We introduce a new aquatic display optical system based on aerial imaging by retro-reflection (AIRR). This system places passive optical components (a beam splitter and retro-reflector) in water to eliminate disturbances due to water motion. To demonstrate the effectiveness of the proposed optical system, we develop a prototype optical system and compensate for the motion of the water surface. We analyze the motion compensation and quantify its effectiveness using peak signal-to-noise ratio (PSNR) and structural similarity (SSIM) metrics. From these results, we see that the optical system maintains a static image in water even when the water surface is undulating.

In this paper, we propose a method for video reflection removal using a video restoration framework with enhanced deformable networks (EDVR). We examine the effect of each module in EDVR on video reflection removal and modify the models using 3D convolutions. The performance of each modified model is evaluated in terms of the RMSE between the structural similarity (SSIM) and the smoothed SSIM representing temporal consistency.

A metasurface absorber capable of monitoring two-dimensional (2-d) electric field distributions has been developed, where a matrix of lumped resistors between surface patches formed on a mushroom-type structure works as a 2-d array of short dipole sensors. In this paper absorption and reflection of a spherical wave incident on the metasurface absorber are analyzed by numerical computation by the plane-wave spectrum (PWS) technique using 2-d Fourier analysis. The electromagnetic field of the spherical wave incident on the absorber surface is expanded into a large number of plane waves, for each of which the TE and TM reflection and absorption coefficients are applied. Then by synthesizing all the plane wave fields we obtain the spatial distributions of reflected and absorbed fields. The detailed formulation of the computation is described, and the computed field distributions are compared with those obtained by simulation and actual measurement when the spherical wave from a dipole is illuminated onto a metasurface absorber. It is demonstrated that the PWS technique is effective and efficient in obtaining the accurate field distributions of the spherical wave on and around the absorber. This is useful for evaluating the performance of the metasurface absorber to absorb and measure the spherical wave field distributions around an EM source.

Thin films of Teflon AF 1600 were prepared by an electron-assisted (e-assist) deposition method. IR analysis revealed that the e-assist deposition generates small amount of polar groups such as carboxylic acid in the molecular structure of the deposited films. The polar groups contributed to increase intermolecular interaction and led to remarkable improvement in the adhesion strength and robustness of the films especially when a bias voltage was applied to the substrate in the course of e-assist deposition. The vapor-deposited Teflon AF films had refractive indices of 1.35 to 1.38, and were effective for antireflection coatings. The use of e-assist deposition slightly increased the refractive index as a trade-off for the improvement of film robustness.

Accurate fish detection is of great significance in aquaculture. However, the non-uniform strong reflection in aquaculture ponds will affect the precision of fish detection. This paper combines YOLOv4 and CVAE to accurately detect fishes in the image with non-uniform strong reflection, in which the reflection in the image is removed at first and then the reflection-removed image is provided for fish detecting. Firstly, the improved YOLOv4 is applied to detect and mask the strong reflective region, to locate and label the reflective region for the subsequent reflection removal. Then, CVAE is combined with the improved YOLOv4 for inferring the priori distribution of the Reflection region and restoring the Reflection region by the distribution so that the reflection can be removed. For further improving the quality of the reflection-removed images, the adversarial learning is appended to CVAE. Finally, YOLOV4 is used to detect fishes in the high quality image. In addition, a new image dataset of pond cultured takifugu rubripes is constructed,, which includes 1000 images with fishes annotated manually, also a synthetic dataset including 2000 images with strong reflection is created and merged with the generated dataset for training and verifying the robustness of the proposed method. Comprehensive experiments are performed to compare the proposed method with the state-of-the-art fish detecting methods without reflection removal on the generated dataset. The results show that the fish detecting precision and recall of the proposed method are improved by 2.7% and 2.4% respectively.

In this paper, the spurious modes and quality-factor (Q) values of the one-port dual-mode AlN lamb-wave resonators at 500-1000 MHz were studied by theoretical analysis and experimental verification. Through finite element analysis, we found that optimizing the width of the lateral reflection boundary at both ends of the resonator to reach the quarter wavelength (λ/4), which can improve its spectral purity and shift its resonant frequency. The designed resonators were micro-fabricated by using lithography processes on a 6-inch wafer. The measured results show that the spurious mode can be converted and dissipated, splitting into several longitudinal modes by optimizing the width of the lateral reflection boundary, which are consistent well with the theoretical analysis. Similarly, optimizing the interdigital transducer (IDT) width and number of IDT fingers can also suppress the resonator's spurious modes. In addition, it is found that there is no significant difference in the Qs value for the two modes of the dual-mode resonator with the narrow anchor and full anchor. The acoustic wave leaked from the anchor into the substrate produces a small displacement, and the energy is limited in the resonator. Compared to the resonator with Au IDTs, the resonator with Al IDTs can achieve a higher Q value due to its lower thermo-elastic damping loss. The measured results show the optimized dual-mode lamb-wave resonator can obtain Qs value of 2946.3 and 2881.4 at 730.6 MHz and 859.5 MHz, Qp values of 632.5 and 1407.6, effective electromechanical coupling coefficient (k2eff) of 0.73% and 0.11% respectively, and has excellent spectral purity simultaneously.

This paper details the design of a plate that controls the beam direction in an aperture array excited by a waveguide 2-plane hybrid coupler. The beam direction can be controlled in the range of ±15-32deg. in the quasi H-plane, and ±26-54deg. in the quasi E-plane at the design frequency of 66.425GHz. Inductive irises are introduced into tapered waveguides in the plate and the reflection is suppressed by narrow apertures. A plate that has a larger tilt angle in the quasi E-plane and another plate with conventional rectangular waveguide ports as a reference are fabricated and measured. The measured values agree well with the simulation results.

In this paper, the influence of surface waves on the characteristics of on-glass antennas is clarified to enable appropriates design of C-band automotive on-glass antennas. Composite glasses are used in automotive windshields. These automotive composite glasses are composed of three layers. First, the surface wave properties of composite glass are investigated. Next, the effects of surface waves on the reflection coefficient characteristics of on-glass antennas are investigated. Finally, the antenna placement to reduce surface wave effect will be presented. Electromagnetic field analysis of a dipole antenna placed at the center of a 300mm × 300mm square flat composite glass showed that the electric field strength in the glass had ripples with the half wavelength period of the surface waves. Therefore, it was confirmed that standing waves are generated because of these surface waves. In addition, it is confirmed that ripples occur in the reflection coefficient at frequencies. Glass size is divisible by each of those guide wavelengths. Furthermore, it was clarified that the reflection coefficient fluctuates with respect to the distance between the antenna and a metal frame, which is attached to the end face in the direction perpendicular to the thickness of the glass because of the influence of standing waves caused by the surface waves; additionally, the reflection coefficient gets worse when the distance between the antenna and the metal frame is an integral multiple of one half wavelength. A similar tendency was observed in an electric field analysis using a model that was shaped like the actual windshield shape. Because radiation patterns also change as a result of the influence of surface waves and metal frames, the results imply that it is necessary to consider the actual device size and the metal frames when designing automotive on-glass antennas.

Multi-Mouse Quiz (MMQ) is a quiz application based on the Single Display Groupware (SDG)[1] concept through which several users can answer quizzes by sharing a computer to take the quiz in a classroom or any other learning environment. We conducted a practice, where we used the MMQ to support collaborative learning, which was combined with a museum visit. In the previous research, we found that the 3rd-grade children were able to operate the MMQ without any special assistance from the researchers, and that their use of the MMQ was characterized by high engagement[2]. In this study, we also conducted qualitative evaluation in the form of observation data and a free description of the questionnaire; we found that, compared to previous studies, which used MMQ with 6th-grade children, the 3rd-grade were more willing to use body language to express their emotions, and this tendency made the whole class more active. Furthermore, MMQ quiz learning inspired children with reflection perspectives to participate in the museum activity and activities in the computer room.

It is well known that the power transfer efficiency (PTE) of a wireless power transfer (WPT) system is maximized at a specific coupling coefficient under the fixed system parameters. For an adaptive WPT system, various attempts have been made to achieve the maximum PTE by changing the system parameters. Applying the input matching networks to the WPT system is one of the most popular implementation methods to change the source impedance and improve the PTE. In this paper, we derive the optimum source condition for the given load and the achievable maximum PTE under the optimum source condition in a closed-form. Furthermore, we propose a method to estimate the input impedance, without feedback information, and an input matching network structure that transforms the source impedance into the optimum source obtained from the estimated input impedance. The proposed technique is successfully implemented at a resonant frequency of 13.56MHz. The experimental results are in close agreement with the theoretical achievable maximum PTE and show that the use of only a single matching network can sufficiently achieve a PTE close to the ideal maximum PTE.

In this paper, we propose a novel method to extrinsically calibrate a camera to a 3D reference object that is not directly visible from the camera. We use a human cornea as a spherical mirror and calibrate the extrinsic parameters from the reflections of the reference points. The main contribution of this paper is to present a cornea-reflection-based calibration algorithm with a simple configuration: five reference points on a single plane and one mirror pose. In this paper, we derive a linear equation and obtain a closed-form solution of extrinsic calibration by introducing two ideas. The first is to model the cornea as a virtual sphere, which enables us to estimate the center of the cornea sphere from its projection. The second is to use basis vectors to represent the position of the reference points, which enables us to deal with 3D information of reference points compactly. We demonstrate the performance of the proposed method with qualitative and quantitative evaluations using synthesized and real data.

This paper presents a meta-structured circular polarized array antenna with wide scan angle. In order to widen the scanning angle of array antennas, this paper investigates unit antenna beamwidth and the coupling effects between array elements, both of which directly affect the steering performance. As a result, the optimal array distance, the mode configuration, and the antenna structure are elucidated. By using the features of the miniaturized mu-zero resonance (MZR) antenna, it is possible to design the antenna at optimum array distance for wide beamwidth. In addition, by modifying via position and gap configuration of the antenna, it is possible to optimize the mode configuration for optimal isolation. Finally, the 3dB steerable angle of 66° is successfully demonstrated using a 1x8 MZR CP antenna array without any additional decoupling structure. The measured beam patterns at a scan angle of 0°, 22°, 44°, and 66°agree well with the simulated beam patterns.

We present a human point of gaze estimation system using corneal surface reflection and omnidirectional image taken by spherical panorama cameras, which becomes popular recent years. Our system enables to find where a user is looking at only from an eye image in a 360° surrounding scene image, thus, does not need gaze mapping from partial scene images to a whole scene image that are necessary in conventional eye gaze tracking system. We first generate multiple perspective scene images from an omnidirectional (equirectangular) image and perform registration between the corneal reflection and perspective images using a corneal reflection-scene image registration technique. We then compute the point of gaze using a corneal imaging technique leveraged by a 3D eye model, and project the point to an omnidirectional image. The 3D eye pose is estimate by using the particle-filter-based tracking algorithm. In experiments, we evaluated the accuracy of the 3D eye pose estimation, robustness of registration and accuracy of PoG estimations using two indoor and five outdoor scenes, and found that gaze mapping error was 5.546 [deg] on average.

To prepare antireflection coating (ARC) by wet process is important technology for low cost fabrication of solar cells. In this research, we consider the optical reflectance of a three layer stack structure of ARC films on the pyramidally textured single-crystalline silicon substrates. Each layer of the ARC films is deposited by a spin-coating method. The triple layers consist of SiO2, SiO2-TiO2 mixture, and TiO2 films from air to the silicon substrate in that order, and the refractive index is slightly increased from air to the substrate. Light reflection can be reduced further mainly due to graded index effect. The optimized three layer structure ARC shows that the reflectance is below 0.048 at the wavelength of 600 nm.

The most commonly used scattering parameters (S parameters) are normalized to a real reference resistance, typically 50Ω. In some cases, the use of S parameters normalized to some complex reference impedance is essential or convenient. But there are different definitions of complex-referenced S parameters that are incompatible with each other and serve different purposes. To make matters worse, different simulators implement different ones and which ones are implemented is rarely properly documented. What are possible scenarios in which using the right one matters? This tutorial-style paper is meant as an informal and not overly technical exposition of some such confusing aspects of S parameters, for those who have a basic familiarity with the ordinary, real-referenced S parameters.

This paper proposes a new design formula of coupling coefficient between antenna and resonator for an efficient design of filtering antennas consisting of an antenna and resonators. The filtering antenna can be designed by introducing a well-established filter design theory. For such a design approach, an external Q factor at input port, coupling coefficients, and a radiation Q factor of the antenna need to be evaluated. However, conventional design methods have a time-consuming procedure, since there are no effective techniques to evaluate the coupling coefficient between resonator and antenna. To solve the problem, we derive the new design formula using only amplitude property of input reflection responses obtained from a coupled structure of resonator and antenna. As an example, a third-order filtering antenna is synthesized, designed, and tested at 2.45 GHz, which numerically and experimentally validates the effectiveness of the derived equation.

This paper proposes reflection and transmission control panels using artificially designed materials. As the artificially designed material, finite- and infinite-length metal wire array sheets are used here. Laminated structures consisting of the metal wire array sheets and dielectric material are proposed. Reflection and transmission characteristics of these structures can be controlled by changing the metal wire parameters such as wire length, spacing gaps between the wires, and the dielectric material's thickness and relative permittivity. The reflection and transmission characteristics of the laminated structures are evaluated by measurements in free space and by transmission line theory.

This paper presents a spatial division (SD) transmission method based on two-ray fading that dispenses with the high signal processing cost of multiple-input and multiple-output (MIMO) detection and antennas with narrow beamwidth. We show the optimum array geometries as functions of the transmission distance for providing a concrete array design method. Moreover, we clarify achievable channel capacity considering reflection coefficients that depend on the polarization, incident angle, and dielectric constant. When the ground surface is conductive, for two- and three-element arrays, channel capacity is doubled and tripled, respectively, over that of free space propagation. We also clarify the application limit of this method for a dielectric ground by analyzing the channel capacity's dependency on the dielectric constant. With this method, increased channel capacity by SD transmission can be obtained merely by placing antennas of wireless transceiver sets that have only SISO (single-input and single-output) capability in a two-ray propagation environment. By using formulations presented in this paper for the first time and adding discussions on the adoption of polarization multiplexing, we clarify antenna geometries of SD transmission systems using polarization multiplexing for up to six streams.

This paper focuses on the S-parameter method that is a basic method for measuring the input impedance of balanced-fed antennas. The basic concept of the method is summarized using the two-port network, and it is shown that the method can be enhanced to the unbalanced antennas using a formulation based on incident and reflected waves. The compensation method that eliminates the influence of a measurement jig and the application of the S-parameter method for the measurement of a radiation pattern with reduced unbalanced currents are explained. Further, application of the method for measuring the reflection and coupling coefficients of multiple antennas is introduced. The measured results of the input impedance of a dipole antenna, radiation patterns of a helical antenna on a small housing, and S-parameters of multiple antennas on a small housing are examined, and the measured results obtained with the S-parameter method are verified.

We proposed a method for estimating sound source positions in 3D space by integrating sound directions estimated by multiple microphone arrays and taking advantage of reflection information. Two types of sources with different directivity properties (human speech and loudspeaker speech) were evaluated for different positions and orientations. Experimental results showed the effectiveness of using reflection information, depending on the position and orientation of the sound sources relative to the array, walls, and the source type. The use of reflection information increased the source position detection rates by 10% on average and up to 60% for the best case.