This paper presents the forcible resonant characteristics of a cutoff cavity-backed slot radiator. It has a feed post and a parasitic post inserted parallel to the slot width, done by adding a single external reactance to the top or the bottom side of the parasitic post. The basic radiator characteristics for a perfect matching to a 50-Ω coaxial line due to the connecting position of the external reactance are discussed. Comparisons show that the bandwidth of the top side loading is narrower than the bottom side loading case. The theoretical analysis is verified by the measured return loss.

A circular cavity resonance method is improved to measure the frequency dependence of complex permittivity of a dielectric plate by using multimode TE0m1 with integer m. The measurement principle is based on a rigorous analysis by the Ritz-Galerkin method. A new circular cavity with lowered height is designed from a mode chart of a cavity to decrease the number of unwanted modes near the TE0m1 modes. A copper cavity having 20 GHz for the TE011 mode was constructed based on this design. For glass cloth PTFE, RT/duroid 6010 and FR-4 dielectric plates, the frequency dependences are measured from resonant frequencies for the TE0m1 (m = 1, 2, 3 ...) modes. These measured results agree well with ones measured by using the conventional four different size cavities with TE011 mode. It is verified that the designed cavity structure is useful to measure the frequency dependence of low loss dielectric plates.

A design of the tunable superconducting power filter is described. The filter consists of superconducting microwave cavities with a mechanical tuning method. The electromagnetic simulations using niobium cavity suggested that there were conditions where the resonator with high-unloaded Q can realize a fractional center frequency change of more than 10% by using a Nb rod moving in the cavity. The simulations approximated the resonant frequency dependence of the rod moved by a cryogenic actuator in the tunable cavity experiment. In addition, the simulation of the power handling capability showed a feasibility of the value more than 50 dBW.

Radar cross sections of polygonal cylinders are investigated by using a kind of mode matching methods. Applying two types of novel field-decomposition techniques, electromagnetic scattering analysis can be performed very precisely. We will discuss computational accuracy of our proposed method and the proper choice of field-decomposition techniques for a rectangular cylinder with various shapes of wedge cavities and bumps.

We have developed InGaAs-based VCSELs operating around 1.1 µm for high-speed optical interconnections. By applying GaAsP barrier layers, temperature characteristics were considerably improved compared to GaAs barrier layers. As a result, 25 Gbps 100 error-free operation was achieved. These devices also exhibited high reliability. No degradation was observed over 3,000 hours under operation temperature of 150 and current density of 19 kA/cm2. We also developed VCSELs with tunnel junctions for higher speed operation. High modulation bandwidth of 24 GHz and a relaxation oscillation frequency of 27 GHz were achieved. 40 Gbps error-free operation was also demonstrated.

Optical buffer memory for 10-Gb/s data signal is demonstrated experimentally using a polarization bistable vertical-cavity surface-emitting laser (VCSEL). The optical buffer memory is based on an optical AND gate function and the polarization bistability of the VCSEL. Fast AND gate operation responsive to 50-ps-width optical pulses is achieved experimentally by increasing the detuning frequency between an injection light into the VCSEL and a lasing light from the VCSEL. A specified bit is extracted from the 10-Gb/s data signal by the fast AND gate operation and is stored as the polarization state of the VCSEL by the polarization bistability. The corresponding numerical simulations are also performed using two-mode rate equations taking into account the detuning frequency. The simulation results confirm the fast AND gate operation by increasing the detuning frequency as well as the experimental results.

Radiation of a Hertzian dipole placed within a cylindrical cavity with narrow slots is investigated. Narrow axial and transverse slots are considered. Scattered fields are expanded in terms of eigenfunctions and boundary conditions are enforced to obtain a set of simultaneous equations. Computations are performed to check the validity of the formulation.

An ultra-deep polymer cavity structure exposed using deep X-ray lithography is used as a template for metal electroforming to produce a 24-GHz cavity resonator. The metal cavity is 1.8 mm deep and has impressive structure, including extremely vertical and smooth sidewalls, resulting in low conductor loss. The measured resonator has an unloaded quality factor of above 1800 at a resonant frequency of 23.89 GHz.

In this paper we propose a novel spatial fading simulator to evaluate the performance of an array antenna and show its spatial stochastic characteristics by computer simulation based on parameters verified by experimental data. We introduce a cavity-excited circular array (CECA) as a fading simulator that can simulate realistic mobile communication environments. To evaluate the antenna array, two stochastic characteristics are necessary. The first one is the fading phenomenon and the second is the angular spread (AS) of the incident wave. The computer simulation results with respect to fading and AS show that CECA works well as a spatial fading simulator for performance evaluation of an antenna array. We first present the basic structure, features and design methodology of CECA, and then show computer simulation results of the spatial stochastic characteristics. The results convince us that CECA is useful to evaluate performance of antenna arrays.

The effect of a cavity on the third-order optical nonlinearity, is studied for a two-level system with excitation frequency ω0, as a function of the Q factor, coupling constant g, and longitudinal (γ1) and pure transverse (γ2) damping constants. The largest enhancement is found in the strong-coupling regime with γ1+2γ2=ω0/2Q. Large enhancement is also achieved in the weak-coupling regime satisfying the condition , and the intensity depends on damping constants only. The calculation is based on the cavity QED because the semiclassical treatment of the cavity quasimode leads to incorrect optical nonlinearity.

Power bus noise problem has become a major concern for both EMC engineers and board designers. A fast algorithm, based on the cavity-mode model, was employed for analyzing resonance characteristics of multilayer power bus stacks interconnected by vias. The via is modeled as an inductance and its value is given by a simple expression. Good agreement between the simulated results and measurements demonstrates the effectiveness of the cavity-mode model, together with the via model.

Transient scattering from parallel plate waveguide cavities is studied by using the combination of a point matching technique and numerical inversion of Laplace transform. We thoroughly investigate the scattering mechanism for a half-sine pulse and modulated-sine pulse incidence. The advantages and disadvantages on the target recognition are clarified in terms of the internal objects, incident waveforms, and polarizations.

A rigorous analysis for a TM010 mode cylindrical cavity with insertion holes is presented on the basis of the Ritz-Galerkin method to realize accurate measurements of the complex permittivity of liquid. The effects of sample insertion holes, a dielectric tube, and air-gaps between a dielectric tube and sample insertion holes are taken into account in this analysis. The validity of this method is verified from measured results of some kinds of liquid.

Precise designs are presented for sapphire rod resonators of three types, which have been proposed by the IEC/TC90/WG8 in the standard measurement method of the surface resistance Rs of high-Tc superconductor (HTS) films; an open-type, a cavity-type and a closed-type. In order to separate TE011 and TE013 modes, which are used in Rs measurements, from the other modes, appropriate dimensions for these three resonators are determined from mode charts calculated from a rigorous analysis based on the mode matching method, taking account of an uniaxial-anisotropic characteristic of sapphire. Comparison of the open-type resonator with the closed-type is performed. For the open-type, the unloaded Q values of both the TE011 and TE013 modes are reduced by radiations of a leaky state TM310 mode. Finally, validity of the design and a two-sapphire-rod-resonator method will be verified by experiments.

We have demonstrated low-threshold two-dimensional photonic crystal lasers with self-assembled InAs/GaAs quantum dots. Coupled cavity designs of whispering gallery modes are defined in square lattice photonic crystal slabs. Our lasers showed a small 120 µW input pumping power threshold. Actual absorption power is evaluated to be less than 20 µW. Our lasers show high spontaneous emission coupling (β) factors0.1. The mode volumes are expected to be 0.7-1.2 times cubed wavelength by our modelling. Based on threshold analysis, 80 QDs are the effective number of QDs defined as the number of QDs needed to make PC cavities transparent if they are on maximum optical field points. Using the same analysis we found that single quantum dot lasing is likely to occur both by proper alignment of the single quantum dot relative to geometries of photonic crystals and by using sharp QD emission lines in high-Q localized modes.

We propose a novel optical signal processing using an optically pumped vertical-cavity surface-emitting laser (VCSEL) with an external light input. The mode transition between a fundamental and a 1st-high-order transverse mode is induced by an external light injection. Since a single mode fiber (SMF) spatially selects a fundamental transverse mode as an output signal, we are able to realize a nonlinear transfer function, which will be useful in future photonic networks. The mode transition characteristic of a 1.55 µm optically pumped two-mode VCSEL has been simulated by using a two-mode rate equation, which includes the effects of spatial hole burning and spectral hole burning as gain saturation coefficients. We focus on the detuning effect in the injection locking. When the wavelength of an input light with a fundamental mode is slightly longer than that of a VCSEL operating in a 1st-high-order transverse mode, the transverse mode of the VCSEL is switched to a fundamental mode at a critical input power level. This gives us an ideal transfer function for 2R (reamplification and reshaping) regeneration. Also, the proposed scheme may enable polarization insensitive signal processing, which is a unique feature in surface emitting lasers.

In this paper, we present a numerical analysis for resonant characteristics of the TM010 mode of a cylindrical cavity containing a dielectric rod and a conductive layer on its metal walls. This analysis uses the mode matching method for calculation. Error in complex permittivity of a loaded dielectric rod measured using a layered cavity is evaluated as a function of thickness and layered conductor conductivity. A thick layered cavity is necessary for precise measurement of material properties using the cavity resonator method at microwave and millimeter-wave frequencies.

In this paper, we calculated resonant frequency and unloaded Q-factor for the TM0i0 resonant mode excited in a cylindrical cavity composed of walls with finite conductivity and with a dielectric rod loaded coaxially along the central axis. Formulation for the calculation is made using the mode-matching method. Convergence of the calculation is checked. Values calculated by the present method for various combinations of dimensions, permittivity, and conductivity of the inner-components of cavity are compared with those calculated by a conventional method formulated using loss-less electromagnetic fields of cavity. Although the difference between the values calculated by those two methods is usually small, it is found that the difference increases as permittivity of dielectric rod increases and becomes about 10-6 in reciprocal of unloaded Q-factor of the loaded cavity in a presented case.

A frequency-tuning method in the microwave region, which maintains a high unloaded Q-factor, was demonstrated using a double-sapphire-loaded cavity which operates on the Whispering Gallery mode, WGH9,1,0. Two adjacent nominally identical sapphire cylinders were positioned in a copper cavity and tuned by changing their relative coupling. A frequency tuning range of 85 MHz and a maximum unloaded Q-factor of 1.3 105 was experimentally measured at room temperature. This is only 13% less than the single resonator Q-factor, which is a small compromise to pay for the increased tuning capacity.

This paper presents the analysis of the impedance characteristics of a sectoral cylindrical cavity-backed axial slot antenna excited by a probe. The integral equations are derived based on boundary conditions of the proposed structure and they are expressed in terms of dyadic Green functions and unknown current densities. The dyadic Green functions are obtained by using the eigenfunction expansion method together with application of scattering superposition techniques. The unknown current densities are solved by the Method of Moments. The input impedance is subsequently determined from the unknown electric current density at the probe. Numerical results of input impedance and return loss are demonstrated as functions of frequency for various parameters such as cavity length, cavity radius ratio, slot location in φ direction, slot length and probe length. Calculated results are validated by the measurements. At the operating frequency, it is found that the result is sufficiently accurate. The results from this study are very useful for the design of a sectoral cylindrical cavity-backed axial slot array antenna excited by a probe with omnidirectional beam radiation.