Given an odd prime q and an integer m ≤ q, a binary mq × q2 quasi-cyclic parity-check matrix H(m, q) can be constructed for an array low-density parity-check (LDPC) code C (m, q). In this letter, we investigate the first separating redundancy of C (m, q). We prove that H (m, q) is 1-separating for any pair of (m, q), from which we conclude that the first separating redundancy of C (m, q) is upper bounded by mq. Then we show that our upper bound on the first separating redundancy of C (m, q) is tighter than the general deterministic and constructive upper bounds in the literature. For m=2, we further prove that the first separating redundancy of C (2, q) is 2q for any odd prime q. For m ≥ 3, we conjecture that the first separating redundancy of C (m, q) is mq for any fixed m and sufficiently large q.

In this letter, a novel projection algorithm is proposed in which projection onto a triangle consisting of the three even-vertices closest to the vector to be projected replaces check polytope projection, achieving the same FER performance as exact projection algorithm in both high-iteration and low-iteration regime. Simulation results show that compared with the sparse affine projection algorithm (SAPA), it can improve the FER performance by 0.2 dB as well as save average number of iterations by 4.3%.

In this letter, we investigate the application of the subgradient method to design efficient algorithm for linear programming (LP) decoding of binary linear codes. A major drawback of the original formulation of LP decoding is that the description complexity of the feasible region is exponential in the check node degrees of the code. In order to tackle the problem, we propose a processing technique for LP decoding with the subgradient method, whose complexity is linear in the check node degrees. Consequently, a message-passing type decoding algorithm can be obtained, whose per-iteration complexity is extremely low. Moreover, if the algorithm converges to a valid codeword, it is guaranteed to be a maximum likelihood codeword. Simulation results on several binary linear codes with short lengths suggest that the performances of LP decoding based on the subgradient method and the state-of-art LP decoding implementation approach are comparable.

The rapid advancement of cloud-edge-end collaboration offers a feasible solution to realize low-delay and low-energy-consumption data processing for internet of things (IoT)-based smart distribution grid. The major concern of cloud-edge-end collaboration lies on resource management. However, the joint optimization of heterogeneous resources involves multiple timescales, and the optimization decisions of different timescales are intertwined. In addition, burst electromagnetic interference will affect the channel environment of the distribution grid, leading to inaccuracies in optimization decisions, which can result in negative influences such as slow convergence and strong fluctuations. Hence, we propose a cloud-edge-end collaborative multi-timescale multi-service resource management algorithm. Large-timescale device scheduling is optimized by sliding window pricing matching, which enables accurate matching estimation and effective conflict elimination. Small-timescale compression level selection and power control are jointly optimized by disturbance-robust upper confidence bound (UCB), which perceives the presence of electromagnetic interference and adjusts exploration tendency for convergence improvement. Simulation outcomes illustrate the excellent performance of the proposed algorithm.

Automated tongue segmentation plays a crucial role in the realm of computer-aided tongue diagnosis. The challenge lies in developing algorithms that achieve higher segmentation accuracy and maintain less memory space and swift inference capabilities. To relieve this issue, we propose a novel Pool-unet integrating Pool-former and Multi-task mask learning for tongue image segmentation. First of all, we collected 756 tongue images taken in various shooting environments and from different angles and accurately labeled the tongue under the guidance of a medical professional. Second, we propose the Pool-unet model, combining a hierarchical Pool-former module and a U-shaped symmetric encoder-decoder with skip-connections, which utilizes a patch expanding layer for up-sampling and a patch embedding layer for down-sampling to maintain spatial resolution, to effectively capture global and local information using fewer parameters and faster inference. Finally, a Multi-task mask learning strategy is designed, which improves the generalization and anti-interference ability of the model through the Multi-task pre-training and self-supervised fine-tuning stages. Experimental results on the tongue dataset show that compared to the state-of-the-art method (OET-NET), our method has 25% fewer model parameters, achieves 22% faster inference times, and exhibits 0.91% and 0.55% improvements in Mean Intersection Over Union (MIOU), and Mean Pixel Accuracy (MPA), respectively.

As one of electrical components in transmission lines, vibration damper plays a role in preventing the power lines dancing, and its recognition is an important task for intelligent inspection. However, due to the complex background interference in aerial images, current deep learning algorithms for vibration damper detection often lack accuracy and robustness. To achieve vibration damper detection more accurately, in this study, improved You Only Look Once (YOLO) model is proposed for performing damper detection. Firstly, a damper dataset containing 1900 samples with different scenarios was created. Secondly, the backbone network of YOLOv4 was improved by combining the Res2Net module and Dense blocks, reducing computational consumption and improving training speed. Then, an improved path aggregation network (PANet) structure was introduced in YOLOv4, combined with top-down and bottom-up feature fusion strategies to achieve feature enhancement. Finally, the proposed YOLO model and comparative model were trained and tested on the damper dataset. The experimental results and analysis indicate that the proposed model is more effective and robust than the comparative models. More importantly, the average precision (AP) of this model can reach 98.8%, which is 6.2% higher than that of original YOLOv4 model; and the prediction speed of this model is 62 frames per second (FPS), which is 5 FPS faster than that of YOLOv4 model.

The distribution station serves as a foundational component for managing the power system. However, there are missing data in the areas without collection devices due to the limitation of device deployment, leading to an adverse impact on the real-time and precise monitoring of distribution stations. The problem of missing data can be solved by the pseudo measurement data deduction method. Traditional pseudo measurement data deduction methods overlook the temporal and contextual correlations of distribution station data, resulting in a lower restoration accuracy. Motivated by the above challenges, this paper proposes a novel pseudo measurement data deduction model for minimal data collection requirements in distribution stations. Compared to the traditional GAN, the proposed enhanced GAN improves the architecture by decomposing the input tensor of the generator, allowing it to handle high-dimensional and intricate data. Furthermore, we enhance the loss function to accelerate the model’s convergence speed. Our proposed approach allows GAN to be trained within a supervised environment, effectively enhancing the accuracy of model training. The simulation result shows that the proposed algorithm achieves better performances compared with existing methods.

In this letter, we investigate the separating redundancy of binary linear codes. Using analytical techniques, we provide a general lower bound on the first separating redundancy of binary linear codes and show the bound is tight for a particular family of binary linear codes, i.e., cycle codes. In other words, the first separating redundancy of cycle codes can be determined. We also derive a deterministic and constructive upper bound on the second separating redundancy of cycle codes, which is shown to be better than the general deterministic and constructive upper bounds for the codes.

In this letter, we consider the incorrigible sets of binary linear codes. First, we show that the incorrigible set enumerator of a binary linear code is tantamount to the Tutte polynomial of the vector matroid induced by the parity-check matrix of the code. A direct consequence is that determining the incorrigible set enumerator of binary linear codes is #P-hard. Then for a cycle code, we express its incorrigible set enumerator via the Tutte polynomial of the graph describing the code. Furthermore, we provide the explicit formula of incorrigible set enumerators of cycle codes constructed from complete graphs.

The separating redundancy is an important property in the analysis of the error-and-erasure decoding of a linear block code. In this work, we investigate the separating redundancy of the duals of first-order generalized Reed-Muller (GRM) codes, a class of nonbinary linear block codes that have nice algebraic properties. The dual of a first-order GRM code can be specified by two positive integers m and q and denoted by R(m,q), where q is the power of a prime number and q≠2. We determine the first separating redundancy value of R(m,q) for any m and q. We also determine the second separating redundancy values of R(m,q) for any q and m=1 and 2. For m≥3, we set up a binary integer linear programming problem, the optimum of which gives a lower bound on the second separating redundancy of R(m,q).

We implemented a scalar multiplication method over elliptic curves using division polynomials. We adapt an algorithm for computing elliptic nets proposed by Stange. According to our experimental results, the scalar multiplication method using division polynomials is faster than the binary method in an affine coordinate system.

Recent studies on switching fabrics mainly focus on the switching schedule algorithms, which aim at improving the throughput (a key performance metric). However, the delay (another key performance metric) of switching fabrics cannot be well guaranteed. A good switching fabric should be endowed with the properties of high throughput, delay guarantee, low component complexity and high-speed multicast, which are difficult for conventional switching fabrics to achieve. This has fueled great interest in designing a new switching fabric that can support large-scale extension and high-speed multicast. Motivated by this, we reuse the self-routing Boolean concentrator network and embed a model of multicast packet copy separation in front to construct a load-balanced multicast switching fabric (LB-MSF) with delay guarantee. The first phase of LB-MSF is responsible for balancing the incoming traffic into uniform cells while the second phase is in charge of self-routing the cells to their final destinations. In order to improve the throughput, LB-MSF is combined with the merits of erasure codes against packet loss. Experiments and analyses verify that the proposed fabric is able to achieve high-speed multicast switching and suitable for building super large-scale switching fabric in Next Generation Network(NGN) with all the advantages mentioned above. Furthermore, a prototype of the proposed switch is developed on FPGA, and presents excellent performance.

Volleyball video analysis plays important roles in providing data for TV contents and developing strategies. Among all the topics of volleyball analysis, qualitative player action recognition is essential because it potentially provides not only the action that being performed but also the quality, which means how well the action is performed. However, most action recognition researches focus on the discrimination between different actions. The quality of an action, which is helpful for evaluation and training of the player skill, has only received little attention so far. The vital problems in qualitative action recognition include occlusion, small inter-class difference and various kinds of appearance caused by the player change. This paper proposes a 3D global and multi-view local features combination based recognition framework with global team formation feature, ball state feature and abrupt pose features. The above problems are solved by the combination of 3D global features (which hide the unstable and incomplete 2D motion feature caused by occlusion) and the multi-view local features (which get detailed local motion features of body parts in multiple viewpoints). Firstly, the team formation extracts the 3D trajectories from the whole team members rather than a single target player. This proposal focuses more on the entire feature while eliminating the personal effect. Secondly, the ball motion state feature extracts features from the 3D ball trajectory. The ball motion is not affected by the personal appearance, so this proposal ignores the influence of the players appearance and makes it more robust to target player change. At last, the abrupt pose feature consists of two parts: the abrupt hit frame pose (which extracts the contour shape of the player's pose at the hit time) and abrupt pose variation (which extracts the pose variation between the preparation pose and ending pose during the action). These two features make difference of each action quality more distinguishable by focusing on the motion standard and stability between different quality actions. Experiments are conducted on game videos from the Semifinal and Final Game of 2014 Japan Inter High School Games of Men's Volleyball in Tokyo Metropolitan Gymnasium. The experimental results show the accuracy achieves 97.26%, improving 11.33% for action discrimination and 91.76%, and improving 13.72% for action quality evaluation.

The separating redundancy is an important concept in the analysis of the error-and-erasure decoding of a linear block code using a parity-check matrix of the code. In this letter, we derive new constructive upper bounds on the second separating redundancies of low-density parity-check (LDPC) codes constructed from projective and Euclidean planes over the field Fq with q even.

Given an odd prime q and an integer m ≤ q, an array-based parity-check matrix H(m,q) can be constructed for a quasi-cyclic low-density parity-check (LDPC) code C(m,q). For m=4 and q ≥ 11, we prove the stopping distance of H(4,q) is 10, which is equal to the minimum Hamming distance of the associated code C(4,q). In addition, a tighter lower bound on the stopping distance of H(m,q) is also given for m > 4 and q ≥ 11.

Recently, broadcast services are introduced in cellular networks and macro diversity is an effective way to combat fading. In this paper, we propose a kind of distributed space-time block codes (STBCs) for macro diversity which is constructed from the total antennas of multiple cooperating base stations, and all the antennas form an equivalent multiple input multiple output (MIMO) system. This code is termed High-Dimension-Full-Rate-Quasi-Orthogonal STBC (HDFR-QOSTBC) which can be characterized as: (1) It can be applied with any number of transmit antennas especially when the number of transmit antennas is large; (2) The code is with full transmit rate of one; (3) The Maximum Likelihood (ML) decoding complexity of this code is controllable and limited to Nt/2-symbol-decodable for total Nt transmit antennas. Then, we completely analyze the structure of the equivalent channel for the kind of codes and reveal a property that the eigenvectors of the equivalent channel are constant and independent from the channel realization, and this characteristic can be exploited for a new transmission structure with single-symbol linear decoder. Furthermore, we analyze different macro diversity schemes and give a performance comparison. The simulation results show that the proposed scheme is practical for the broadcast systems with significant performance improvement comparing with soft-combination and cyclic delay diversity (CDD) methods.

Amidst conflicting views about whether soft cooperative energy detection scheme (SCEDS) outperforms hard cooperative energy detection scheme (HCEDS) greatly in cognitive radio, we establish the bridge that mathematically connects SCEDS and HCEDS by closed approximations. Through this bridge, it is demonstrate that, if the number of detectors of HCEDS is 1.6 times as that of SCEDS, they have nearly the same performance which is confirmed by numerical simulations, enabling a quantitative evaluation of the relation between them and a resolution of the conflicting views.

For an odd prime q and an integer m≤q, we can construct a regular quasi-cyclic parity-check matrix HI(m,q) that specifies a linear block code CI(m,q), called an improper array code. In this letter, we prove the minimum distance of CI(4,q) is equal to 10 for any q≥11. In addition, we prove the minimum distance of CI(5,q) is upper bounded by 12 for any q≥11 and conjecture the upper bound is tight.

End-to-end (E2E) multilingual automatic speech recognition (ASR) systems aim to recognize multilingual speeches in a unified framework. In the current E2E multilingual ASR framework, the output prediction for a specific language lacks constraints on the output scope of modeling units. In this paper, a language supervision training strategy is proposed with language masks to constrain the neural network output distribution. To simulate the multilingual ASR scenario with unknown language identity information, a language identification (LID) classifier is applied to estimate the language masks. On four Babel corpora, the proposed E2E multilingual ASR system achieved an average absolute word error rate (WER) reduction of 2.6% compared with the multilingual baseline system.

In view of the different spatial and temporal resolutions of observed multi-source heterogeneous carbon dioxide data and the uncertain quality of observations, a data fusion prediction model for observed multi-scale carbon dioxide concentration data is studied. First, a wireless carbon sensor network is created, the gross error data in the original dataset are eliminated, and remaining valid data are combined with kriging method to generate a series of continuous surfaces for expressing specific features and providing unified spatio-temporally normalized data for subsequent prediction models. Then, the long short-term memory network is used to process these continuous time- and space-normalized data to obtain the carbon dioxide concentration prediction model at any scales. Finally, the experimental results illustrate that the proposed method with spatio-temporal features is more accurate than the single sensor monitoring method without spatio-temporal features.