This paper presents a 27.5-29.6GHz fractional-N frequency synthesizer using reference and frequency doublers to achieve low in-band and out-of-band phase-noise for 5G mobile communications. A consideration of the baseband carrier recovery circuit helps estimate phase noise requirement for high modulation scheme. The push-push amplifier and 28GHz balun help achieving differential signals with low out-of-band phase noise while consuming low power. A charge pump with gated offset as well as reference doubler help reducing PD noise resulting in low in-band phase noise while sampling loop filter helps reduce spurs. The proposed synthesizer has been implemented in 65nm CMOS technology achieving an in-band and out-of-band phase noise of -78dBc/Hz and -126dBc/Hz, respectively. It consumes only a total power of 33mW. The jitter-power figure-of-merit (FOM) is -231dB which is the highest among the state of the art >20GHz fractional-N PLLs using a low reference clock (<200MHz). The measured reference spurs are less than -80dBc.

This paper shows a new pulse swallow programmable frequency divider with the division step size of 0.5. To realize the division step size of 0.5 by a conventional pulse swallow method, we propose a parallel dual modulus prescaler with the division ratio of P and P + 0.5. It consists of simple circuit elements and has an advantage over the conventional dual modulus prescaler with the division step size of 0.5 in high frequency operation. The proposed parallel dual modulus prescaler with the division ratio 8 and 8.5 is implemented in the 0.13-µm CMOS technology. The proposed architecture achieves 7 times higher frequency operation than the conventional one theoretically. It is verified the functions over 5 GHz.

The multistage noise-shaping (MASH) delta-sigma modulator (DSM) is the key element in a fractional-N frequency synthesizer. A hardware simplification method with subtraction inversion is proposed for delta-path's design in a MASH delta-sigma modulator. The subtraction inversion method focuses on simplification of adder-subtractor unit in the delta path with inversion of subtraction signal. It achieves with less hardware cost as compared with the conventional approaches. As a result, the hardware organization is regular and easy for expanding into higher order MASH DSM design. Analytical details of the implementation way and hardware cost function with N-th order configuration are presented. Finally, simulations with hardware description language as well as synthesis data verified the proposed design method.

A Verilog-AMS model of a fractional-N frequency synthesizer is presented that is capable of predicting spurious tones as well as noise and jitter performance. The model is based on a voltage-domain behavioral simulation. Simulation efficiency is improved by merging the voltage controlled oscillator (VCO) and the frequency divider. Due to the benefits of Verilog-AMS, the ΔΣ modulator which is incorporated in the synthesizer is modeled in a fully digital way. This makes it accurate enough to evaluate how the performance of the frequency synthesizer is affected by cyclic behavior in the ΔΣ modulator. The spur-minimizing effect of an odd initial condition on the first accumulator of the ΔΣ modulator is verified. Sequence length control and its effect on the fractional-N frequency synthesizer are also discussed. The simulated results are in agreement with prior published data on fractional-N synthesizers and with new measurement results.