In bit-patterned media recording (BPMR), the readback signal is severely corrupted by the inter-symbol interference (ISI) and inter-track interference (ITI), especially at high recording densities, due to small bit and track pitches. One way to alleviate the ITI effect is to encode an input data sequence before recording, so as to avoid some data patterns that easily cause an error at the data detection process. This paper proposes an ITI-mitigating 5/6 modulation code for a multi-track multi-head BPMR system to eliminate the data patterns that lead to severe ITI. Specifically, each of the 5 user bits is converted into a 6-bit codeword in the form of a 3-by-2 data array, based on a look-up table. Experimental results indicate that the system with the proposed coding scheme outperforms that without coding, especially when an areal density is high and/or the position jitter is large.

To achieve high recording density in a bit-patterned media recording system, the spacing between data bit islands in both the along-track and the across-track directions must be decreased, thus leading to the increase of two-dimensional (2D) interference. One way to reduce the 2D interference is to apply a 2D coding scheme on a data sequence before recording; however, this method usually requires many redundant bits, thus lowering a code rate. Therefore, we propose a novel 2D coding scheme referred to as a recorded-bit patterning (RBP) scheme to mitigate the 2D interference, which requires no redundant bits at the expense of using more buffer memory. Specifically, an input data sequence is first split into three tracks in which will then be rotated to find the best 3-track data pattern based on a look-up table before recording, such that the shifted data tracks yield the least effect of 2D interference in the readback signal. Numerical results indicate that the proposed RBP scheme provides a significant performance improvement if compared to a conventional system (without 2D coding), especially when the recording density is high and/or the position jitter noise is large.