The paper presents capability of signal detection for realizing coexistence between broadband wireless access (BWA) systems and ultra wideband (UWB) devices. The capability is experimentally evaluated for baseband signals of downlink (DL) in both mobile WiMAX and 3GPP LTE. An UWB receiver based on fast Fourier transform (FFT) compliant with MB-OFDM standard is implemented as a detector of the BWA signals. The capability is evaluated in terms of elapsed time required to achieve signal detection with probability of 99% by the implemented FFT-based UWB receiver at different conditions of the receiver. Decisions on the signal detection are made by the simplest method which is by setting a threshold which is determined by noise floor of the receiver as reference. The experiments have been conducted though baseband signals for both AWGN and multipath fading channels without any synchronization between the DL signals and UWB receiver. In AWGN environment, results show that the elapsed time depends on the duty ratio of the DL signal to be detected, however, the correlation between the required time and duty ratio is not linear since their envelopes of the DL signals are not constant. In multipath fading environments based on channel models commonly employed as mobile radio environments, the required time for the signal detection becomes as 17 times longer than that in AWGN due to its signal attenuation. For robust signal detection in multipath fading environments, it has been revealed that the number of quantization bits at ADC is crucial through the experiments.

A time-reversal (TR) approach with multiple signal classification (MUSIC) provides super-resolution for detection and localization using multistatic data collected from an array antenna system. The theory of TR-MUSIC assumes that the number of antenna elements is greater than that of scatterers (targets). Furthermore, it requires many sets of frequency-domain data (snapshots) in seriously noisy environments. Unfortunately, these conditions are not practical for real environments due to the restriction of a reasonable antenna structure as well as limited measurement time. We propose an approach that treats both noise reduction and relaxation of the transceiver restriction by using a time-domain gating technique accompanied with the Fourier transform before applying the TR-MUSIC imaging algorithm. Instead of utilizing the conventional multistatic data matrix (MDM), we employ a modified MDM obtained from the gating technique. The resulting imaging functions yield more reliable images with only a few snapshots regardless of the limitation of the antenna arrays.

Power patterns in the frequency domain are usually used to describe the antenna performance in narrowband communication systems; however, they are not sufficient for ultra wideband (UWB) antennas in wideband communication systems. In this paper, energy pattern and energy gain are introduced to describe the performance of UWB antennas. Numerical simulations and measurements are used to demonstrate the difference between power patterns and energy patterns for narrowband Yagi-Uda antenna, UWB CPW–fed bow-tie slot antenna, and UWB comb taper slot antenna. The results of simulations and measurements are agreement not only in energy pattern, but also in received voltage at various observation angles. For narrowband antennas, the energy patterns are similar to that of the power patterns in the main beam region. However, there are quite differences between power pattern in frequency domain and energy pattern in time domain for UWB antennas.

The objective of this study is to investigate the feasibility of an ultra wideband (UWB) impulse radio system for in-body to off-body wireless communication for biomedical applications. At first, a UWB antenna is designed in the UWB low band for implant use in the chest. Then the channel model is extracted and established based on the finite difference time domain (FDTD) simulation with an anatomical human body model. The established channel model consists of a small set of parameters for generating discrete time impulse responses. The generated model shows good agreement with the FDTD-calculated result in terms of key communication metrics. For effective communication over the multipath-affected channel, the pulse position modulation is employed and a 2-finger RAKE structure with a constant temporal delay is proposed in the receiver. The bit error rate performance has shown the validity of the system in the in-body to off-body chest channel.

This letter proposes an Ultra WideBand (UWB) channel gain estimation algorithm that is based on frequency response correlation. From data measured in indoor and outdoor environments, the frequency correlation statistics of the UWB channel are characterized by correlation coefficients, which are represented as functions of the frequency separation according to the propagation environments. We use empirically established correlation coefficient models to develop the proposed channel gain estimation algorithm. In this algorithm, unknown channel gains of intermediate frequencies are estimated from known channel gains of neighboring reference frequencies. The performance of the proposed algorithm is evaluated against various configurations of reference frequencies and compared with that of a conventional estimation algorithm using a linear interpolation scheme.

Synchronization poses a major challenge in ultra wideband (UWB) systems due to low signal duty cycles in UWB. This study develops an effective synchronization scheme for frame-differential IR-UWB receivers to improve the synchronization speed. The proposed parallel search mechanism reduces the search region of the symbol boundaries to only a single frame duration. Moreover, only one delay element is needed in each branch, since a shared looped delay-line (SLD) is also proposed to lower the implementation complexity of the parallel search mechanism. Simulations and performance analysis show that the proposed scheme achieves a lower mean square error and a higher probability of detection than other alternatives.

In this paper, we study the capacity and performance of nonorthogonal pulse position modulation (NPPM) for Ultra-Wideband (UWB) communication systems over both AWGN and IEEE802.15.3a channels. The channel capacity of NPPM is determined for a time-hopping multiple access UWB communication system. The error probability and performance bounds are derived for a multiuser environment. It is shown that with proper selection of the pulse waveform and modulation index, NPPM can achieve a higher capacity than orthogonal PPM, and also provide better performance than orthogonal PPM with the same throughput.

To realize the compact ultra-wideband (UWB) bandpass filters, a novel filter prototype with two short-circuited stubs loaded at both sides of a stepped-impedance resonator (SIR) via the parallel coupled lines is proposed based on a distributed filter synthesis theory. The equivalent circuit of this filter is established, while the corresponding 7-pole Chebyshev-type transfer function is derived for filter synthesis. Then, a distributed-circuit-based technique was presented to synthesize the elements' values of this filter. As an example, a FCC UWB filter with the fractional bandwidth (FWB) @ -10 dB up to 110% was designed using the proposed prototype and then re-modeled by commercial microwave circuit simulator to verify the correctness and accuracy of the synthesis theory. Furthermore, in terms of EM simulator, the filter was further-optimized and experimentally-realized by using microstrip line. Good agreements between the measurement results and theoretical ones validate the effectiveness of our technique. In addition, compared with the conventional SIR-type UWB filter without short-circuited stubs, the new one significantly improves the selectivity and out-of-band characteristics (especially in lower one -45 dB@1-2 GHz) to satisfy the FCC's spectrum mask. The designed filter also exhibits very compact size, quite low insertion loss, steep skirts, flat group delay and the easily-fabricatable structure (the coupling gap dimension in this filter is 0.15 mm) as well. Moreover, it should be noted that, in terms of the presented design technique, the proposed filter prototype can be also used to easily realize the UWB filters with other FBW even greater than 110%.

A packet detection method for zero-padded orthogonal frequency division multiplexing (OFDM) transmission is presented. The proposed algorithm effectively conducts packet detection by employing both an M-sample time delayed cross correlation value, and a received signal power calculated by using the received input samples corresponding to the zero padding (ZP) intervals or less.

This paper presents a new transmission scheme of M-ary biorthogonal pulse position modulation (BPPM) in ultra wideband systems. The proposed scheme incorporates position-wise parity information to improve the probability of symbol detection over multipath channels. A linear filter-based channel modification is also introduced to mitigate multipath degradation and maximize the probability of symbol detection by using parity information. The analytical and numerical results show that the proposed scheme achieves a significant improvement of symbol error rate (SER) with very low computational complexity and no symbol delay.

This paper presents a low-complexity equalization for M-ary biorthogonal keying based direct sequence ultra wideband (MBOK DS-UWB) systems. We focus on a Viterbi equalizer, which is based on maximum likelihood sequence estimation (MLSE). To reduce the computational complexity of MLSE-based equalizer, we use two strategies. One is the use of delayed-decision feedback sequence estimation (DDFSE), which is a hybrid estimation between MLSE and decision feedback estimation (DFE). And the other is the truncation of state transition in MLSE by considering MBOK pulse mapping. The reduced complexity sequence estimation is named as reduced state (RS)-DDFSE. By the use of RS-DDFSE, the complexity of Viterbi equalizer for MBOK DS-UWB is significantly reduced, by comparison with that of MLSE. The performance of RS-DDFSE based equalizer is evaluated on multipath fading channel models provided by IEEE802.15.3a. An analysis on trellis diagram of RS-DDFSE and simulation results show that the impact on error rate performance generated by the complexity lower is slight.