This paper first reviews the state-of-the-art noise reduction methods and points out their vulnerability in noise reduction performance and speech quality, especially under the low signal-noise ratios (SNR) environments. Then this paper presents an improved perceptual multiband spectral subtraction (MBSS) noise reduction algorithm (NRA) and a novel robust voice activity detection (VAD) based on the amended sub-band SNR. The proposed SNR-based VAD can considerably increase the accuracy of discrimination between noise and speech frame. The simulation results show that the proposed NRA has better segmental SNR (segSNR) and perceptual evaluation of speech quality (PESQ) performance than other noise reduction algorithms especially under low SNR environments. In addition, a fully operational digital hearing aid chip is designed and fabricated in the 0.13 µm CMOS process based on the proposed NRA. The final chip implementation shows that the whole chip dissipates 1.3 mA at the 1.2 V operation. The acoustic test result shows that the maximum output sound pressure level (OSPL) is 114.6 dB SPL, the equivalent input noise is 5.9 dB SPL, and the total harmonic distortion is 2.5%. So the proposed digital hearing aid chip is a promising candidate for high performance hearing-aid systems.

As a hot topic of speech signal processing, speech emotion recognition methods have been developed rapidly in recent years. Some satisfactory results have been achieved. However, it should be noted that most of these methods are trained and evaluated on the same corpus. In reality, the training data and testing data are often collected from different corpora, and the feature distributions of different datasets often follow different distributions. These discrepancies will greatly affect the recognition performance. To tackle this problem, a novel corpus-invariant discriminant feature representation algorithm, called transfer discriminant analysis (TDA), is presented for speech emotion recognition. The basic idea of TDA is to integrate the kernel LDA algorithm and the similarity measurement of distributions into one objective function. Experimental results under the cross-corpus conditions show that our proposed method can significantly improve the recognition rates.

The compressive sensing (CS) theory has been widely used in synthetic aperture radar (SAR) imaging for its ability to reconstruct image from an extremely small set of measurements than what is generally considered necessary. Because block-based CS approaches in SAR imaging always cause block boundaries between two adjacent blocks, resulting in namely the block artefacts. In this paper, we propose a weighted overlapped block-based compressive sensing (WOBCS) method to reduce the block artefacts and accomplish SAR imaging. It has two main characteristics: 1) the strategy of sensing small and recovering big and 2) adaptive weighting technique among overlapped blocks. This proposed method is implemented by the well-known CS recovery schemes like orthogonal matching pursuit (OMP) and BCS-SPL. Promising results are demonstrated through several experiments.

In this paper, we investigate a relationship between many-one-like autoreducibility and completeness for classes of functions computed by polynomial-time nondeterministic Turing transducers. We prove two results. One is that any many-one complete function for these classes is metric many-one autoreducible. The other is that any strict metric many-one complete function for these classes is strict metric many-one autoreducible.

As the number of electronic control units (ECUs) or sensors connected to a controller area network (CAN) bus increases, so does the bus load. When a CAN bus is overloaded by a large number of ECUs, both the waiting time and the error probability of the data transmission are increased. Because the duration of the data transmission is proportional to the frame length, it is desirable to reduce the CAN frame length. In this paper, we present an improved CAN data-reduction (DR) algorithm to reduce the amount of data to be transferred in the CAN frame length. We also implement the data reduction algorithm using the CANoe software, and measure the CAN bus load using a CANcaseXL device. Experimental results with a Kia Sorento vehicle indicate that we can obtain additional average compression ratio of 11.15% with the proposed method compared with the ECANDC algorithm. By using the CANoe software, we show that the average message delay is within 0.10ms and the bus load can be reduced by 23.45% with 20 ECUs using the proposed method compared with the uncompressed message.

This paper proposes novel simplified maximum likelihood detection for XOR physical layer network coding (XOR-PNC) in bi-directional wireless relay systems with Quaternary phase shift keying (QPSK). The proposed detection applies unitary precoding to achieve superior performance without computationally prohibitive exhaustive search. The performance of the XOR employing the proposed simplified MLD with the precoding is analyzed in relay systems with orthogonal frequency division multiplexing (OFDM). The performance of the XOR-PNC with the proposed techniques is also evaluated by computer simulation. The XOR-PNC with the proposed techniques achieves about 7dB better performance than the amplify-and-forward physical layer network coding in the 5-path fading channel at BER=10-4. It is also shown that the XOR-PNC with the proposed techniques achieves better performance than that without precoding.

Functional near-infrared spectroscopy (fNIRS) is a noninvasive neuroimaging technique, suitable for measurement during motor learning. However, effects of contamination by systemic artifacts derived from the scalp layer on learning-related fNIRS signals remain unclear. Here we used fNIRS to measure activity of sensorimotor regions while participants performed a visuomotor task. The comparison of results using a general linear model with and without systemic artifact removal shows that systemic artifact removal can improve detection of learning-related activity in sensorimotor regions, suggesting the importance of removal of systemic artifacts on learning-related cerebral activity.

An efficient balanced truncation for RC and RLC networks is presented in this paper. To accelerate the balanced truncation, sparse structures of original networks are considered. As a result, Lyapunov equations, the solutions of which are necessary for making the transformation matrices, are efficiently solved, and the reduced order models are efficiently obtained. It is proven that reciprocity of original networks is preserved while applying the proposed method. Passivity of the reduced RC networks is also guaranteed. In the illustrative examples, we will show that the proposed method is compatible with PRIMA in efficiency and is more accurate than PRIMA.

Power analysis for IoT devices is strongly required to protect attacks from malicious attackers. It is also very important to reduce power consumption itself of IoT devices. In this paper, we propose a highly-adaptable and small-sized in-field power analyzer for low-power IoT devices. The proposed power analyzer has the following advantages: (A) The proposed power analyzer realizes signal-averaging noise reduction with synchronization signal lines and thus it can reduce wide frequency range of noises; (B) The proposed power analyzer partitions a long-term power analysis process into several analysis segments and measures voltages and currents of each analysis segment by using small amount of data memories. By combining these analysis segments, we can obtain long-term analysis results; (C) The proposed power analyzer has two amplifiers that amplify current signals adaptively depending on their magnitude. Hence maximum readable current can be increased with keeping minimum readable current small enough. Since all of (A), (B) and (C) do not require complicated mechanisms nor circuits, the proposed power analyzer is implemented on just a 2.5cm×3.3cm board, which is the smallest size among the other existing power analyzers for IoT devices. We have measured power and energy consumption of the AES encryption process on the IoT device and demonstrated that the proposed power analyzer has only up to 1.17% measurement errors compared to a high-precision oscilloscope.

In statistical methods, such as statistical static timing analysis, Gaussian mixture model (GMM) is a useful tool for representing a non-Gaussian distribution and handling correlation easily. In order to repeat various statistical operations such as summation and maximum for GMMs efficiently, the number of components should be restricted around two. In this paper, we propose a method for reducing the number of components of a given GMM to two (2-GMM). Moreover, since the distribution of each component is represented often by a linear combination of some explanatory variables, we propose a method to compute the covariance between each explanatory variable and the obtained 2-GMM, that is, the sensitivity of 2-GMM to each explanatory variable. In order to evaluate the performance of the proposed methods, we show some experimental results. The proposed methods minimize the normalized integral square error of probability density function of 2-GMM by the sacrifice of the accuracy of sensitivities of 2-GMM.

This paper proposes an address power reduction method for plasma display panels (PDPs) using subfield data smoothing based on a visual masking effect. High-resolution, high-frame-rate PDPs have large address power loss caused by parasitic capacitance. Although the address power is reduced by smoothing the subfield data, noise is generated. The proposed method reduces the address power while maintaining the image quality by choosing the smoothing area of the address data based on the visual masking effect. The results of subjective assessment for the images based on smoothed address data indicate that image quality is maintained.

Antenna radiation patterns have side-lobes that add to ambiguity in the form of ghosting and object repetition in SAR images. An L-band 1.27GHz, 2×5 element proximity-coupled corner-truncated patch array antenna synthesized using the Dolph-Chebyshev method to reduce side-lobe levels is proposed. The designed antenna was sim-ulated, optimized, and fabricated for antenna performance parameter measurements. Antenna performance characteristics show good agree-ment with simulated results. A set of antennas were fabricated and then used together with a custom synthetic aperture radar system and SAR imaging performed on a point target in an anechoic chamber. Imaging results are also discussed in this paper showing improvement in image output. The antenna and its connected SAR systems developed in this work are different from most previous work in that this work is utilizing circular polarization as opposed to linear polarization.

In this paper, we propose an overloaded multiple-input multiple-output (MIMO) signal detection scheme with slab decoding and lattice reduction (LR). The proposed scheme firstly splits the transmitted signal vector into two parts, the post-voting vector composed of the same number of signal elements as that of receive antennas, and the pre-voting vector composed of the remaining elements. Secondly, it reduces the candidates of the pre-voting vector using slab decoding and determines the post-voting vectors for each pre-voting vector candidate by LR-aided minimum mean square error (MMSE)-successive interference cancellation (SIC) detection. From the performance analysis of the proposed scheme, we derive an upper bound of the error probability and show that it can achieve the full diversity order. Simulation results show that the proposed scheme can achieve almost the same performance as the optimal ML detection while reducing the required computational complexity.

Fine-grained visual categorization (FGVC) has drawn increasing attention as an emerging research field in recent years. In contrast to generic-domain visual recognition, FGVC is characterized by high intra-class and subtle inter-class variations. To distinguish conceptually and visually similar categories, highly discriminative visual features must be extracted. Moreover, FGVC has highly specialized and task-specific nature. It is not always easy to obtain a sufficiently large-scale training dataset. Therefore, the key to success in practical FGVC systems is to efficiently exploit discriminative features from a limited number of training examples. In this paper, we propose an efficient two-step dimensionality compression method to derive compact middle-level part-based features. To do this, we compare both space-first and feature-first convolution schemes and investigate their effectiveness. Our approach is based on simple linear algebra and analytic solutions, and is highly scalable compared with the current one-vs-one or one-vs-all approach, making it possible to quickly train middle-level features from a number of pairwise part regions. We experimentally show the effectiveness of our method using the standard Caltech-Birds and Stanford-Cars datasets.

Through-silicon vias (TSV) allow the stacking of dies into multilayer structures, and solve connection problems between neighboring tiers for three-dimensional (3D) integrated circuit (IC) technology. Several studies have investigated the placement and routing in 3D ICs, but not much has focused on circuit partitioning for 3D stacking. However, with the scaling trend of CMOS technology, the influence of the area of I/O pads, power/ground (P/G) pads, and TSVs should not be neglected in 3D partitioning technology. In this paper, we propose an iterative layer-aware partitioning algorithm called EX-iLap, which takes into account the area of I/O pads, P/G pads, and TSVs for area balancing and minimization of inter-tier interconnections in a 3D structure. Minimizing the quantity of TSVs reduces the total silicon die area, which is the main source of recurring costs during fabrication. Furthermore, estimations of the number of TSVs and the total area are somewhat imprecise if P/G TSVs are not taken into account. Therefore, we calculate the power consumption of each cell and estimate the number of P/G TSVs at each layer. Experimental results show that, after considering the power of interconnections and pads, our algorithm can reduce area-overhead by ~39% and area standard deviation by ~69%, while increasing the quantity of TSVs by only 12%, as compared to the algorithm without considering the power of interconnections and pads.

The high-availability seamless redundancy (HSR) protocol is a representative protocol that fulfills the reliability requirements of the IEC61850-based substation automation system (SAS). However, it has the drawback of creating unnecessary traffic in a network. To solve this problem, a dual virtual path (DVP) algorithm based on HSR was recently presented. Although this algorithm dramatically reduces network traffic, it does not consider the substation timing requirements of messages in an SAS. To reduce unnecessary network traffic in an HSR ring network, we introduced a novel packet transmission (NPT) algorithm in a previous work that considers IEC61850 message types. To further reduce unnecessary network traffic, we propose an extended dual virtual paths (EDVP) algorithm in this paper that considers the timing requirements of IEC61850 message types. We also include sending delay (SD), delay queue (DQ), and traffic flow latency (TFL) features in our proposal. The source node sends data frames without SDs on the primary paths, and it transmits the duplicate data frames with SDs on the secondary paths. Since the EDVP algorithm discards all of the delayed data frames in DQs when there is no link or node failure, unnecessary network traffic can be reduced. We demonstrate the principle of the EDVP algorithm and its performance in terms of network traffic compared to the standard HSR, NPT, and DVP algorithm using the OPNET network simulator. Throughout the simulation results, the EDVP algorithm shows better traffic performance than the other algorithms, while guaranteeing the timing requirements of IEC61850 message types. Most importantly, when the source node transmits heavy data traffic, the EDVP algorithm shows greater than 80% and 40% network traffic reduction compared to the HSR and DVP approaches, respectively.

Coordinate interleaved orthogonal design (CIOD) using four transmit antennas provides full diversity, full rate (FDFR) properties with low decoding complexity. However, the constellation expansion due to the coordinate interleaving of the rotated constellation results in peak to average power ratio (PAPR) increase. In this paper, we propose two signal constellation design methods which have low PAPR. In the first method we propose a signal constellation by properly selecting the signal points among the expanded square QAM constellation points, based on the co-prime interleaving of the first coordinate signal. We design a regular interleaving pattern so that the coordinate distance product (CPD) after the interleaving becomes large to get the additional coding gain. In the other method we propose a novel constellation with low PAPR based on the clipping of the rotated square QAM constellation. Our proposed signal constellations show much lower PAPR than the ordinary rotated QAM constellations for CIOD.

In this letter, we propose a lattice reduction (LR) aided joint precoding design for MIMO-relay broadcast communication with the average bit error rate (BER) criterion. We jointly design the signal process flow at both the base station (BS), and the relay station (RS), using the reduced basis of two-stage channel matrices. We further modify the basic precoding design with a novel shift method and a modulo method to improve the power efficiency at the BS and the RS respectively. In addition, the MMSE-SIC algorithm is employed to improve the performance of precoding. Simulations show that, the proposed schemes achieve higher diversity order than the traditional precoding without LR, and the modified schemes significantly outperform the basic design, proving the effectiveness of the proposed methods.

In this paper, we propose a workload assignment policy for reducing power consumption by air conditioners in data centers. In the proposed policy, to reduce the air conditioner power consumption by raising the temperature set points of the air conditioners, the temperatures of all server back-planes are equalized by moving workload from the servers with the highest temperatures to the servers with the lowest temperatures. To evaluate the proposed policy, we use a computational fluid dynamics simulator for obtaining airflow and air temperature in data centers, and an air conditioner model based on experimental results from actual data center. Through evaluation, we show that the air conditioners' power consumption is reduced by 10.4% in a conventional data center. In addition, in a tandem data center proposed in our research group, the air conditioners' power consumption is reduced by 53%, and the total power consumption of the whole data center is exhibited to be reduced by 23% by reusing the exhaust heat from the servers.

A multisignature (MS) scheme enables a group of signers to produce a compact signature on a common message. In analyzing security of MS schemes, a key registration protocol with proof-of-possession (POP) is considered to prevent rogue key attacks. In this paper, we refine the POP-based security model by formalizing a new strengthened POP model and showing relations between the previous POP models and the new one. We next suggest a MS scheme that achieves: (1) non-interactive signing process, (2) O(1) pairing computations in verification, (3) tight security reduction under the co-CDH assumption, and (4) security under the new strengthened POP model. Compared to the tightly-secure BNN-MS scheme, the verification in ours can be at least 7 times faster at the 80-bit security level and 10 times faster at the 128-bit security level. To achieve our goal, we introduce a novel and simple POP generation method that can be viewed as a one-time signature without random oracles. Our POP technique can also be applied to the LOSSW-MS scheme (without random oracles), giving the security in the strengthened POP model.