We propose a design methodology of a low-voltage CMOS low-noise amplifier (LNA) consisting of a common-source and a common-gate stages. We first derive equations of power gain, noise figure (NF) and input third-order intercept point (IIP3) of the two-stage LNA. A design methodology of the LNA is presented by using graphs based on analytical equations. A 1-V 5.4-GHz LNA was implemented in 0.15-µm fully-depleted silicon-on-insulator (FD-SOI) CMOS technology. Measurement results show a power gain of 23 dB, NF of 1.7 dB and IIP3 of -6.1 dBm with a power consumption of 8.3 mW. These measured results are consistent with calculated results, which ensures the validity of the derived equations and the proposed design methodology.

A new small-signal model for fully depleted silicon-on-insulator (FD-SOI) MOSFETs operating at RF frequencies is presented. The model accounts for the non-quasi-static effect by determining model parameters using a curve fitting procedure to reproduce the frequency response of FD-SOI MOSFETs. The accuracy of the model is validated by comparison of S parameters with measured results in the range from 0.2 GHz to 20 GHz.