architecture on a field programmable gate array (FPGA) platform. We show by both FPGA-based simulations and measurements of an optical transmission system that the FEC scheme can achieve excellent error performance and that there is no significant performance degradation due to the constraint on its structure while getting an efficient, high throughput implementation is feasible.

This paper describes the distortion properties created by self-phase modulation in super wideband FM converted 40 AM/30 64-QAM CATV and super-high-frequency RF converted 8 BS/12 CS TV signal transmission based on the optical SSB modulation scheme.

Application of microwave and millimeter-wave circuit technologies to InGaP-HBT ICs for 40-Gbps optical-transmission systems is demonstrated from two aspects. First, ICs for various important functions -- amplification of data signals, amplification, frequency doubling, and phase control of clock signals -- are successfully developed based on microwave and millimeter-wave circuit configurations mainly composed of distributed elements. A distributed amplifier exhibits ≥164-GHz gain-bandwidth product with low power consumption (PC) of 71.2 mW. A 20/40-GHz-band frequency doubler achieves wideband performance (40%) with low PC (26 mW) by integrating a high-pass filter and a buffer amplifier (as a low-pass filter). A compact 40-GHz analog phase shifter, 20- and 40-GHz-band clock amplifiers with low PC are also realized. Second, a familiar concept in microwave-circuit design is applied to a high-speed digital circuit. A new approach -- inserting impedance-transformer circuits -- to enable 'impedance matching' in digital ICs is successfully applied to a 40-Gbps decision circuit to prevent unwanted gain peaking and jitter increase caused by transmission lines without sacrificing chip size.

This paper starts by describing the advantages of cascaded modulation, i.e., using multiple concatenated external modulators to modulate CW (Continuous Wave) light. Next, the paper examines computer simulations of the resulting modulated light waveform shapes and intermodulation distortion values to elucidate the basic modulation characteristics of a cascaded modulation scheme. Examples of applying cascaded modulation to a multi-channel optical signal transmission system are shown, and the characteristics are clarified by optical transmission experiments. For example, the dependency of the signal quality on the modulation depth values of each external modulator is clarified. Moreover, experiments show that cascaded modulation permits the remote insertion of local broadcast programs into wide area broadcast programs. Last, the paper shows that cascaded modulation offers better modulation properties than the conventional single modulation approach.

Various mixed-signal very-high-speed integrated circuits have been developed using InP DHBTs. These circuits have been designed for fiber-optic 43 Gbit/s transmissions applications. They include: on the transmitting side, a clocked driver and an EAM driver, as well as a PSBT/DQPSK precoder; on the receiving side, a sensitive decision circuit, a limiting amplifier and an eye monitor. System experiments made possible by these circuits include a 6 Tbit/s transmission on >6000 km distance.

This paper proposes a simple timing synchronization method in order to design a timing synchronization circuit with low-complex and low-volume digital signal processing (DSP) for orthogonal frequency division multiplexing (OFDM) packet transmission systems. The proposed method utilizes the subtraction process for acquirement of a timing metric of fast Fourier transform (FFT) window, whereas the conventional methods utilize the multiplication process. This paper adopts the proposed method to a standardized OFDM format, IEEE 802.11a, and elucidates that the proposed one shows good transmission performance as well as the conventional one in fast time-variant multi-path Rayleigh fading channels by computer simulation.

Based on a modified step-by-step decoding procedure, a high-speed pipelined Reed-Solomon decoder is presented. The decoder requires only the delay time of three 2-input XOR gates for decoding each coded symbol. The decoder can be operated in a bit rate of Gbits/sec order and thus suitable for the very high speed data transmission systems.

We developed an optical transceiver diode (TRAD) module for bi-directional time-compression-multiplexing (TCM) transmission systems. A wavelength-insensitive structure as a receiver and a low-capacitance configuration in the module provide a high sensitivity. Stable switching of 156 Mbit/s NRZ burst signals between the transmitter and receiver modes is achieved. In addition, it is shown that optical module cost can be further reduced by using passive alignment on a Si bench.

We developed an optical transceiver diode (TRAD) module for bi-directional time-compression-multiplexing (TCM) transmission systems. A wavelength-insensitive structure as a receiver and a low-capacitance configuration in the module provide a high sensitivity. Stable switching of 156 Mbit/s NRZ burst signals between the transmitter and receiver modes is achieved. In addition, it is shown that optical module cost can be further reduced by using passive alignment on a Si bench.

We demonstrate a very simple and compact optical transceiver diode module using a passive alignment on a silicon bench with a V-groove. The excess loss caused by the passive alignment of an optical transceiver diode and a flat-end optical fiber is only 0. 6 dB. A high coupling efficiency of -4. 3 dB is obtained. This results in a high responsivity with a wavelength- and polarization-independence of 0. 5 dB over a 70 nm wavelength range and in good laser performance.

In this paper we review the stretched-pulse principle and discuss its inherent advantages for ultrashort pulse generation and transmission. An analytic theory of the stretched-pulse fiber laser is presented and shown to be in good agreement with experimental results. An extension of the stretched-pulse theory is applied to both fiber lasers and dispersion-allocated soliton transmission and then compared to numerical results. We also discuss the design and operation of an environmentally stable stretched-pulse fiber laser.

The use of existing metallic local line facilities is being studied for the provision of high-speed digital transmission services. Local line characteristics have to be modeled in the form of the objective requirements that should be met by DSL for estimating the feasibility of the service provision in the actual network. This paper presents the results of a study that models the metallic media characteristics of NTT's local network. First, the line lenghts determined by the existing local line deployment rule and the cable types used in the networks are introduced. Second, the values of crosstalk characteristics, the most significant factors in limiting DSL range, are given by classifying essential line conditioning states of each cable. The values of crosstalk characteristics are newly computed by taking into account detailed cable pair-binding (cabling) structures, and the worst case values among all possible combinations of multiple inter-pair interfering-interfered relationships within a cable are given though a previous study approximated cable pair-binding structures. The crosstalk characteristics of NTT's and American local networks are also compared. A modified approximate equation of line propagation characteristics is also proposed for representative local lines, and its precision is verified by comparing simulation results to actual measurements in both frequency and time domains.

The use of existing metallic local line facilities is being studied for providing "video on demand (VOD)" services to residential subscribers across asymmetric digital subscriber lines (ADSL). ADSL carries a high-rate channel in the downstream direction from a central office (CO) to the subscriber, and a low-rate channel in both directions on an existing 2-wire pair. Audio and video signals are compressed by the moving picture experts group's standardized algorithms (MPEG 1 and MPEG 2), and delivered to the subscriber in the high-rate channel. Control (demand and response) signals are transceived in the low-rate channel. This paper presents the line length coverage of ADSL systems given the environment of NTT's local networks. The bit rates in the downstream and upstream directions are assumed to be 1.6-9.2Mbit/s and 24kbit/s, respectively. Two types of ADSL systems are considered: transceiving ADSL signals using the plain old telephone service (POTS) line or the basic rate access (BRA; 320 kbaud ping-pong transmission system) line on the same 2-wire pair. 16-QAM, 32-QAM and 64-QAM are compared as transmission schemes. Intra-system crosstalk interference (interference between identical transmission systems) and inter-system crosstalk interference (interference between different transmission systems) with the existing digital subscriber lines (DSL) are estimated. It is shown that the inter-system crosstalk interference with BRA is most stringent, and ADSL with 16-QAM yields the best performance in NTT's local networks. This paper concludes that realizing ADSL with 16-QAM can achieve channel capacities of up to 9.2Mbit/s for fiber-in-the-feeder (FITF) access systems, but the possibility of applying ADSL to direct access systems is remote except for a restricted short haul use. Some comparisons regarding American local networks are also described.

This paper presents the results of a study made to determine the line length coverage of the high-bit-rate digital subscriber line (HDSL) present in NTT's local networks. The HDSL carries one bi-directional 784 kbit/s channel per pair and supports the digital interface at 1544kbit/s by using two cable pairs. The primary purpose of this study is to estimate the range limits for candidate transmission schemes considering line installation conditions, and to determine the most promising transmission scheme and its feasibility given the environment of NTT's local networks. Pulse amplitude modulation (PAM) and quadrature amplitude modulation (QAM) transmission schemes are compared for HDSL implementation. It is shown that 2B1Q-PAM and 16-QAM generally achieve better performance than the more complicated PAM and QAM given the presence intra-system crosstalk interference (interference between identical transmission systems). The range limits determined by inter-system crosstalk interference (interference between different transmission systems) with basic rate access (BRA) implementing a burst-mode transmission method are also estimated. This paper concludes that 2B1Q-PAM achieves the best overall performance in NTT's local networks. A feasibility study of 192-6144 kbit/s transmission is also described.

In this paper, we investigate various technology aspects in fiber-to-the-microcell systems. Background studies on radio propagation environment and system operations are provided first. The fundamental linearity characteristics of a directly and externally modulated optical links are analyzed next. An overall comparison between the two types of optical links, and system requirements among all types of wireless systems (from macrocells to picocells) are presented. Future research and development directions are also suggested.

Fiber-optic local area networks (LANs) with Fiber Distributed Digital Interface (FDDI) protocol have come into use as backbones connecting other small LANs. This paper describes the current status of LANs, reviews a number of issues that stand in the way of further development and look at the future of LANs. Demands for wide-area networks (WANs) connecting LANs and multimedia LANs including voice and image capability has been extremely strong, spurring progress in geographical expansion and throughput increase, now over 100Mbit/s. The logical choice of transmission medium for next-generation systems is single-mode optical fiber, not only for backbone LANs but also, eventually, for floor LANs.

Optical fiber transmission systems have advanced rapidly with the advent of highly advanced electronic and optical devices. This paper introduces several IC technologies required for ultra-high-speed optical transmission and overviews current IC technologies used for the existing and developing optical fiber trunk transmission systems. Future trends in device technologies are also discussed.