A thermo-optic phase shifter consisting of a thin film heater deposited on a bridge-suspended silica waveguide on a silicon substrate is proposed for reducing electric power consumption of the phase shifter. A successful application to a guided-wave 22 optical switch is demonstrated. The electric power consumption has been reduced to 1/2 to 1/10 depending on the bridge structure.

A 1.55-µm hybrid integrated wavelength-converter module was fabricated using a two-channel spot-size converter integrated semiconductor optical amplifier (SS-SOA) on a planar-lightwave-circuit (PLC) platform. Clear eye opening and penalty-free wavelength conversion were obtained at 2.5-Gb/s modulation with a wide wavelength difference of 46 nm. The module showed good characteristics including low insertion loss (0.1 dB), and high conversion efficiency (-0.2 dB). It also showed stable wavelength conversion for as wide as a 13 temperature range.

A 1.55-µm hybrid integrated wavelength-converter module was fabricated using a two-channel spot-size converter integrated semiconductor optical amplifier (SS-SOA) on a planar-lightwave-circuit (PLC) platform. Clear eye opening and penalty-free wavelength conversion were obtained at 2.5-Gb/s modulation with a wide wavelength difference of 46 nm. The module showed good characteristics including low insertion loss (0.1 dB), and high conversion efficiency (-0.2 dB). It also showed stable wavelength conversion for as wide as a 13 temperature range.

We have reviewed recent progress on arrayed waveguide gratings for DWDM applications. AWGs can be used to realize not only mux/demux filters with various channel spacings, but also highly integrated optical components.

A strictly nonblocking 88 matrix switch was designed and fabricated using silica-based planar lightwave circuits (PLC) on a silicon substrate. The average insertion loss was 11 dB in the TE mode and 11.3 dB in the TM mode. The average switch element extinction ratio was 16.7 dB in the TE mode and 17.7 dB in the TM mode. The accumulated crosstalk was estimated to be 7.4 dB in the TE mode and 7.6 dB in the TM mode. The driving power of the phase shifter required for switching was about 0.5 W and the polarization dependence of the switching power was 4%. The switching response time was 1.3 msec. The wavelength range with a switch extinction ratio of over 15 dB was 1.31 µm30 nm.