We developed flexible LC devices using coat-debond polyimide substrates with a low birefringence and etched post spacers, and clarified that flexible LCDs using post spacers with small spacer distance have a high flexibility without degradation of the image quality. This result ensured the feasibility of flexible LCDs using coat-debond method.

We have proposed composite films composed of a molecular-aligned polymer and liquid crystal (LC) for substrate-free liquid crystal displays with high-contrast images. We successfully controlled the molecular alignment of the LC and formed molecular-aligned LC droplets in the polymer by controlling the fluidity of the LC/monomer mixture and the curing rate of the monomer.

A Uniform Lying Helix (ULH) liquid crystal device (LCD) fabricated by utilizing the characteristics of shear flow alignment as well as dielectric anisotropy was demonstrated. Cholesteric liquid crystals with a short helical pitch can exhibit an electric field-induced tilt. These experimental results indicate that it is possible to realize a high-speed response flexible LCD using plastic substrates.

A black mask (BM) is a layer used to improve the display quality by suppressing light leakage. In general, the BM is formed by a photolithography process. In this study, a novel technique for the fabrication of a quasi-black mask (q-BM) is proposed; the q-BM was composed of vertical and hybrid orientation areas, patterned by a separation coating technique using an electro-spray deposition method. Using our technique, the q-BM can be formed easily without the additional masks used for the BM.

A continuous flow reactor equipped with a low-loss flow channel and a microwave cavity was developed for synthesizing nanophosphors. A continuous solution synthesis of YVO₄:Eu,Bi nanophosphor was succeeded through the rapid hydrothermal method using this equipment. Internal quantum efficiency of YVO₄:Eu,Bi nanophosphor obtained by 20 minutes microwave heating is about 30% at 320 nm as high as that obtained by 6 hours hydrothermal treatment in autoclave.

In the present paper we show how to obtain rapidly the spectral BRDF and BTDF of different display components or transparent displays using Fourier optics system under different illumination configurations. Results can be used to simulate the entire structure of a LCD display or to predict transparent display performances under various illuminations.

In order to realize high-yield speckle modulation, we developed a novel spatial light modulator using zinc oxide single crystal doped with nitrogen ions. The distribution of dopants was optimized to induce characteristic optical functions by applying an annealing method developed by us. The device is driven by a current in the in-plane direction, which induces magnetic fields. These fields strongly interact with the doped material, and the spatial distribution of the refractive index is correspondingly modulated via external control. Using this device, we experimentally demonstrated speckle modulation, and we discuss the quantitative superiority of our approach.

We investigate the influence of launching conditions on misalignment tolerance of pluggable ballpoint-pen interconnects, where graded-index plastic optical fibers (GI POFs) are coupled with ball lenses mounted on their end faces. The lateral-misalignment tolerance of the ballpoint-pen connector decreased with an increase in the driving current of a vertical cavity surface emitting laser (VCSEL) under the center launching condition. This was attributed to the VCSEL multimode oscillation, which increased the connector coupling loss through the higher-order guided mode launching in the GI POF and the resulting output beam expansion in the ballpoint-pen connector. The driving-current dependence of the connector coupling loss could be decreased using offset launchings. For a radial launching offset of 20µm, we could obtain coupling losses below 1dB for lateral coupling offsets of ±50µm with little dependence on the driving current. This suggests that data transmission quality for misaligned connection of the GI POFs can be improved further by optimizing launching systems for the ballpoint-pen interconnects.

This paper proposes an address power reduction method for plasma display panels (PDPs) using subfield data smoothing based on a visual masking effect. High-resolution, high-frame-rate PDPs have large address power loss caused by parasitic capacitance. Although the address power is reduced by smoothing the subfield data, noise is generated. The proposed method reduces the address power while maintaining the image quality by choosing the smoothing area of the address data based on the visual masking effect. The results of subjective assessment for the images based on smoothed address data indicate that image quality is maintained.

We investigated effects of ultraviolet illuminance and ratio of high- to low-refractive-index monomers on the layer structure and light diffusion properties of light-diffusing films with alternating polymer layer structures. We clarified that an increasing difference in refractive index between alternating polymer layers induced an increase in the diffusion angle.

Microwave heating is expected to increase the yield of product, to decrease the reaction time, and to discover the new reaction system. The Rolling Circle Amplification (RCA) is an enzymatic synthesis method of deoxyribonucleic acid (DNA) strands with repeated sequence of a circulate template-DNA. In previous study, controlled microwave heating accelerated the maximum 4-fold compared with the conventional condition. Further, we indicated that the selectively heat of some buffer components by microwave irradiation induced the acceleration of RCA. The purpose of this research is to clarify the relationship between the microwave heating and buffer components. The understanding of role of ion-containing buffer components under microwave will be able to control the microwave-assisted enzymatic reaction. We studied the relation between the microwave power loss and RCA components via dielectric measurements, cavity resonator feature measurement, and electromagnetic simulation. Electromagnetic simulation of the TM₀₁₀ cavity showed that the sample tube was heated only by an electric field. The buffer containing ions of the RCA components was selectively heated via microwave irradiation in the TM₀₁₀ cavity resonator.

A modularized, low-cost, and non-invasive electrochemical examination platform is proposed in this work. Melatonin has been found to be a possible significant indicator molecule in the detection of breast cancer. 3-hydroxyanthranilic acid and nuclear matrix protein 22 can be used as a significant index for potential bladder cancer risks. The proposed system was verified by measuring the melatonin, 3-hydroxyanthranilic acid and nuclear matrix protein 22. Cyclic voltammetry and molecularly imprinted polymers were used in the experiments. Screen-printed electrodes were coated with a film imprinted with target molecules. The measurement results of the proposed system were compared with those of a commercial potentiostat. The two sets of results were very similar. Moreover, the proposed system can be expanded to a four-channel system, which can perform four measurements simultaneously. The proposed system also provides convenient graphical user interface for real-time monitoring and records the information of the redox reactions.