Implementation of several wireless applications such as radar systems and source localization is possible with direction of arrival (DOA) estimation, an array signal processing technique. In the past, we proposed a DOA estimation method using deep neural networks (DNNs), which presented very good performance compared to the traditional root multiple signal classification (root-MUSIC) algorithm when the number of radio wave sources is two. However, once three radio wave sources are considered, the performance of that proposed DNN decays especially at low and high signal-to-noise ratios (SNRs). In this paper, mainly focusing on the case of three sources, we present two additional strategies based on our previous method and capable of dealing with each SNR region. The first, which supports DOA estimation at low SNRs, is a scheme that makes use of principal component analysis (PCA). By representing the DNN input data in a lower dimension with PCA, it is believed that the noise corrupting the data is greatly reduced, which leads to improved performance at such SNRs. The second, which supports DOA estimation at high SNRs, is a scheme where several DNNs specialized in radio waves with close DOA are accordingly selected to produce a more reliable angular spectrum grid in such circumstances. Finally, in order to merge both ideas together, we use our previously proposed SNR estimation technique, with which appropriate selection between the two schemes mentioned above is performed. We have verified the superiority of our methods over root-MUSIC and our previous technique through computer simulation when the number of sources is three. In addition, brief discussion on the performance of these proposed methods for the case of higher number of sources is also given.

Backscatter communication is an emerging wireless access technology to realize ultra-low power terminals exploiting the modulated reflection of incident radio wave. This paper proposes a method to measure the phase angle of backscatter link using principal component analysis (PCA). The phase angle measurement of backscatter link at the receiver is essential to maximize the signal quality for subsequent demodulation and to measure the distance and the angle of arrival. The drawback of popular phase angle measurement with naive phase averaging and linear regression analysis is to produce erroneous phase angle, where the phase angle is close to $pmrac{pi}{2}$ radian and the signal quality is poor. The advantage of the proposal is quantified with a computer simulation, a conducted experiment and radio propagation experiments.

Side-channel analysis is one of the most investigated hardware Trojan detection approaches. However, nearly all the side-channel analysis approaches require golden chips for reference, which are hard to obtain actually. Besides, majority of existing Trojan detection algorithms focus on the data similarity and ignore the Trojan misclassification during the detection. In this paper, we propose a cost-sensitive golden chip-free hardware Trojan detection framework, which aims to minimize the probability of Trojan misclassification during the detection. The post-layout simulation data of voltage variations at different process corners is utilized as a golden reference. Further, a classification algorithm based on the combination of principal component analysis and Naïve bayes is exploited to identify the existence of hardware Trojan with a minimum misclassification risk. Experimental results on ASIC demonstrate that the proposed approach improves the detection accuracy ratio compared with the three detection algorithms and distinguishes the Trojan with only 0.27% area occupies even under ±15% process variations.

Intrusion is one of major security issues of internet with the rapid growth in smart and Internet of Thing (IoT) devices, and it becomes important to detect attacks and set out alarm in IoT systems. In this paper, the support vector machine (SVM) and principal component analysis (PCA) based method is used to detect attacks in smart IoT systems. SVM with nonlinear scheme is used for intrusion classification and PCA is adopted for feature selection on the training and testing datasets. Experiments on the NSL-KDD dataset show that the test accuracy of the proposed method can reach 82.2% with 16 features selected from PCA for binary-classification which is almost the same as the result obtained with all the 41 features; and the test accuracy can achieve 78.3% with 29 features selected from PCA for multi-classification while 79.6% without feature selection. The Denial of Service (DoS) attack detection accuracy of the proposed method can achieve 8.8% improvement compared with existing artificial neural network based method.

In this letter, we propose a new color quantization method suppressing saturation decrease. In the proposed method, saturation-based weight and intensity-based weight are used so that vivid colors are selected as the representative colors preferentially. Experiments show that the proposed method tends to select vivid colors even if they occupy only a small area in the image.

In this letter, we propose a color quantization method based on saliency. In the proposed method, the salient colors are selected as representative colors preferentially by using saliency as weights. Through experiments, we verify the effectiveness of the proposed method.

This paper presents a hybrid architecture for a neural network (NN) trained by a particle swarm optimization (PSO) algorithm. The NN is implemented on the hardware side while the PSO is executed by a processor on the software side. In addition, principal component analysis (PCA) is also applied to reduce correlated information. The PCA module is implemented in hardware by the SystemVerilog programming language to increase operating speed. Experimental results showed that the proposed architecture had been successfully implemented. In addition, the hardware-based NN trained by PSO (NN-PSO) program was faster than the software-based NN trained by the PSO program. The proposed NN-PSO with PCA also obtained better recognition rates than the NN-PSO without-PCA.

In order to solve the influence of scale change on target tracking using the drone, a multi-scale target tracking algorithm is proposed which based on the color feature tracking algorithm. The algorithm realized adaptive scale tracking by training position and scale correlation filters. It can first obtain the target center position of next frame by computing the maximum of the response, where the position correlation filter is learned by the least squares classifier and the dimensionality reduction for color features is analyzed by principal component analysis. The scale correlation filter is obtained by color characteristics at 33 rectangular areas which is set by the scale factor around the central location and is reduced dimensions by orthogonal triangle decomposition. Finally, the location and size of the target are updated by the maximum of the response. By testing 13 challenging video sequences taken by the drone, the results show that the algorithm has adaptability to the changes in the target scale and its robustness along with many other performance indicators are both better than the most state-of-the-art methods in illumination Variation, fast motion, motion blur and other complex situations.

This paper presents an efficient acceleration algorithm for Lloyd-type k-means clustering, which is suitable to a large-scale and high-dimensional data set with potentially numerous classes. The algorithm employs a novel projection-based filter (PRJ) to avoid unnecessary distance calculations, resulting in high-speed performance keeping the same results as a standard Lloyd's algorithm. The PRJ exploits a summable lower bound on a squared distance defined in a lower-dimensional space to which data points are projected. The summable lower bound can make the bound tighter dynamically by incremental addition of components in the lower-dimensional space within each iteration although the existing lower bounds used in other acceleration algorithms work only once as a fixed filter. Experimental results on large-scale and high-dimensional real image data sets demonstrate that the proposed algorithm works at high speed and with low memory consumption when large k values are given, compared with the state-of-the-art algorithms.

A light field, which is often understood as a set of dense multi-view images, has been utilized in various 2D/3D applications. Efficient light field acquisition using a coded aperture camera is the target problem considered in this paper. Specifically, the entire light field, which consists of many images, should be reconstructed from only a few images that are captured through different aperture patterns. In previous work, this problem has often been discussed from the context of compressed sensing (CS), where sparse representations on a pre-trained dictionary or basis are explored to reconstruct the light field. In contrast, we formulated this problem from the perspective of principal component analysis (PCA) and non-negative matrix factorization (NMF), where only a small number of basis vectors are selected in advance based on the analysis of the training dataset. From this formulation, we derived optimal non-negative aperture patterns and a straight-forward reconstruction algorithm. Even though our method is based on conventional techniques, it has proven to be more accurate and much faster than a state-of-the-art CS-based method.

Extreme learning machine (ELM) has recently attracted many researchers' interest due to its very fast learning speed, good generalization ability, and ease of implementation. However, it has a linear output layer which may limit the capability of exploring the available information, since higher-order statistics of the signals are not taken into account. To address this, we propose a novel ELM architecture in which the linear output layer is replaced by a Volterra filter structure. Additionally, the principal component analysis (PCA) technique is used to reduce the number of effective signals transmitted to the output layer. This idea not only improves the processing capability of the network, but also preserves the simplicity of the training process. Then we carry out performance evaluation and application analysis for the proposed architecture in the context of supervised classification and unsupervised equalization respectively, and the obtained results either on publicly available datasets or various channels, when compared to those produced by already proposed ELM versions and a state-of-the-art algorithm: support vector machine (SVM), highlight the adequacy and the advantages of the proposed architecture and characterize it as a promising tool to deal with signal processing tasks.

A bi-dimensional empirical mode decomposition (BEMD) is one of the powerful methods for decomposing non-linear and non-stationary signals without a prior function. It can be applied in many applications such as feature extraction, image compression, and image filtering. Although modified BEMDs are proposed in several approaches, computational cost and quality of their bi-dimensional intrinsic mode function (BIMF) still require an improvement. In this paper, an iteration-free computation method for bi-dimensional empirical mode decomposition, called iBEMD, is proposed. The locally partial correlation for principal component analysis (LPC-PCA) is a novel technique to extract BIMFs from an original signal without using extrema detection. This dramatically reduces the computation time. The LPC-PCA technique also enhances the quality of BIMFs by reducing artifacts. The experimental results, when compared with state-of-the-art methods, show that the proposed iBEMD method can achieve the faster computation of BIMF extraction and the higher quality of BIMF image. Furthermore, the iBEMD method can clearly remove an illumination component of nature scene images under illumination change, thereby improving the performance of text localization and recognition.

Nonnegative matrix factorization (NMF) is one of the most popular machine learning tools for speech enhancement. The supervised NMF-based speech enhancement is accomplished by updating iteratively with the prior knowledge of the clean speech and noise spectra bases. However, in many real-world scenarios, it is not always possible for conducting any prior training. The traditional semi-supervised NMF (SNMF) version overcomes this shortcoming while the performance degrades. In this letter, without any prior knowledge of the speech and noise, we present an improved semi-supervised NMF-based speech enhancement algorithm combining techniques of NMF and robust principal component analysis (RPCA). In this approach, fixed speech bases are obtained from the training samples chosen from public dateset offline. The noise samples used for noise bases training, instead of characterizing a priori as usual, can be obtained via RPCA algorithm on the fly. This letter also conducts a study on the assumption whether the time length of the estimated noise samples may have an effect on the performance of the algorithm. Three metrics, including PESQ, SDR and SNR are applied to evaluate the performance of the algorithms by making experiments on TIMIT with 20 noise types at various signal-to-noise ratio levels. Extensive experimental results demonstrate the superiority of the proposed algorithm over the competing speech enhancement algorithm.

In this paper, we study robust Principal Component Analysis (PCA)-based anomaly detection techniques in network traffic, which can detect traffic anomalies by projecting measured traffic data onto a normal subspace and an anomalous subspace. In a PCA-based anomaly detection, outliers, anomalies with excessively large traffic volume, may contaminate the subspaces and degrade the performance of the detector. To solve this problem, robust PCA methods have been studied. In a robust PCA-based anomaly detection scheme, outliers can be removed from the measured traffic data before constructing the subspaces. Although the robust PCA methods are promising, they incure high computational cost to obtain the optimal location vector and scatter matrix for the subspace. We propose a novel anomaly detection scheme by extending the minimum covariance determinant (MCD) estimator, a robust PCA method. The proposed scheme utilizes the daily periodicity in traffic volume and attempts to detect anomalies for every period of measured traffic. In each period, before constructing the subspace, outliers are removed from the measured traffic data by using a location vector and a scatter matrix obtained in the preceding period. We validate the proposed scheme by applying it to measured traffic data in the Abiline network. Numerical results show that the proposed scheme provides robust anomaly detection with less computational cost.

An improved multivariate wavelet denoising algorithm combined with subspace and principal component analysis is presented in this paper. The key element is deriving an optimal orthogonal matrix that can project the multivariate observation signal to a signal subspace from observation space. Univariate wavelet shrinkage operator is then applied to the projected signals channel-wise resulting in the improvement of the output SNR. Finally, principal component analysis is performed on the denoised signal in the observation space to further improve the denoising performance. Experimental results based on synthesized and real world ECG data verify the effectiveness of the proposed algorithm.

In this paper, we study the problem of noise with regard to the perfect reconstruction of non-bandlimited signals, the class of signals having a finite number of degrees of freedom per unit time. The finite rate of innovation (FRI) method provides a means of recovering a non-bandlimited signal through using of appropriate kernels. In the presence of noise, however, the reconstruction function of this scheme may become ill-conditioned. Further, the reduced sampling rates afforded by this scheme can be accompanied by increased error sensitivity. In this paper, to obtain improved noise robustness, we propose the matrix pencil (MP) method for sample signal reconstruction, which is based on principal component analysis (PCA). Through the selection of an adaptive eigenvalue, a non-bandlimited signal can be perfectly reconstructed via a stable solution of the Yule-Walker equation. The proposed method can obtain a high signal-to-noise-ratio (SNR) for the reconstruction results. Herein, the method is applied to certain non-bandlimited signals, such as a stream of Diracs and nonuniform splines. The simulation results demonstrate that the MP and PCA are more effective than the FRI method in suppressing noise. The FRI method can be used in many applications, including those related to bioimaging, radar, and ultrasound imaging.

In this letter, a novel channel impulse response (CIR)-based fingerprinting positioning method using kernel principal component analysis (KPCA) has been proposed. During the offline phase of the proposed method, a survey is performed to collect all CIRs from access points, and a fingerprint database is constructed, which has vectors including CIR and physical location. During the online phase, KPCA is first employed to solve the nonlinearity and complexity in the CIR-position dependencies and extract the principal nonlinear features in CIRs, and support vector regression is then used to adaptively learn the regress function between the KPCA components and physical locations. In addition, the iterative narrowing-scope step is further used to refine the estimation. The performance comparison shows that the proposed method outperforms the traditional received signal strength based positioning methods.

Anchor graph hashing (AGH) is a promising hashing method for nearest neighbor (NN) search. AGH realizes efficient search by generating and utilizing a small number of points that are called anchors. In this paper, we propose a method for improving AGH, which considers data distribution in a similarity space and selects suitable anchors by performing principal component analysis (PCA) in the similarity space.

In this paper, a new approach is proposed for extracting the spatio-temporal patterns from a location-based social networking system (SNS) such as Foursquare. The proposed approach consists of the following procedures. First, the spatio-temporal behaviors of users in SNS are approximated as a probabilistic distribution by using a diffusion-type formula. Since the SNS datasets generally consist of sparse check-in's of users at some time points and locations, it is difficult to investigate the spatio-temporal patterns on a wide range of time and space scales. The proposed method can estimate such wide range patterns by smoothing the sparse datasets by a diffusion-type formula. It is crucial in this method to estimate robustly the scale parameter by giving a prior generative model on check-in's of users. The robust estimation enables the method to extract appropriate patterns even in small local areas. Next, the covariance matrix among the time points is calculated from the estimated distribution. Then, the principal eigenfunctions are approximately extracted as the spatio-temporal patterns by principal component analysis (PCA). The distribution is a mixture of various patterns, some of which are regular ones with a periodic cycle and some of which are irregular ones corresponding to transient events. Though it is generally difficult to separate such complicated mixtures, the experiments on an actual Foursquare dataset showed that the proposed method can extract many plausible and interesting spatio-temporal patterns.

We propose a speaker adaptation method based on the probabilistic principal component analysis (PPCA) of acoustic models. We define a training matrix which is represented in a two-way array and decompose the training models by PPCA to construct bases. In the two-way array representation, each training model is represented as a matrix and the columns of each training matrix are treated as training vectors. We formulate the adaptation equation in the maximum a posteriori (MAP) framework using the bases and the prior.