This paper expands our previously proposed semi-blind uplink interference suppression scheme for multicell multiuser massive MIMO systems to support multi modulus signals. The original proposal applies the channel state information (CSI) aided blind adaptive array (BAA) interference suppression after the beamspace preprocessing and the decision feedback channel estimation (DFCE). BAA is based on the constant modulus algorithm (CMA) which can fully exploit the degree of freedom (DoF) of massive antenna arrays to suppress both inter-user interference (IUI) and inter-cell interference (ICI). Its effectiveness has been verified under the extensive pilot contamination constraint. Unfortunately, CMA basically works well only for constant envelope signals such as QPSK and thus the proposed scheme should be expanded to cover QAM signals for more general use. This paper proposes to apply the multi modulus algorithm (MMA) and the minimum mean square error weight derivation based on data-aided sample matrix inversion (MMSE-SMI). It can successfully realize interference suppression even with the use of multi-level envelope signals such as 16QAM with satisfactorily outage probability performance below the fifth percentile.

Due to the legal reform on the protection of personal information in US/Japan and the enforcement of the General Data Protection Regulation (GDPR) in Europe, service providers are obliged to more securely manage the sensitive data stored in their server. In order to protect this kind of data, they generally employ a cryptographic encryption scheme and secure key management schemes such as a Hardware Security Module (HSM) and Trusted Platform Module (TPM). In this paper, we take a different approach based on the space-hard cipher. The space-hard cipher has an interesting property called the space hardness. Space hardness guarantees sufficient security against the adversary who gains a part of key data, e.g., 1/4 of key data. Combined with a simple network monitoring technique, we develop a practical leakage resilient scheme Virtual Vault, which is secure against the snapshot adversary who has full access to the memory in the server for a short period. Importantly, Virtual Vault is deployable by only a low-price device for network monitoring, e.g. L2 switch, and software of space-hard ciphers and packet analyzer, while typical solutions require a dedicated hardware for secure key managements such as HSM and TPM. Thus, Virtual Vault is easily added on the existing servers which do not have such dedicated hardware.

Maximum inner product search (MIPS) problem has gained much attention in a wide range of applications. In order to overcome the curse of dimensionality in high-dimensional spaces, most of existing methods first transform the MIPS problem into another approximate nearest neighbor search (ANNS) problem and then solve it by Locality Sensitive Hashing (LSH). However, due to the error incurred by the transmission and incomprehensive search strategies, these methods suffer from low precision and have loose probability guarantees. In this paper, we propose a novel search method named Adaptive-LSH (AdaLSH) to solve MIPS problem more efficiently and more precisely. AdaLSH examines objects in the descending order of both norms and (the probably correctly estimated) cosine angles with a query object in support of LSH with extendable windows. Such extendable windows bring not only efficiency in searching but also the probability guarantee of finding exact or approximate MIP objects. AdaLSH gives a better probability guarantee of success than those in conventional algorithms, bringing less running times on various datasets compared with them. In addition, AdaLSH can even support exact MIPS with probability guarantee.

This paper presents the first attribute-based signature (ABS) scheme in which the correspondence between signers and signatures is captured in an arithmetic model of computation. Specifically, we design a fully secure, i.e., adaptively unforgeable and perfectly signer-private ABS scheme for signing policies realizable by arithmetic branching programs (ABP), which are a quite expressive model of arithmetic computations. On a more positive note, the proposed scheme places no bound on the size and input length of the supported signing policy ABP's, and at the same time, supports the use of an input attribute for an arbitrary number of times inside a signing policy ABP, i.e., the so called unbounded multi-use of attributes. The size of our public parameters is constant with respect to the sizes of the signing attribute vectors and signing policies available in the system. The construction is built in (asymmetric) bilinear groups of prime order, and its unforgeability is derived in the standard model under (asymmetric version of) the well-studied decisional linear (DLIN) assumption coupled with the existence of standard collision resistant hash functions. Due to the use of the arithmetic model as opposed to the boolean one, our ABS scheme not only excels significantly over the existing state-of-the-art constructions in terms of concrete efficiency, but also achieves improved applicability in various practical scenarios. Our principal technical contributions are (a) extending the techniques of Okamoto and Takashima [PKC 2011, PKC 2013], which were originally developed in the context of boolean span programs, to the arithmetic setting; and (b) innovating new ideas to allow unbounded multi-use of attributes inside ABP's, which themselves are of unbounded size and input length.

This paper proposes a transparent glass quartz antenna for 5G-millimeter-wave-connected vehicles and clarifies the characteristics of signal reception when the glass antennas are placed on the windows of a vehicle traveling in an urban environment. Synthetic fused quartz is a material particularly suited for millimeter-wave devices owing to its excellent low transmission loss. Realizing synthetic fused quartz devices requires accurate micromachining technology specialized for the material coupled with the material technology. This paper presents a transparent antenna comprising a thin mesh pattern on a quartz substrate for installation on a vehicle window. A comparison of distributed transparent antennas and an omnidirectional antenna shows that the relative received power of the distributed antenna system is higher than that of the omnidirectional antenna. In addition, results show that the power received is similar when using vertically and horizontally polarized antennas. The design is verified in a field test using transparent antennas on the windows of a real vehicle.

In high range resolution radar systems, the detection of range-spread target under correlated non-Gaussian clutter faces many problems. In this paper, a novel detector employing an autoregressive (AR) model is proposed to improve the detection performance. The algorithm is elaborately designed and analyzed considering the clutter characteristics. Numerical simulations and measurement data verify the effectiveness and advantages of the proposed detector for the range-spread target in spatially correlated non-Gaussian clutter.

In this paper, we propose a model of a diversity receiver which uses an antenna whose antenna pattern can periodically change. We also propose a minimum mean square error (MMSE) based interference cancellation method of the receiver which, in principle, can suffer from the interference in neighboring frequency bands. Since the antenna pattern changes according to the sum of sinusoidal waveforms with different frequencies, the received signals are received at the carrier frequency and the frequencies shifted from the carrier frequency by the frequency of the sinusoidal waveforms. The proposed diversity scheme combines the components in the frequency domain to maximize the signal-to-noise power ratio (SNR) and to maximize the diversity gain. We confirm that the bit error rate (BER) of the proposed receiver can be improved by increase in the number of arrival paths resulting in obtaining path diversity gain. We also confirm that the proposed MMSE based interference canceller works well when interference signals exist and achieves better BER performances than the conventional diversity receiver with maximum ratio combining.

Expectation propagation (EP) decoding is proposed for sparse superposition coding in orthogonal frequency division multiplexing (OFDM) systems. When a randomized discrete Fourier transform (DFT) dictionary matrix is used, the EP decoding has the same complexity as approximate message-passing (AMP) decoding, which is a low-complexity and powerful decoding algorithm for the additive white Gaussian noise (AWGN) channel. Numerical simulations show that the EP decoding achieves comparable performance to AMP decoding for the AWGN channel. For OFDM systems, on the other hand, the EP decoding is much superior to the AMP decoding while the AMP decoding has an error-floor in high signal-to-noise ratio regime.

In this paper, we propose L0 norm optimization in a scrambled sparse representation domain and its application to an Encryption-then-Compression (EtC) system. We design a random unitary transform that conserves L0 norm isometry. The resulting encryption method provides a practical orthogonal matching pursuit (OMP) algorithm that allows computation in the encrypted domain. We prove that the proposed method theoretically has exactly the same estimation performance as the nonencrypted variant of the OMP algorithm. In addition, we demonstrate the security strength of the proposed secure sparse representation when applied to the EtC system. Even if the dictionary information is leaked, the proposed scheme protects the privacy information of observed signals.

In the realization of convolutional neural networks (CNNs) in resource-constrained embedded hardware, the memory footprint of weights is one of the primary problems. Pruning techniques are often used to reduce the number of weights. However, the distribution of nonzero weights is highly skewed, which makes it more difficult to utilize the underlying parallelism. To address this problem, we present SENTEI*, filter-wise pruning with distillation, to realize hardware-aware network architecture with comparable accuracy. The filter-wise pruning eliminates weights such that each filter has the same number of nonzero weights, and retraining with distillation retains the accuracy. Further, we develop a zero-weight skipping inter-layer pipelined accelerator on an FPGA. The equalization enables inter-filter parallelism, where a processing block for a layer executes filters concurrently with straightforward architecture. Our evaluation of semantic-segmentation tasks indicates that the resulting mIoU only decreased by 0.4 points. Additionally, the speedup and power efficiency of our FPGA implementation were 33.2× and 87.9× higher than those of the mobile GPU. Therefore, our technique realizes hardware-aware network with comparable accuracy.

Nowadays recommender systems (RS) keep drawing attention from academia, and collaborative filtering (CF) is the most successful technique for building RS. To overcome the inherent limitation, which is referred to as data sparsity in CF, various solutions are proposed to incorporate additional social information into recommendation processes, such as trust networks. However, existing methods suffer from multi-source data integration (i.e., fusion of social information and ratings), which is the basis for similarity calculation of user preferences. To this end, we propose a social collaborative filtering method based on novel trust metrics. Firstly, we use Graph Convolutional Networks (GCNs) to learn the associations between social information and user ratings while considering the underlying social network structures. Secondly, we measure the direct-trust values between neighbors by representing multi-source data as user ratings on popular items, and then calculate the indirect-trust values based on trust propagations. Thirdly, we employ all trust values to create a social regularization in user-item rating matrix factorization in order to avoid overfittings. The experiments on real datasets show that our approach outperforms the other state-of-the-art methods on usage of multi-source data to alleviate data sparsity.

A spatially “Mt. Fuji” coupled (SFC) low-density parity-check (LDPC) ensemble is a modified version of the spatially coupled (SC) LDPC ensemble. Its decoding error probability in the waterfall region has been studied only in an experimental manner. In this paper, we theoretically analyze it over the binary erasure channel by modifying the expected graph evolution (EGE) and covariance evolution (CE) that have been used to analyze the original SC-LDPC ensemble. In particular, we derive the initial condition modified for the SFC-LDPC ensemble. Then, unlike the SC-LDPC ensemble, the SFC-LDPC ensemble has a local minimum on the solution of the EGE and CE. Considering the property of it, we theoretically expect the waterfall curve of the SFC-LDPC ensemble is steeper than that of the SC-LDPC ensemble. In addition, we also confirm it by numerical experiments.

This paper proposes a new and effective convolutional neural network model termed OFR-Net for optical flow refinement. The OFR-Net exploits the spatial correlation between images and optical flow fields. It adopts a pyramidal codec structure with residual connections, dense connections and skip connections within and between the encoder and decoder, to comprehensively fuse features of different scales, locally and globally. We also introduce a warp loss to restrict large displacement refinement errors. A series of experiments on the FlyingChairs and MPI Sintel datasets show that the OFR-Net can effectively refine the optical flow predicted by various methods.

We propose an ultra-low inter-core crosstalk (XT) multi-core fiber (MCF) with standard 125-μm cladding. We show the fiber design and fabrication results of an MCF housing four cores with W-shaped index profile; it offers XT of less than -67dB/km over the whole C+L band. This enables us to realize 10,000-km transmission with negligible XT penalty. We also observe a low-loss of 0.17dB/km (average) at a wavelength of 1.55μm and other optical properties compatible with ITU-T G.654.B fiber. We also elucidate its good micro-bend resistance in terms of both the loss and XT to confirm its applicability to high-density optical fiber cables. Finally, we show that the fabricated MCF is feasible along with long-distance transmission by confirming that the XT noise performance corresponds to transmission distances of 10,000km or more.

In this letter, we propose a novel robust transferable subspace learning (RTSL) method for cross-corpus facial expression recognition. In this method, on one hand, we present a novel distance metric algorithm, which jointly considers the local and global distance distribution measure, to reduce the cross-corpus mismatch. On the other hand, we design a label guidance strategy to improve the discriminate ability of subspace. Thus, the RTSL is much more robust to the cross-corpus recognition problem than traditional transfer learning methods. We conduct extensive experiments on several facial expression corpora to evaluate the recognition performance of RTSL. The results demonstrate the superiority of the proposed method over some state-of-the-art methods.

This paper proposes a deterministic pilot pattern placement optimization scheme based on the quantum genetic algorithm (QGA) which aims to improve the performance of sparse channel estimation in orthogonal frequency division multiplexing (OFDM) systems. By minimizing the mutual incoherence property (MIP) of the sensing matrix, the pilot pattern placement optimization is modeled as the solution of a combinatorial optimization problem. QGA is used to solve the optimization problem and generate optimized pilot pattern that can effectively avoid local optima traps. The simulation results demonstrate that the proposed method can generate a sensing matrix with a smaller MIP than a random search or the genetic algorithm (GA), and the optimized pilot pattern performs well for sparse channel estimation in OFDM systems.

This paper investigates the closure properties of multi-inkdot nondeterministic Turing machines with sublogarithmic space. We show that the class of sets accepted by the Turing machines is not closed under concatenation with regular set, Kleene closure, length-preserving homomorphism, and intersection.

In this paper, we propose a secure computation of sparse coding and its application to Encryption-then-Compression (EtC) systems. The proposed scheme introduces secure sparse coding that allows computation of an Orthogonal Matching Pursuit (OMP) algorithm in an encrypted domain. We prove theoretically that the proposed method estimates exactly the same sparse representations that the OMP algorithm for non-encrypted computation does. This means that there is no degradation of the sparse representation performance. Furthermore, the proposed method can control the sparsity without decoding the encrypted signals. Next, we propose an EtC system based on the secure sparse coding. The proposed secure EtC system can protect the private information of the original image contents while performing image compression. It provides the same rate-distortion performance as that of sparse coding without encryption, as demonstrated on both synthetic data and natural images.

Cross-project defect prediction (CPDP) is a research hot recently, which utilizes the data form existing source project to construct prediction model and predicts the defect-prone of software instances from target project. However, it is challenging in bridging the distribution difference between different projects. To minimize the data distribution differences between different projects and predict unlabeled target instances, we present a novel approach called selective pseudo-labeling based subspace learning (SPSL). SPSL learns a common subspace by using both labeled source instances and pseudo-labeled target instances. The accuracy of pseudo-labeling is promoted by iterative selective pseudo-labeling strategy. The pseudo-labeled instances from target project are iteratively updated by selecting the instances with high confidence from two pseudo-labeling technologies. Experiments are conducted on AEEEM dataset and the results show that SPSL is effective for CPDP.

Web service users are overwhelmed by the amount of information presented to them and have difficulties in finding the information that they need. Therefore, a recommendation system that predicts users' taste is an essential factor for the success of businesses. However, recommendation systems require users' personal information and can thus lead to serious privacy violations. To solve this problem, many research has been conducted about protecting personal information in recommendation systems and implementing differential privacy, a privacy protection technique that inserts noise into the original data. However, previous studies did not examine the following factors in applying differential privacy to recommendation systems. First, they did not consider the sparsity of user rating information. The total number of items is much more than the number of user-rated items. Therefore, a rating matrix created for users and items will be very sparse. This characteristic renders the identification of user patterns in rating matrixes difficult. Therefore, the sparsity issue should be considered in the application of differential privacy to recommendation systems. Second, previous studies focused on protecting user rating information but did not aim to protect the lists of user-rated items. Recommendation systems should protect these item lists because they also disclose user preferences. In this study, we propose a differentially private recommendation scheme that bases on a grouping method to solve the sparsity issue and to protect user-rated item lists and user rating information. The proposed technique shows better performance and privacy protection on actual movie rating data in comparison with an existing technique.