This study is intended to realize an in-situ gas sensor based upon the principle of millimeter/submillimeter wave spectroscopy. In-situ gas sensor will be attractive because of gas selectivity, multiple parametric measurement such as gas temperature, pressure and density, and of the in-situ measurement capability. One of the major technical problem to be solved is to develop an instrument accurate enough to discern the spectrum change due to the variation of parameters such as temperature. In this paper a proposed gas absorption measurement system is investigated, which schematically consists of Fabry-Perot type gas cell for effective long path length, and vector signal processing to reject leak signal coupled between resonator input and output ports so as to achieve precise absorption measurement. Also included is an parametric study of oxygen absorption characteristics, which is served as the predicted value in the evaluation of the instrument. The experiment at 60 GHz and 120 GHz bands using oxygen demonstrates the effectiveness of the current system configuration.

Near-field imaging has been intensively investigated to observe the shape and the physical properties of objects, aiming at wide applications in the areas of science and engineering. In this research, by using 60 GHz band waveguide-type microscopic aperture probe, the characteristics of the near-field imaging in transmission mode have been studied by simulation and experiment. The probe is made of a WR-15 rectangular waveguide with end-shielded metal plate and a 0.5 mm-diameter aperture. In the simulation, at first, the electric field distribution at the aperture, at the rear (waveguide) and the front positions (free space) are presented. Second, the transmitted electric fields are presented for three cases: (a) scanning of a dielectric slit, (b) by varying the distance between the aperture and a dielectric sample, and (c) scanning of a dielectric groove. In the experiment, the lateral resolution with a two-slit and the depth resolution with grooves having various depths in rectangular format are described and the results show both resolutions to be much shorter than the wavelength. Finally, the scanned images of the letter N punched through a dielectric material and a leaf are demonstrated.

The design of microstrip bandpass filters using stepped-impedance resonators (SIRs) is examined. The passband center frequency for the WCDMA-FDD (uplink band) Japanese cellular system is 1950 MHz with a 60-MHz bandwidth. The SIR physical characteristic can be designed using a SIR characteristic chart based on second harmonic suppression. In our filter design, passband design charts were obtained through the design procedure. Tchebycheff and maximally flat bandpass filters of any bandwidth and any number of steps can be designed using these passband design charts. In addition, sharp skirt characteristics in the passband can be realized by having two transmission zeros at both adjacent frequency bands by using open-ended quarter-wavelength stubs at input and output ports. A new even-mode harmonics suppression technique is proposed to enable a wide rejection band having a high suppression level. The unloaded quality factor of the resonator used in the proposed filters is greater than 240.