In this paper, we develop a novel two-sample test statistic for edge detection in CT image. This test statistic involves the non-parametric estimate of the samples' probability density functions (PDF's) based on the kernel density estimator and the calculation of the mean square error (MSE) distance of the estimated PDF's. In order to extract single-pixel-wide edges, a generic detection scheme cooperated with the non-maximum suppression is also proposed. This new method is applied to a variety of noisy images, and the performance is quantitatively evaluated with edge strength images. The experiments show that the proposed method provides a more effective and robust way of detecting edges in CT image compared with other existing methods.

Crohn's disease commonly affects the small and large intestines. Its symptoms include ulcers and intestinal stenosis, and its diagnosis is currently performed using an endoscope. However, because the endoscope cannot pass through the stenosed parts of the intestines, diagnosis of the entire intestines is difficult. A CT image-based method is expected to become an alternative way for the diagnosis of Crohn's disease because it enables observation of the entire intestine even if stenosis exists. To achieve efficient CT image-based diagnosis, diagnostic-aid by computers is required. This paper presents an automated detection method of the surface of ulcers in the small and large intestines from fecal tagging CT images. Ulcers cause rough surfaces on the intestinal wall and consist of small convex and concave (CC) regions. We detect them by blob and inverse-blob structure enhancement filters. A roughness value is utilized to reduce the false positives of the detection results. Many CC regions are concentrated in ulcers. The roughness value evaluates the concentration ratio of the detected regions. Detected regions with low roughness values are removed by a thresholding process. The thickness of the intestinal lumen and the CT values of the surrounding tissue of the intestinal lumen are also used to reduce false positives. Experimental results using ten cases of CT images showed that our proposed method detects 70.6% of ulcers with 12.7 FPs/case. The proposed method detected most of the ulcers.

This paper presents an ensemble learning algorithm for liver tumour segmentation from a CT volume in the form of U-Boost and extends the loss functions to improve performance. Five segmentation algorithms trained by the ensemble learning algorithm with different loss functions are compared in terms of error rate and Jaccard Index between the extracted regions and true ones.

Our purpose in this study is to develop a scheme to segment the rectus abdominis muscle region in X-ray CT images. We propose a new muscle recognition method based on the shape model. In this method, three steps are included in the segmentation process. The first is to generate a shape model for representing the rectus abdominis muscle. The second is to recognize anatomical feature points corresponding to the origin and insertion of the muscle, and the third is to segment the rectus abdominis muscles using the shape model. We generated the shape model from 20 CT cases and tested the model to recognize the muscle in 10 other CT cases. The average value of the Jaccard similarity coefficient (JSC) between the manually and automatically segmented regions was 0.843. The results suggest the validity of the model-based segmentation for the rectus abdominis muscle.

In general, the spleen accompanied by abnormal abdomen is hypertrophied. However, if the spleen size is originally small, it is hard to detect the splenic enlargement due to abnormal abdomen by simply measure the size. On the contrary, the spleen size of a person having a normal abdomen may be large by nature. Therefore, measuring the size of spleen is not a reliable diagnostic measure of its enlargement or the abdomen abnormality. This paper proposes an automatic method to diagnose the splenic enlargement due to abnormality, by examining the boundary pattern of spleen in abdominal CT images.

This paper presents a new analysis result of two-dimensional four-phase abdominal CT images using variational Bayesian mixture of ICA. The four-phase CT images are assumed to be comprised of several exclusive areas, and each area is generated by a set of corresponding independent components. ICA mixture analysis results show that the CT images could be divided into a set of clinically and anatomically meaningful components. Initial analysis of the independent components shows its promising prospects in medical image processing and computer-aided diagnosis.

In this paper, we propose a fixed monocular camera, which changes the focus cyclically to recognize completely the three-dimensional translational motion of a rigid object. The images captured in a half cycle of the focus change form a multi-focus image sequence. The motion in depth or the focus change of the camera causes defocused blur. We develop an in-focus frame tracking operator in order to automatically detect the in-focus frame in a multi-focus image sequence of a moving object. The in-focus frame gives a 3D position in the motion of the object at the time that the frame was captured. The reconstruction of the motion of an object is performed by utilizing non-uniform sampling theory for the 3D position samples, of which information were inferred from the in-focus frames in the multi-focus image sequences.

This paper proposes the design of a physically accurate spine model and its application to estimate three dimensional spine posture from the frontal and lateral views of a human body taken by two conventional video cameras. The accurate spine model proposed here is composed of rigid body parts approximating vertebral bodies and elastic body parts representing intervertebral disks. In the estimation process, we obtain neck and waist positions by fitting the Connected Vertebra Spheres Model to frontal and lateral silhouette images. Then the virtual forces acting on the top and the bottom vertebrae of the accurate spine model are computed based on the obtained neck and waist positions. The accurate model is deformed by the virtual forces, the gravitational force, and the forces of repulsion. The model thus deformed is regarded as the current posture. According to the preliminary experiments based on one real MR image data set of only one subject person, we confirmed that our proposed deformation method estimates the positions of the vertebrae within positional shifts of 3.2 6.8 mm. 3D posture of the spine could be estimated reasonably by applying the estimation method to actual human images taken by video cameras.

Presented in this paper is a neural back propagation algorithm for reconstructing two-dimensional CT images from a small number of projection data. The paper extends the work in [1], in which a backpropagation algorithm is applied to the CT image reconstruction problem. The delta rule of the ordinary backpropagation algorithm is modified using a 'secondary' teaching signal and the 'Resilient backpropagation' scheme. Results obtained are presented along with those of two well known conventional methods: MART and EMML method. A quantitative evaluation reveals the effectiveness of the proposed algorithm.

Understanding unknown objects in images is one of the most important fields of the computer vision. We are confronted with the problem of dealing with the ambiguity of the image information about unknown objects in the scene. The purpose of this paper is to propose a new object recognition method based on the fuzzy relation system and the fuzzy integral. In order to deal with the ambiguity of the image information, we apply the fuzzy theory to object recognition subjects. Firstly, we define the degree of similarity based on the fuzzy relation system among input images and object models. In the next, to avoid the uncertainty of relations between the input image and the 2-D aspects of models, we integrate the degree of similarity obtained from several input images by the fuzzy integral. This proposing method makes it possible to recognize the unknown objects correctly under the ambiguity of the image information. And the validity of our method is confirmed by the experiments with six kinds of chairs.

A two-cascaded image processing approach to enhance the subtle differences in X-ray CT image is proposed. In the method, an asymmetrical non-linear subfilter is introduced to reduce the noise inherent in the image while preserving local edges and directional structural information. Then, a subfilter is used to compress the global dynamic range of the image and emphasize the details in the homogeneous regions by performing a modular transformation on local image den-sities. The modular transformation is based on a dynamically defined contrast fator and the histogram distributions of the image. The local contrast factor is described in accordance with Weber's fraction by a two-layer neighborhood system where the relative variances of the medians for eight directions are computed. This method is suitable for low contrast images with wide dynamic ranges. Experiments on X-ray CT images of the head show the validity of the method.