The characteristics of transient electromagnetic responses between two dipole antennas are investigated theoretically and experimentally for the case where one dipole antenna is located above an interface of a lossy ground half-space and another is buried underground. First, an asymptotic expression for the refracted electric fields is derived based on the saddle point method when a horizontal dipole is buried in the lossy half-space. A suitable saddle point which differs from the conventional one is selected for evaluation when the observation point is located far enough away from the buried antenna. The resultant formula indicates that the refracted electric fields can be interpreted by the sum of two waves. When the observation point is very close to the interface, one of which is a direct wave which propagates from the buried antenna toward the interface point just beneath the observation point and the other a lateral wave which propagates from the buried antenna to the interface with an angle of total reflection and then propagates along the interface. Next, the transient reception voltages of the antenna over the ground surface are measured. It is shown that the experimental results agree very well with the theoretical results, confirming the validity of the theory.

Gas or water leaks in pipes that are buried under ground or that are situated in the walls of buildings may occur due to aging or unpredictable accidents, such as earthquakes. Therefore, the detection of leaks in pipes is an important task and has been investigated extensively. In the present paper, we propose a novel leak detection method by means of acoustic wave. We inject an acoustic chirp signal into a target pipeline and then estimate the leak location from the delay time of the compressed pulse by passing the reflected signal through a correlator. In order to distinguish a leak reflection in a complicated pipeline arrangement, the reflection characteristics of leaks are carefully discussed by numerical simulations and experiments. There is a remarkable difference in the reflection characteristics between the leak and other types of discontinuity, and the property can be utilized to distinguish the leak reflection. The experimental results show that, even in a complicated pipe arrangement including bends and branches, the proposed approach can successfully implement the leak detection. Furthermore, the proposed approach has low cost and is easy to implement because only a personal computer and some commonly equipment are required.

A two-dimensional quasi-exact active imaging method for detecting the conducting objects buried in a dielectric half-space is proposed. In this imaging method, an image function which is a projection of buried object to an arbitrary direction, is introduced exactly by taking account of the presence of the planar boundary. The image function is synthesized from the scattering fields which are measured by moving a transmitting antenna (a current source) and a receiving antenna (an observation point) simultaneously along the ground surface. The scattering field is generated by the physical optics current assumed on the surface of buried object. Because the effectiveness of physical optics approximation has been confirmed for this problem, this is a quasi-exact active imaging method. The validity of this imaging method is confirmed by some numerical simulations and an experiment.

The present paper deals with the frequency-dependent finite difference time domain ((FD)2TD) method analysis of the light-beam scattering from a land/groove recording magneto-optical (MO) disk model with an Al reflective layer (ALRL) in order to improve the conventional analysis for MO disk models under the assumption of perfectly conducting reflective layer (PCRL). Numerical examples of main- and cross-polarized scattered fields and the phase difference between them are presented. We show the comparison of the scattering characteristics between ALRL and PCRL, and also examine the dependence of the cross talk of the readout signal due to adjacent recorded marks on both the recorded mark size and the depth of grooves.

The antennas for subsurface radar are usually covered with a conducting cavity to prevent the radiation field from affecting the electromagnetic environment and to protect the received field from external noises. Furthermore, radiowave absorber is attached to the interior wall of the cavity in order to suppress the multiple reflections in the cavity. In this paper, the characteristics of the two-dimensional cavity-backed antenna having the absorber and the over-all properties of this subsurface radar due to buried objects are numerically analyzed by the Finite-Difference Time-Domain method. It is shown that the pulse propagation in the ground is confined to the narrow region due to the cavity. It is also shown that the multiple reflections in the cavity are effectively suppressed by choosing the suitable absorber, and so that the distinctive pulse echo can be obtained.

Various kinds of optical near-field apertures have been proposed for higher throughput and smaller spot size. However, few studies have mentioned the readout characteristics of the recorded marks on an optical disk illuminated by a near field optical light. In this paper, we have investigated the scattering light by a two-dimensional recorded mark on a phase change disk with Finite-Difference Time-Domain (FDTD) simulations. Instead of using Recursive Convolution (RC) and Piecewise Linear Recursive Convolution (PLRC) scheme, we integrated the motion equation of free electron into conventional FDTD method to solve the electromagnetic field in the metallic materials. The validity of the proposed method is illustrated by comparing its results with those from the analytic exact solution. We analyzed the distributions of optical near-field around a two-dimensional metallic nano-aperture, and then calculated the far-field scattering pattern from a two-dimensional recorded mark on a phase change disk while it was illuminated by an optical near-field though a nanoaperture. The sum signal by a condenser lens was calculated from far-field pattern, and its relationships with the width of recorded mark and the thickness of each layer in the phase change disk were illustrated. The cross-talk between the recorded marks was also discussed.

This paper implements some new techniques to analyze the light beam scattering from a magneto-optical (MO) disk using the three-dimensional finite-difference time-domain (FDTD) method. The anisotropic FDTD update equations are implemented to calculate the propagation of a coherent monochromatic light in the MO material. An anisotropic absorbing boundary condition based on Berenger's perfectly matched layer (PML) concept is also developed. The Gaussian incident light beam is introduced into FDTD computation region exactly by using equivalent electric and magnetic currents. The scattering pattern of light beam from the MO disk is computed and in part compared with that obtained by using the boundary element method. The scattering patterns by the circular recording bit of different radius are calculated to indicate the optimum radius of the recording bit.

The present paper describes the finite difference time domain (FDTD) analysis of the light-beam diffraction from two- and three-dimensional (2-D and 3-D) magneto-optical (MO) disk structures. First, we show that the proposed new FDTD formulation is valid for MO disk medium and can avoid the divergence of fields encountered during the conventional FDTD calculations. Second, as the application of the present method to more complicated models, the main- and cross-polarized diffracted fields are numerically calculated for 2-D and 3-D four-layered MO disk models. The phase differences between two kinds of polarized components are shown. The results obtained here indicate that the proposed FDTD formulation can be applied to more complicated MO disk structures.