A 500-MHz and 60-dBΩ CMOS Transimpedance Amplifier Using the New Feedforward Stabilization Technique

Shinya KAWADA; Yasuhiro SUGIMOTO

doi:10.1093/ietele/e88-c.6.1285

A 500-MHz and 60-dBΩ CMOS Transimpedance Amplifier Using the New Feedforward Stabilization Technique

Shinya KAWADA, Yasuhiro SUGIMOTO

Full Text Views

0

Share
Cite this

Summary :

This paper describes a method of extending the signal frequency bandwidth while increasing the stability of a CMOS transimpedance amplifier (TIA). The TIA consists of three inverting amplifiers in a series, and a high-pass filter plus a non-inverting amplifier that are connected to the last two inverting amplifiers stated above in parallel. The TIA is fabricated using a 0.35 µm CMOS process and realizes stable conversion of 60-dBΩ from the photodiode current to the output voltage with more than 500 MHz of signal frequency bandwidth and 60 mW of power consumption from a 3.3 V supply voltage.

Publication: IEICE TRANSACTIONS on Electronics Vol.E88-C No.6 pp.1285-1287

Publication Date: 2005/06/01

Publicized

Online ISSN

DOI: 10.1093/ietele/e88-c.6.1285

Type of Manuscript: Special Section LETTER (Special Section on Analog Circuit and Device Technologies)

Category: Optical

Cite this

Copy

Shinya KAWADA, Yasuhiro SUGIMOTO, "A 500-MHz and 60-dBΩ CMOS Transimpedance Amplifier Using the New Feedforward Stabilization Technique" in IEICE TRANSACTIONS on Electronics, vol. E88-C, no. 6, pp. 1285-1287, June 2005, doi: 10.1093/ietele/e88-c.6.1285.
Abstract: This paper describes a method of extending the signal frequency bandwidth while increasing the stability of a CMOS transimpedance amplifier (TIA). The TIA consists of three inverting amplifiers in a series, and a high-pass filter plus a non-inverting amplifier that are connected to the last two inverting amplifiers stated above in parallel. The TIA is fabricated using a 0.35 µm CMOS process and realizes stable conversion of 60-dBΩ from the photodiode current to the output voltage with more than 500 MHz of signal frequency bandwidth and 60 mW of power consumption from a 3.3 V supply voltage.
URL: https://globals.ieice.org/en_transactions/electronics/10.1093/ietele/e88-c.6.1285/_p

Copy

@ARTICLE{e88-c_6_1285,
author={Shinya KAWADA, Yasuhiro SUGIMOTO, },
journal={IEICE TRANSACTIONS on Electronics},
title={A 500-MHz and 60-dBΩ CMOS Transimpedance Amplifier Using the New Feedforward Stabilization Technique},
year={2005},
volume={E88-C},
number={6},
pages={1285-1287},
abstract={This paper describes a method of extending the signal frequency bandwidth while increasing the stability of a CMOS transimpedance amplifier (TIA). The TIA consists of three inverting amplifiers in a series, and a high-pass filter plus a non-inverting amplifier that are connected to the last two inverting amplifiers stated above in parallel. The TIA is fabricated using a 0.35 µm CMOS process and realizes stable conversion of 60-dBΩ from the photodiode current to the output voltage with more than 500 MHz of signal frequency bandwidth and 60 mW of power consumption from a 3.3 V supply voltage.},
keywords={},
doi={10.1093/ietele/e88-c.6.1285},
ISSN={},
month={June},}

Copy

TY - JOUR
TI - A 500-MHz and 60-dBΩ CMOS Transimpedance Amplifier Using the New Feedforward Stabilization Technique
T2 - IEICE TRANSACTIONS on Electronics
SP - 1285
EP - 1287
AU - Shinya KAWADA
AU - Yasuhiro SUGIMOTO
PY - 2005
DO - 10.1093/ietele/e88-c.6.1285
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E88-C
IS - 6
JA - IEICE TRANSACTIONS on Electronics
Y1 - June 2005
AB - This paper describes a method of extending the signal frequency bandwidth while increasing the stability of a CMOS transimpedance amplifier (TIA). The TIA consists of three inverting amplifiers in a series, and a high-pass filter plus a non-inverting amplifier that are connected to the last two inverting amplifiers stated above in parallel. The TIA is fabricated using a 0.35 µm CMOS process and realizes stable conversion of 60-dBΩ from the photodiode current to the output voltage with more than 500 MHz of signal frequency bandwidth and 60 mW of power consumption from a 3.3 V supply voltage.
ER -