Convolutional Neural Networks (CNNs) have recently demonstrated outstanding performance in image retrieval tasks. Local convolutional features extracted by CNNs, in particular, show exceptional capability in discrimination. Recent research in this field has concentrated on pooling methods that incorporate local features into global features and assess the global similarity of two images. However, the pooling methods sacrifice the image's local region information and spatial relationships, which are precisely known as the keys to the robustness against occlusion and viewpoint changes. In this paper, instead of pooling methods, we propose an alternative method based on local similarity, determined by directly using local convolutional features. Specifically, we first define three forms of local similarity tensors (LSTs), which take into account information about local regions as well as spatial relationships between them. We then construct a similarity CNN model (SCNN) based on LSTs to assess the similarity between the query and gallery images. The ideal configuration of our method is sought through thorough experiments from three perspectives: local region size, local region content, and spatial relationships between local regions. The experimental results on a modified open dataset (where query images are limited to occluded ones) confirm that the proposed method outperforms the pooling methods because of robustness enhancement. Furthermore, testing on three public retrieval datasets shows that combining LSTs with conventional pooling methods achieves the best results.

This paper addresses pilot contamination in massive multiple-input multiple-output (MIMO) uplink. Pilot contamination is caused by reuse of identical pilot sequences in adjacent cells. To solve pilot contamination, the base station utilizes differences between the transmission frames of different users, which are detected via joint channel and data estimation. The joint estimation is regarded as a bilinear inference problem in compressed sensing. Expectation propagation (EP) is used to propose an iterative channel and data estimation algorithm. Initial channel estimates are attained via time-shifted pilots without exploiting information about large scale fading. The proposed EP modifies two points in conventional bilinear adaptive vector approximate message-passing (BAd-VAMP). One is that EP utilizes data estimates after soft decision in the channel estimation while BAd-VAMP uses them before soft decision. The other point is that EP can utilize the prior distribution of the channel matrix while BAd-VAMP cannot in principle. Numerical simulations show that EP converges much faster than BAd-VAMP in spatially correlated MIMO, in which approximate message-passing fails to converge toward the same fixed-point as EP and BAd-VAMP.

In a smart home environment, sensors generate events whenever activities of residents are captured. However, due to some factors, abnormal events could be generated, which are technically reasonable but contradict to real-world activities. To detect abnormal events, a number of methods has been introduced, e.g., clustering-based or snapshot-based approaches. However, they have limitations to deal with complicated anomalies which occur with large number of events and blended within normal sensor readings. In this paper, we propose a novel method of detecting sensor anomalies under smart home environment by considering spatial correlation and dependable correlation between sensors. Initially, we pre-calculate these correlations of every pair of two sensors to discover their relations. Then, from periodic sensor readings, if it has any unmatched relations to the pre-computed ones, an anomaly is detected on the correlated sensor. Through extensive evaluations with real datasets, we show that the proposed method outperforms previous approaches with 20% improvement on detection rate and reasonably low false positive rate.

This paper proposes a new and effective convolutional neural network model termed OFR-Net for optical flow refinement. The OFR-Net exploits the spatial correlation between images and optical flow fields. It adopts a pyramidal codec structure with residual connections, dense connections and skip connections within and between the encoder and decoder, to comprehensively fuse features of different scales, locally and globally. We also introduce a warp loss to restrict large displacement refinement errors. A series of experiments on the FlyingChairs and MPI Sintel datasets show that the OFR-Net can effectively refine the optical flow predicted by various methods.

This paper experimentally verifies the potential of higher order space division multiplexing in line-of-sight (LOS) channels for multiuser massive MIMO. We previously proposed an inter-user interference (IUI) cancellation scheme and a simplified user scheduling method for Massive Antenna Systems for Wireless Entrance (MAS-WE). In order to verify the effectiveness of the proposed techniques, channel state information (CSI) for a 1×32 SIMO channel is measured in a real propagation environment with simplified test equipment. Evaluations of the measured CSI data confirm the effectiveness of our proposals; they offer good equal gain transmission (EGT) performance, reduced spatial correlation with enlarged angular gap between users, and quite small channel state fluctuation. Link level simulations elucidate that the simple IUI cancellation method is stable in practical conditions. The degradation in symbol error rate with the measured CSI, relative to that yielded by the output of the theoretical LOS channel model, is insignificant.

This paper proposes a new antenna array design of Massive MIMO for capacity enhancement in line of sight (LOS) environments. Massive MIMO has two key problems: the heavy overhead of feeding back the channel state information (CSI) for very large number of transmission and reception antenna element pairs and the huge computation complexity imposed by the very large scale matrixes. We have already proposed a practical application of Massive MIMO, that is, Massive Antenna Systems for Wireless Entrance links (MAS-WE), which can clearly solve the two key problems of Massive MIMO. However, the conventional antenna array arrangements; e.g. uniform planar array (UPA) or uniform circular array (UCA) degrade the system capacity of MAS-WE due to the channel spatial correlation created by the inter-element spacing. When the LOS component dominates the propagation channel, the antenna array can be designed to minimize the inter-user channel correlation. We propose an antenna array arrangement to control the grating-lobe positions and achieve very low channel spatial correlation. Simulation results show that the proposed arrangement can reduce the spatial correlation at CDF=50% value by 80% compared to UCA and 75% compared to UPA.

In this paper a new method for noise removal from single-trial event-related potentials recorded with a multi-channel electroencephalogram is addressed. An observed signal is separated into multiple signals with a multi-channel Wiener filter whose coefficients are estimated based on parameter estimation of a probabilistic generative model that locally models the amplitude of each separated signal in the time-frequency domain. Effectiveness of using prior information about covariance matrices to estimate model parameters and frequency dependent covariance matrices were shown through an experiment with a simulated event-related potential data set.

Distributed antenna systems (DASs) combined with multi-user multiple-input multiple-output (MU-MIMO) transmission techniques have recently attracted significant attention. To establish MU-MIMO DASs that have wide service areas, the use of a dynamic clustering scheme (CS) is necessary to reduce computation in precoding. In the present study, we propose a simple method for dynamic clustering to establish a single cell large-scale MU-MIMO DAS and investigate its performance. We also compare the characteristics of the proposal to those of other schemes such as exhaustive search, traditional location-based adaptive CS, and improved norm-based CS in terms of sum rate improvement. Additionally, to make our results more universal, we further introduce spatial correlation to the considered system. Computer simulation results indicate that the proposed CS for the considered system provides better performance than the existing schemes and can achieve a sum rate close to that of exhaustive search but at a lower computational cost.

We herein describe an autonomous peer discovery scheme for Device-to-Device (D2D) communications. With the increasing popularity of D2D communications, an efficient means of finding the neighboring node, i.e., peer discovery, is required. To this end, we propose a new autonomous peer discovery scheme that uses azimuth spread (AS), delay spread (DS), and shadow fading of the uplink pilot from each mobile station (MS). Given that AS, DS, and shadow fading are spatially correlated, nodes that have similar values must be neighbors. The proposed scheme filters out the MSs that are unlikely to be neighbors and uses the Kolmogorov-Smirnov (K-S) test to improve the accuracy of neighbor discovery. Unlike previous peer discovery schemes that incur additional signaling overheads, our proposal finds neighboring nodes by using the existing uplink pilot transmission from MSs such that neighboring peers can be found autonomously. Through analysis and simulation, we show that neighboring MSs can be found accurately with low latency.

In order to verify the channel sum-rate improvement by multi-user multiple-input multiple-output (MU-MIMO) transmission in distributed antenna systems (DASs), we investigate and compare the characteristics of channel sum-rates in both centralized antenna systems (CASs) and DASs under the effects of path loss, spatially correlated shadowing, correlated multi-path fading, and inter-cell interference. In this paper, we introduce two different types of functions to model the shadowing, auto-correlation and cross-correlation, and a typical exponential decay function to model the multi-path fading correlation. Thus, we obtain the distribution of the channel sum-rate and investigate its characteristics. Computer simulation results indicate that DAS can improve the performance of the channel sum-rate compared to CAS, even in the case under consideration. However, this improvement decreases as interference power increases. Moreover, the decrease in the channel sum-rate due to the increase in the interference power becomes slow under the effect of shadowing correlation. In addition, some other analyses on the shadowing correlation that occurs on both the transmit and receiver sides are provided. These analysis results show that the average channel sum-rate in a DAS without inter-cell interference considerably decreases because of the shadowing correlation. In contrast, there appears to be no change in the CAS. Furthermore, there are two different types of sum-rate changes in a DAS because of the difference in shadowing auto-correlation and cross-correlation.

The performance in terms of the user separation of multi-user multiple-input multiple-output (MU-MIMO) depends on not only the spatial correlation but also the location of the mobile stations (MSs). In order to take into account the performance in terms of the user separation, we need to consider the granularity of the beam and null width of the precoded antenna pattern in addition to the spatial correlation to determine the base station (BS) antenna configuration. In this paper, we propose Smart Vertical MIMO (SV-MIMO) as the best antenna configuration that achieves both spatial correlation and granularity of the beam and null width of the precoded antenna pattern. We evaluate SV-MIMO in a field experiment using a downlink 4-by-2 MU-MIMO configuration focusing on the dependency of the location of the MSs in Yokosuka, Japan. The majority of the measurement course is under line-of-sight (LOS) conditions in a single cell environment. The MSs are almost uniformly set 30 to 60 degrees in azimuth and 12 to 30 degrees in elevation and the distance from the BS antennas is approximately 150m at maximum. We also evaluate the performance of 4-by-2 MU-MIMO using the conventional type of horizontal array antenna and show the difference. The field experimental results show that throughput of greater than 1Gbps is achieved at the Cumulative Distribution Function (CDF) of 14% by employing SV-MIMO for Rank-4 MU-MIMO. The throughput of SV-MIMO is 30% higher than that for the horizontal array antenna configuration at the CDF of 50%.

Energy harvesting technology was introduced into wireless sensor networks (WSNs) to solve the problem of the short lifetimes of sensor nodes. The technology gives sensor nodes the ability to convert environmental energy into electricity. Sufficient electrical energy can lengthen the lifetime and improve the quality of service of a WSN. This paper proposes a novel use of mutual information to evaluate data transmission behavior in the energy harvesting WSNs. Data at a sink for a node deteriorates over time until the next periodic transmission from the node is received. In this paper, we suggest an optimized intermittent transmission method for WSNs that harvest energy. Our method overcomes the problem of information deterioration without increasing energy cost. We show that by using spatial correlation between different sensor nodes, our proposed method can mitigate information deterioration significantly at the sink.

Spatial correlation is an index for evaluating performance of multi-antenna systems. Although various equations exist, the distinction remains evasive. This paper presents applicable condition of equations for spatial correlation coefficient considering propagation channels. We reveal that under Rayleigh fading environments, the spatial correlation is properly evaluated by the equation based on three-dimensional radiation patterns, however, under environments with strong direct waves, the equation based on the channel matrix should be used for the evaluation.

A method to estimate sound source orientation in a reverberant room using a microphone array is proposed. We extend the conventional modeling of a room transfer function based on the image method in order to take into account the directivity of a sound source. With this extension, a transfer function between a sound source and a listener (or a microphone) is described by the superposition of transfer functions from each image source to the listener multiplied by the source directivity; thus, the sound source orientation can be estimated by analyzing how the image sources are distributed (power distribution of image sources) from observed signals. We applied eigenvalue analysis to the spatial correlation matrix of the microphone array observation to obtain the power distribution of image sources. Bsed on the assumption that the spatial correlation matrix for each set of source position and orientation is known a priori, the variation of the eigenspace can be modeled. By comparing the eigenspace of observed signals and that of pre-learned models, we estimated the sound source orientation. Through experiments using seven microphones, the sound source orientation was estimated with high accuracy by increasing the reverberation time of a room.

This paper addresses the problem of sensor selection in wireless sensor networks (WSN) subject to a distortion constraint. To do so, first, a cost function is derived based on the spatial correlation obtained using the best estimation of the event source. Then, a new adaptive algorithm is proposed in which the number of active sensors is adaptively determined and the best topology of the active set is selected based on the add-one-sensor-node-at-a-time method. Simulations results show that the active sensors selected using the proposed cost function have less event distortion. Also, it is shown that the proposed sensor selection algorithm is near optimum and it has better performance than other algorithms with regard to the computational burden and distortion.

This letter investigates the effects of spatial correlation on several multiple antenna schemes in multiuser environments. Using an order statistics upper bound on achievable capacity, we quantify the interaction among spatial correlation, spatial diversity, spatial multiplexing and multiuser diversity. Also, it is verified that the upper bound is tighter than asymptotic capacity when the number of users is relatively small.

Device mismatch plays an important role in the design of accurate analog circuits. The common centroid structure is commonly employed to reduce device mismatches caused by symmetrical layouts and processing gradients. Among the candidate placements generated by the common centroid approach, however, whichever achieves better matching is generally difficult to be determined without performing the time-consuming yield evaluation process. In addition, this rule-based methodology makes it difficult to achieve acceptable matching between multiple capacitors and to handle an irregular layout area. Based on a spatial correlation model, this study proposed a design methodology for yield enhancement of analog circuits using switched-capacitor techniques. An efficient and effective placement generator is developed to derive a placement for a circuit to achieve the highest or near highest correlation coefficient and thus accomplishing a better yield performance. A simple yield analysis is also developed to evaluate the achieved yield performance of a derived placement. Results show that the proposed methodology derives a placement which achieves better yield performance than those generated by the common centroid approach.

This paper describes a spatial fading emulator based on Clarke's model that can evaluate spatial correlation characteristics between signals received by handset antennas including human-body effect under emulated multipath propagation environments. The proposed model is composed of scatterers, phase-shifters and attenuators. The scatterers are located at equal intervals on the circumference of a circle. Phase shifters and attenuators in a control circuit are used to control the phase and amplitude of each wave radiated from the scatterers in order to emulate multi-path propagation environments, such as Rayleigh or Nakagami-Rice distribution, to be generated at their center. In this paper, the maximum distance between receiving antennas that could be used to evaluate spatial correlation characteristics between antennas was investigated experimentally. The measurement results show that 15 scatterers with a radius of 1.5 m are sufficient to evaluate spatial correlation characteristics within the branch separation of 1.7 λ when parallel dipole antennas are used as receiving antennas.

Future high-resolution short-range automotive radar will have a higher false alarm probability than the conventional low-resolution radar has. In a high-resolution radar, the reception signal becomes sensitive to the difference between intended and unintended objects. However, automotive radars must distinguish targets from background objects that are the same order of size; it leads to an increase in the false alarm probability. In this paper, a CFAR circuit for obtaining the target mean power, as well as the background mean power, is proposed to reduce the false alarm probability for high-resolution radars working in automotive environments. The proposed method is analytically evaluated with use of the characteristic function method. Spatial correlation is also considered in the evaluation, because the sizes of the both target and background objects approach the dimension of several range cells. Result showed the proposed CFAR with use of two alongside range cells could reduce the ratio of 6.4 dB for an example of an automotive situation.

In this paper, a novel intra-die spatial correlation extraction method referred to as MLEMTC (Maximum Likelihood Estimation for Multiple Test Chips) is presented. In the MLEMTC method, a joint likelihood function is formulated by multiplying the set of individual likelihood functions for all test chips. This joint likelihood function is then maximized to extract a unique group of parameter values of a single spatial correlation function, which can be used for statistical circuit analysis and design. Moreover, to deal with the purely random component and measurement error contained in measurement data, the spatial correlation function combined with the correlation of white noise is used in the extraction, which significantly improves the accuracy of the extraction results. Furthermore, an LU decomposition based technique is developed to calculate the log-determinant of the positive definite matrix within the likelihood function, which solves the numerical stability problem encountered in the direct calculation. Experimental results have shown that the proposed method is efficient and practical.