We numerically demonstrate a possibility on-off keying (OOK) type of modulation over tens gigabits per second for sub-terahertz radiation in our proposed wireless transmitter device structure towards radio over fiber (RoF) technology. The integrated device consists of an InP-based compound semiconductor resonant tunneling diode (RTD) adjacent to an InP-based photo diode (PD), a self-complementary type of bow-tie antenna (BTA), external microstrip lines. These integration structures are carefully designed to obtain robust relaxation oscillation (RO) due to the negative differential conductance (NDC) characteristic of the RTD and the nonlinearity of the NDC. Moreover, the device is designed to exhibit OOK modulation of RO due to photo current from the PD inject into the RTD. Electromagnetic simulations and nonlinear equivalent circuit model of the whole device structure are established to perform large signal analysis numerically with considerations of previously measured characteristics of the triple-barrier RTD.

We investigate a finite-sized self-complementary bow-tie antenna (SC-BTA) integrated with a semiconductor mesa with respect to radiation characteristics such as the peak radiation frequency and bandwidth around the fundamental radiation mode. For this investigation, we utilize an equivalent circuit model of the SC-BTA derived in our previous work and a finite element method solver. Moreover, we derive design guidelines for the radiation characteristics in the form of size scaling-rules with respect to the antenna outer size for a terahertz transmitter.

We have derived the physics-based equivalent circuit model of a semiconductor-integrated bow-tie antenna (BTA) for expressing its impedance and radiation characteristics as a terahertz transmitter. The equivalent circuit branches and components, consisting of 16 RLC parameters are determined based on electromagnetic simulations. All the values of the circuit elements are identified using the particle swarm optimization (PSO) that is one of the modern multi-purpose optimization methods. Moreover, each element value can also be explained by the structure of the semiconductor-integrated BTA, the device size, and the material parameters.

It has been reported that by adding two folded elements, bow-tie antenna can be miniaturized, but the antenna has VSWR degradation problem. In this paper, the details of the VSWR degradation are investigated and the physical mechanism of the degradation is clarified. The best position for folded element is also shown. Moreover, the bow-tie antenna is bent in half in order to realize more size reduction. When the two folded elements are added to the half bent bow-tie antenna, the lowest operation frequency goes down and the proposed antenna can be more downsized than the previous proposed antenna. The gain is slightly lower than that of the previous model, however, the antenna area is reduced from 31%, which is the antenna area ratio of privious proposed antenna and conventional bow-tie antenna, to 19%. The bandwidth of 92% is obtained for VSWR≤2.

An empirical formula of resonant frequency of bow-tie microstrip antennas is presented, which is based on the cavity model of microstrip patch antennas. A procedure to design a bow-tie antenna using genetic algorithm (GA) in which we take the formula as a fitness function is also given. An optimized bow-tie antenna by genetic algorithm was constructed and measured. Numerical and experimental results are used to validate the formula and GA. The results are in good agreement.