In order to improve the cell boundary throughput performance and to extend the coverage area, relaying transmission with relay stations (RSs) is becoming a promising architecture for the next generation cellular systems. However, if RSs are operated in every cell, the interference between cells increases and the throughput improvement effect with RSs is prone to be restricted. In this paper, we propose a scheme reducing the interference from other cells by using packet transmission control. This packet transmitting control technique is realized by the compound scheduling technique with the Proportional fair (PF) scheduling and the Maximum Carrier-to-Interference power Ratio (Max CIR) scheduling. The proposed scheme can improve the throughput around the cell boundary by controlling the timing of transmission of each cell with appropriate power and user assignment. The simulation results show that the proposed method can also improve the fairness of user throughput and system throughput considering the users of whole cell.

In this paper, a novel fusion center controlled media access control (MAC) protocol for physical wireless parameter conversion sensor networks (PHY-C SN), and a transmission power design for each sensor node are proposed. In PHY-C SN, the sensing information is converted to corresponding subcarrier number of orthogonal frequency division multiplexing (OFDM) signals, and all sensor nodes can send sensing information simultaneously. In most wireless sensor network standards, each sensor node detects the surrounding wireless signal through carrier sense. However, sensor nodes cannot send signals simultaneously if carrier sense is applied in PHY-C SN. Therefore, a protocol for PHY-C SN is devised. In the proposed protocol, the fusion center detects the surrounding wireless environment by carrier sense and requests sensing information transmission toward sensor nodes if no other wireless systems are detected. Once the sensor nodes receive the request signal, they transmit sensing information to the fusion center. Further, to avoid harmful interference with surrounding wireless systems, the transmission power of each sensor is designed to suit the considering communication range and avoid interference toward other wireless systems. The effectiveness of the proposed protocol is evaluated by computer simulation. The parameters for collection like the number of collecting sensor nodes and the radius of the collection area are also examined when determining the transmission power of sensor nodes. Results show that highly efficient information collection with reducing interference both from and towards surrounding wireless systems can be implemented with PHY-C SN.

Spread Spectrum (SS) has been widely used for various wireless systems such as cellular systems, wireless local area network (LAN) and so on. Using multiple antennas at the receiver, two-dimensional (2D) RAKE is realized over the time- and the space-domain. However, it should be noted that the 2D-RAKE receiver must detect the bit timing prior to the RAKE combining. In case of deep fading, it is often difficult to detect it due to low signal-to-noise power ratio (SNR). To solve this problem, we propose a new blind 2D-RAKE receiver based on the constant modulus algorithm (CMA). Since it does not need a priori bit timing detection, it is possible to compensate frequency selective fading even in very low SNR environments. The proposed method is particularly suitable for the software defined radio (SDR) architecture. The performance of the proposed method is investigated through computer simulations.

This paper proposes a MAC protocol for efficient broadcasting in wireless ad hoc networks. Pure flooding leads to serious redundant broadcasts, packet contention and packet collisions, known as the broadcast storm problem. This paper focuses on how to reduce the redundant broadcasts. Several protocols to achieve efficient broadcasting have been proposed. However a trade-off exists between the reachability and the broadcasting ratio, which is the ratio of the number of the broadcasting nodes to the number of received nodes. This paper proposes a new MAC protocol for on-demand broadcasting, which is referred to as dialogue-based protocol in order to resolve the trade-off. The dialogue-based protocol employs additional massages which are called as request packets and reply signals. They are exchanged in an on-demand manner, in order that relay candidate nodes recognize its neighbor nodes status whether they have already received the broadcast packets. Finally, by computer simulations, this paper presents that the dialogue-based scheme combines high reachability with low broadcasting ratio by using the low additional massages.

In this paper, a novel synchronization method is proposed for a heterogeneous cognitive radio that combines public safety mobile communication systems (PMCSs) with commercial mobile wireless communication systems (CMWCSs). The proposed method enables self-synchronization of the PMCSs as well as co-synchronization of PMCSs and CMWCSs. In this paper, the self-synchronization indicates that each system obtains own timing synchronization. The co-synchronization indicates that a system recognizes data transmitted from other systems correctly. In our research, we especially focus on PMCS self-synchronization because it is one of the most difficult parts of our proposed cognitive radio that improves PMCS's communication quality. The proposed method is utilized for systems employing differentially encoded π/4 shift QPSK modulation. The synchronization can be achieved by correlating envelopes calculated from a PMCS's received signals with subsidiary information (SI) sent via a CMWCS. In this paper, the performance of the proposed synchronization method is evaluated by computer simulation. Moreover, because this SI can also be used to improve the bit error rate (BER) of PMCSs, BER improvement and efficient SI sending methods are derived, after which their performance is evaluated.

This paper proposes a novel cooperative scheme combining distributed space-time block code (STBC) at physical layer, multiple access protocol at medium access control (MAC) layer and opportunistic routing without complicated routing algorithm for achieving high reliability for vehicle-to-vehicle (V2V) communications. The proposed scheme can reduce interference and collision, and achieve reducing redundant broadcast of safety-related messages for multi-hop vehicular communications on highway. In particular, we propose a novel algorithm of relay selection based-on position, speed and direction of movement to select intermediate vehicle stations (VS) with high contribution according to the transmission direction. Furthermore, in order to reduce interference and collision, we install a new timer to select a master relay vehicle station (MVS) which manages a packet transmission of whole network to trigger and synchronize transmitting timing of relay VSs (RVSs) in each hop. From the results of simulations, we can confirm that the proposed method can achieve reducing the redundant broadcast safety-related messages with keeping the packet loss probability by limiting the retransmission at each VS.

A multi-channel cognitive radio is a powerful solution for recovering the exhaustion of frequency spectrum resources. In a cognitive radio, although master and slave terminals (which construct a communication link) have the freedom to access arbitrary channels, access channel mismatch is caused. A rendezvous scheme based on frequency hopping can compensate for this mismatch by exchanging control signals through a selected channel in accordance with a certain rule. However, conventional frequency hopping schemes do not consider an access protocol of both control signals in the rendezvous scheme and the signal caused by channel access from other systems. Further, they do not consider an information sharing method to reach a consensus between the master and slave terminals. This paper proposes a modified rendezvous scheme based on learning-based channel occupancy rate (COR) estimation and describes a specific channel-access rule in the slave terminal. On the basis of this rule, the master estimates a channel selected by the slave by considering the average COR of the other systems. Since the master can narrow down the number of channels, a fast rendezvous scheme with a few control signals is established.

Spectrum databases are required to assist the process of radio propagation estimation for spectrum sharing. Especially, a measurement-based spectrum database achieves highly efficient spectrum sharing by storing the observed radio environment information such as the signal power transmitted from a primary user. However, when the average received signal power is calculated in a given square mesh, the bias of the observation locations within the mesh strongly degrades the accuracy of the statistics because of the influence of terrain and buildings. This paper proposes a method for determining the statistics by using mesh clustering. The proposed method clusters the feature vectors of the measured data by using the k-means and Gaussian mixture model methods. Simulation results show that the proposed method can decrease the error between the measured value and the statistically processed value even if only a small amount of data is available in the spectrum database.

In this paper, we propose a novel primary user detection scheme for spectrum sensing in cognitive radio. Inspired by the conventional signal classification approach, the spectrum sensing is translated into a classification problem. On the basis of feature-based classification, the spectral correlation of a second-order cyclostationary analysis is applied as the feature extraction method, whereas a stacked denoising autoencoders network is applied as the classifier. Two training methods for signal detection, interception-based detection and simulation-based detection, are considered, for different prior information and implementation conditions. In an interception-based detection method, inspired by the two-step sensing, we obtain training data from the interception of actual signals after a sophisticated sensing procedure, to achieve detection without priori information. In addition, benefiting from practical training data, this interception-based detection is superior under actual transmission environment conditions. The alternative, a simulation-based detection method utilizes some undisguised parameters of the primary user in the spectrum of interest. Owing to the diversified predetermined training data, simulation-based detection exhibits transcendental robustness against harsh noise environments, although it demands a more complicated classifier network structure. Additionally, for the above-described training methods, we discuss the classifier complexity over implementation conditions and the trade-off between robustness and detection performance. The simulation results show the advantages of the proposed method over conventional spectrum-sensing schemes.

Wireless ad hoc communications such as ad hoc networks have been attracting researchers' attention. They are expected to become a key technology for "ubiquitous" networking because of the ability to configure wireless links by nodes autonomously, without any centralized control facilities. Adaptive array antennas (AAA) have been expected to improve the network efficiency by taking advantage of its adaptive beamforming capability. However, it should be noted that AAA is not almighty. Its interference cancellation capability is limited by the degree-of-freedom (DOF) and the angular resolution as a function of the number of element antennas. Application of AAA without attending to these problems can degrade the efficiency of the network. Let us consider wireless ad hoc communication as a target application for AAA, taking advantage of AAA's interference cancellation capability. The low DOF and insufficient resolution will be crucial problems compared to other wireless systems, since there is no centralized facility to control the nodes to avoid interferences in such systems. A number of interferences might impinge on a node from any direction of arrival (DOA) without any timing control. In this paper, focusing on such limitations of AAA applied in ad hoc communications, we propose a new scheme, Forward Interference Avoidance (FIA), using AAA for ad hoc communications in order to avoid problems caused by the limitation of the AAA capability. It enables nodes to avoid interfering with other nodes so that it increases the number of co-existent wireless links. The performance improvement of ad hoc communications in terms of the number of co-existent links is investigated through computer simulations.

As the role of wireless communication is becoming more important for realizing a future connected society for not only humans but also things, spectrum scarcity is becoming severe, because of the huge numbers of mobile terminals and many types of applications in use. In order to realize sustainable wireless connection under limited spectrum resources in a future wireless world, a new dynamic spectrum management scheme should be developed that considers the surrounding radio environment and user preferences. In this paper, we discuss a new spectrum utilization framework for a future wireless world called the “smart spectrum.” There are four main issues related to realizing the smart spectrum. First, in order to recognize the spectrum environment accurately, spectrum measurement is an important technology. Second, spectrum modeling for estimating the spectrum usage and the spectrum environment by using measurement results is required for designing wireless parameters for dynamic spectrum use in a shared spectrum environment. Third, in order to effectively gather the measurement results and provide the spectrum information to users, a measurement-based spectrum database can be used. Finally, smart spectrum management that operates in combination with a spectrum database is required for realizing efficient and organized dynamic spectrum utilization. In this paper, we discuss the concept of the smart spectrum, fundamental research studies of the smart spectrum, and the direction of development of the smart spectrum for targeting the future wireless world.

In this paper, we present a modified image rejection method that uses imbalance compensation techniques for phase and gain in low-intermediate frequency (IF) software-defined radio (SDR) receivers. In low-IF receivers, the image frequency signal interferes with the desired signal owing to the phase and gain imbalances caused by analog devices. Thus, it is difficult to achieve the required image rejection ratio (IRR) of over 60dB without compensation. To solve this problem, we present modified blind compensation techniques based on digital signal processing using a feedback control loop with a practical computation process. The modified method can reduce the complexity when a hardware logic circuit is used, like an FPGA. The simulation and experimental results verify that the modified method achieves an IRR greater than 50-60dB for both the carrier and the modulated waves.

M-ary/SS is a version of Direct Sequence/Spread Spectrum (DS/SS) aiming to improve the spectral efficiency employing orthogonal codes. However, due to the auto-correlation property of the orthogonal codes, it is impossible to detect the symbol timing by observing correlator outputs. Therefore, conventionally, a preamble has been inserted in M-ary/SS signals. In this paper, we propose a new blind adaptive array antenna for M-ary/SS systems that combines signals over the space axis without any preambles. It is surely an innovative approach for M-ary/SS. The performance is investigated through computer simulations.

OFDM modulation has attracted attention for fourth-generation mobile communication systems and high-speed wireless LANs. However, it has a very serious problem of large peak power. PTS (partial transmit sequences) has been proposed as one solution to this problem. In PTS, the OFDM subcarriers are divided into several clusters, and the phase of each cluster is rotated by a complex weight to minimize the PAPR (peak-to-average power ratio). However, the weight of the phase rotation must be sent to the mobile terminal by using a side information channel. In this paper, we propose two weight estimation methods at the receiver to avoid weight transmission in side information channels. The first method uses pilot signals, while the second is a blind estimation method that changes the weight pattern. We evaluate the performance of these methods by computer simulation.

Post-FFT type orthogonal frequency division multiplexing (OFDM) adaptive array antennas can reduce the co-channel interference with a few antenna elements under multi-path fading environments. However, the Post-FFT type OFDM adaptive array antennas require a lot of pilot symbols in order to determine the optimal weights in each subcarrier. In packet communication systems, since the data are transmitted burst by burst, the ratio of the effective data in a channel decreases when the long pilot symbols are used. Recursive least squares (RLS) algorithm is one of the weight optimization algorithm with fast convergence based on minimum mean square errors (MMSE). However, the optimal weight determination with a few pilot symbols is difficult. Therefore, in this paper, we propose a novel multi-stage RLS OFDM adaptive array antenna for realizing weight determination with a few pilot symbols. In the proposed method, the weights are optimized by using a multiple stage structure with the stored pilot symbols. Here, the initial weights and the initial inverse matrix of correlation matrix are decided by the results of the weight determination in the adjacent subcarriers of the previous stage. As a result, the weight determination with a few pilot symbols can be achieved.

With the rapid developments in the Internet of Things (IoT), low power wide area networks (LPWAN) framework, which is a low-power, long-distance communication method, is attracting attention. However, in LPWAN, the access time is limited by Duty Cycle (DC) to avoid mutual interference. Packet-level index modulation (PLIM) is a modulation scheme that uses a combination of the transmission time and frequency channel of a packet as an index, enabling throughput expansion even under DC constraints. The indexes used in PLIM are transmitted according to the mapping. However, when many sensors access the same index, packet collisions occur owing to selecting the same index. Therefore, we propose a mapping design for PLIM using mathematical optimization. The mapping was designed and modeled as a quadratic integer programming problem. The results of the computer simulation evaluations were used to realize the design of PLIM, which achieved excellent sensor information aggregation in terms of environmental monitoring accuracy.

In this paper, we propose a combination system of point to multipoint (P-MP) time division multiple access (TDMA) broadband wireless access (BWA) system and indoor wireless local area network (WLAN). In order to realize a high speed wireless communication, a wide bandwidth is required for both access lines and local area networks. The proposed system shares the frequency between BWA and WLAN to achieve an efficient use of frequency resources. This is based on the idea that an uplink band of the P-MP TDMA BWA system will provide relatively small interference slots, which are not used by subscriber stations nearby. In other words, there are useful small interference slots for another system using same frequency according to its position. Then we use such small interference slots for WLAN. In addition, direct sequence code division multiple access (DS-CDMA) can suppress such TDMA interference by spreading it over wide bandwidth. Therefore in the proposed system, DS-CDMA is used for WLAN in the same band with the BWA uplink. We also discuss WLAN packet error rate reduction techniques for this system. To confirm the availability of the proposed system, we evaluate the system performance by numerical analysis and computer simulation.

In this paper, we focus on an OFDM peak power reduction method that uses clipping and filtering. This method can reduce the peak power of OFDM via clipping, and can also reduce the out-band emission via filtering, even if a nonlinear amplifier is used. However, the filtering causes peak power regeneration. For purposes of reducing the effect of peak power regeneration, we propose an adaptive clipping level control method for OFDM peak power reduction, as part of a technique using clipping and filtering. In this method, the clipping level is optimized by checking the peak power regrowth which is caused by inserting a filter, by using a multi-stage filtering simulator. Thus the peak power is adjusted to the target PAPR. If the target PAPR is decided to be the saturation power of an amplifier, the bit error rate performance is improved without increasing the out-band emission. In order to confirm the effectiveness of the proposed system, we evaluate its performance by using computer simulation.

Millimeter wave provides high data rates for Vehicle-to-Everything (V2X) communications. This paper motivates millimeter wave to support automated driving and begins by explaining V2X use cases that support automated driving with references to several standardization bodies. The paper gives a classification of existing V2X standards: IEEE802.11p and LTE V2X, along with the status of their commercial deployment. Then, the paper provides a detailed assessment on how millimeter wave V2X enables the use case of cooperative perception. The explanations provide detailed rate calculations for this use case and show that millimeter wave is the only technology able to achieve the requirements. Furthermore, specific challenges related to millimeter wave for V2X are described, including coverage enhancement and beam alignment. The paper concludes with some results from three studies, i.e. IEEE802.11ad (WiGig) based V2X, extension of 5G NR (New Radio) toward mmWave V2X, and prototypes of intelligent street with mmWave V2X.

This paper proposes a measurement-based spectrum database (MSD) with clustered fading distributions toward greater storage efficiencies. The conventional MSD can accurately model the actual characteristics of multipath fading by plotting the histogram of instantaneous measurement data for each space-separated mesh and utilizing it in communication designs. However, if the database contains all of a distribution for each location, the amount of data stored will be extremely large. Because the main purpose of the MSD is to improve spectral efficiency, it is necessary to reduce the amount of data stored while maintaining quality. The proposed method reduces the amount of stored data by estimating the distribution of the instantaneous received signal power at each point and integrating similar distributions through clustering. Numerical results show that clustering techniques can reduce the amount of data while maintaining the accuracy of the MSD. We then apply the proposed method to the outage probability prediction for the instantaneous received signal power. It is revealed that the prediction accuracy is maintained even when the amount of data is reduced.