We propose an efficient hybrid automatic repeat request (HARQ) method that simultaneously achieves packet combining and resolution of the collisions of random access identifiers (RAIDs) during retransmission in a non-orthogonal multiple access (NOMA)-based random access system. Here, the RAID functions as a separator for simultaneously received packets that use the same channel in NOMA. An example of this is a scrambling code used in 4G and 5G systems. Since users independently select a RAID from the candidate set prepared by the system, the decoding of received packets fails when multiple users select the same RAID. Random RAID reselection by each user when attempting retransmission can resolve a RAID collision; however, packet combining between the previous and retransmitted packets is not possible in this case because the base station receiver does not know the relationship between the RAID of the previously transmitted packet and that of the retransmitted packet. To address this problem, we propose a HARQ method that employs novel hierarchical tree-structured RAID groups in which the RAID for the previous packet transmission has a one-to-one relationship with the set of RAIDs for retransmission. The proposed method resolves RAID collisions at retransmission by randomly reselecting for each user a RAID from the dedicated RAID set from the previous transmission. Since the relationship between the RAIDs at the previous transmission and retransmission is known at the base station, packet combining is achieved simultaneously. Computer simulation results show the effectiveness of the proposed method.

This paper proposes a novel random access identifier (RAID)-linked receiver beamforming method for time division duplex (TDD)-based random access. When the number of receiver antennas at the base station is large in a massive multiple-input multiple-output (MIMO) scenario, the channel estimation accuracy per receiver antenna at the base station receiver is degraded due to the limited received signal power per antenna from the user terminal. This results in degradation in the receiver beamforming (BF) or antenna diversity combining and active RAID detection. The purpose of the proposed method is to achieve accurate active RAID detection and channel estimation with a reasonable level of computational complexity at the base station receiver. In the proposed method, a unique receiver BF vector applied at the base station is linked to each of the M RAIDs prepared by the system. The user terminal selects an appropriate pair comprising a receiver BF vector and a RAID in advance based on the channel estimation results in the downlink assuming channel reciprocity in a TDD system. Therefore, per-receiver antenna channel estimation for receiver BF is not necessary in the proposed method. Furthermore, in order to utilize fully the knowledge of the channel at the user transmitter, we propose applying transmitter filtering (TF) to the proposed method for effective channel shortening in order to increase the orthogonal preambles for active RAID detection and channel estimation prepared for each RAID. Computer simulation results show that the proposed method greatly improves the accuracy of active RAID detection and channel estimation. This results in lower error rates than that for the conventional method performing channel estimation at each antenna in a massive MIMO environment.

This paper investigates the performance of interleave division multiple access (IDMA)-based random access with various interference canceller structures in order to support massive machine-type communications (mMTC) in the fifth generation (5G) mobile communication system. To support massive connectivity in the uplink, a grant-free and contention-based multiple access scheme is essential to reduce the control signaling overhead and transmission latency. To suppress the packet loss due to collision and to achieve multi-packet reception, non-orthogonal multiple access (NOMA) with interference cancellation at the base station receiver is essential. We use IDMA and compare various interference canceller structures such as the parallel interference canceller (PIC), successive interference canceller (SIC), and their hybrid from the viewpoints of the error rate and decoding delay time. Based on extensive computer simulations, we show that IDMA-based random access is a promising scheme for supporting mMTC and the PIC-SIC hybrid achieves a good tradeoff between the error rate and decoding delay time.

A random access scheme is a fundamental scenario in which the users transmit through a shared channel and cannot coordinate with each other. Recently, successive interference cancellation (SIC) is introduced into the random access scheme. The SIC decodes the transmitted packets using collided packets. The coded slotted ALOHA (CSA) is a random access scheme using the SIC. The CSA encodes each packet by a local code prior to transmission. It is known that the CSA achieves excellent throughput. On the other hand, it is reported that shift operation improves the decoding performance for packet-oriented erasure correcting coding systems. In this paper, we propose a protocol which applies the shift operation to the CSA. Numerical simulations show that the proposed protocol achieves better throughput and packet loss rate than the CSA. Moreover, we analyze the asymptotic behavior of the throughput and the decoding erasure rate for the proposed protocol by the density evolution.

A Brillouin optical correlation domain reflectometry (BOCDR) system, which can set measuring point to arbitrary distance that is aligned in a random order along an optical fiber (i.e., random accessibility), is proposed to measure dynamic strain and experimentally evaluated. This random-access system can allocate measurement bandwidth to measuring point by assigning the measurement times at each measuring point of the total number of strain measurements. This assigned number is not always equally but as necessary for plural objects with different natural frequencies. To verify the system, strain of two vibrating objects with different natural frequencies was measured by one optical fiber which is attached to those objects. The system allocated appropriate measurement bandwidth to each object and simultaneously measured dynamic strain corresponding to the vibrating objects.

This paper proposes a novel access technique that enables uplink multiuser multiple input multiple output (MU-MIMO) access with small overhead in distributed wireless networks. The proposed access technique introduces a probe packet that is sent to all terminals to judge whether they have the right to transmit their signals or not. The probe packet guarantees high quality MU-MIMO signal transmission when a minimum mean square error (MMSE) filter is applied at the access point, which results in high frequency utilization efficiency. Computer simulation reveals that the proposed access achieves more than twice of the capacity obtained by the traditional carrier sense multiple access/collision avoidance (CSMA/CA) with a single user MIMO, when the access point with 5 antennas is surrounded by the terminals with 2 antennas.

The IEEE 802.11 wireless local area network (WLAN) is the most widely deployed communication standard in the world. Currently, the IEEE 802.11ax draft standard is one of the most advanced and promising among future wireless network standards. However, the suggested uplink-OFDMA (UL-OFDMA) random access method, based on trigger frame-random access (TF-R) from task group ax (TGax), does not yet show satisfying system performance. To enhance the UL-OFDMA capability of the IEEE 802.11ax draft standard, we propose a centralized contention-based MAC (CC-MAC) and describe its detailed operation. In this paper, we analyze the performance of CC-MAC by solving the Markov chain model and evaluating BSS throughput compared to other methods, such as DCF and TF-R, by computer simulation. Our results show that CC-MAC is a scalable and efficient scheme for improving the system performance in a UL-OFDMA random access situation in IEEE 802.11ax.

We have studied the formation of Ti-nanodots (NDs) by remote H2 plasma (H2-RP) exposure and investigated how the embedding of Ti-NDs affects the resistive switching properties of Si-rich oxides (SiOx) because it is expected that NDs will trigger the formation of the conductive filament path in SiOx. Ti-NDs with an areal density as high as 1011 cm-2 were fabricated by exposing a Ge/Ti stacked layer to the H2-RP without external heating, and changes in the chemical structure of Ge/Ti stacked layer with the Ti-NDs formation were evaluated by using hard x-ray photoemission spectroscopy (HAXPES) and x-ray photoelectron spectroscopy (XPS). Resistive switching behaviors of SiOx with Ti-NDs were measured from current-voltage curves and compared to the results obtained from samples of SiOx with a Ti thin layer.

This paper studies the impact of integrating pricing with connection admission control (CAC) on the congestion management practices in contention-based wireless random access networks. Notably, when the network is free of charge, each self-interested user tries to occupy the channel as much as possible, resulting in the inefficient utilization of network resources. Pricing is therefore adopted as incentive mechanism to encourage users to choose their access probabilities considering the real-time network congestion level. A Stackelberg leader-follower game is formulated to analyze the competitive interaction between the service provider and the users. In particular, each user chooses the access probability that optimizes its payoff, while the self-interested service provider decides whether to admit or to reject the user's connection request in order to optimize its revenue. The stability of the Stackelberg leader-follower game in terms of convergence to the Nash equilibrium is established. The proposed CAC scheme is completely distributed and can be implemented by individual access points using only local information. Compared to the existing schemes, the proposed scheme achieves higher revenue gain, higher user payoff, and higher QoS performance.

In this paper, we introduce a distributed power allocation strategy for random access, that has the capabilities of multipacket reception (MPR) and successive interference cancellation (SIC). The proposed random access scheme is suitable for machine-to-machine (M2M) communication application in fifth-generation (5G) cellular networks. A previous study optimized the probability distribution for discrete transmission power levels, with implicit limitations on the successful decoding of at most two packets from a single collision. We formulate the optimization problem for the general case, where a base station can decode multiple packets from a single collision, and this depends only on the signal-to-interference-plus-noise ratio (SINR). We also propose a feasible suboptimal iterative per-level optimization process; we do this by introducing relationships among the different discrete power levels. Compared with the conventional power allocation scheme with MPR and SIC, our method significantly improves the system throughput; this is confirmed by computer simulations.

Ni nanodots (NDs) used as nano-scale top electrodes were formed on a 10-nm-thick Si-rich oxide (SiO$_{mathrm{x}}$)/Ni bottom electrode by exposing a 2-nm-thick Ni layer to remote H$_{2}$-plasma (H$_{2}$-RP) without external heating, and the resistance-switching behaviors of SiO$_{mathrm{x}}$ were investigated from current-voltage ( extit{I--V}) curves. Atomic force microscope (AFM) analyses confirmed the formation of electrically isolated Ni NDs as a result of surface migration and agglomeration of Ni atoms promoted by the surface recombination of H radicals. From local extit{I--V} measurements performed by contacting a single Ni ND as a top electrode with a Rh coated Si cantilever, a distinct uni-polar type resistance switching behavior was observed repeatedly despite an average contact area between the Ni ND and the SiO$_{mathrm{x}}$ as small as $sim$ 1.9 $ imes$ 10$^{-12}$cm$^{2}$. This local extit{I--V} measurement technique is quite a simple method to evaluate the size scalability of switching properties.

This paper proposes a multipacket-per-slot reservation-based random access protocol with multiuser detection (MD) and automatic repeat request (ARQ), called MPRMD, and analyzes its performance by computer simulations. In MPRMD, before data packet (DP) transmission, a user terminal (UT) transmits a small access request packet (AP) that is composed of an orthogonal preamble sequence and a UT identifier (UT-ID) in a randomly selected minislot during a short dedicated period. Even when several APs collide, a base station (BS) distinguishes them by matched filtering against the preamble part and then extracts the UT-IDs after separating each AP by MD. If the APs are not successfully detected, a small number of minislots are additionally arranged to retransmit them. Thus, by using MD under AP crowded conditions, BS can maximally detect the access requests in a short period, which results in reducing the overhead. Furthermore, in the assignment of a slot, BS intentionally assigns one slot to multiple UTs in order to enhance the efficiency and separates UT's DPs by MD. Since MPRMD can detect a multitude of access requests by utilizing MD in the short period and efficiently assign the slot to separable DPs by MD, it can enhance the system throughput. Computer simulations are conducted to demonstrate the effectiveness of MPRMD. It is shown that the maximum throughputs of MPRMD with the average SNR of 30dB reach 1.4 and 1.7 packets/slot when a data packet is 10 times and 50 times as long as a control packet, respectively.

In order to analyze an impact of threshold voltage (Vth) fluctuation induced by random telegraph noise (RTN) on LSI circuit design, we measured a 40-nm 6-Tr-SRAM TEG which enables to evaluate individual bit-line current. RTN phenomenon was successfully measured and we also identified that the transfer MOSFET in an SRAM bit-cell was the most sensitive MOSFET. The proposed word line boosting technique, which applies slightly extra stress to the transfer MOSFET, improves about 30% of detecting probability of fail-bit cells caused by RTN.

We have investigated the impact of O2 annealing after SiOx deposition on the switching behavior to gain a better understanding of the resistance switching mechanism, especially the role of oxygen deficiency in the SiOx network. Although resistive random access memories (ReRAMs) with SiOx after 300 annealing sandwiched with Pt electrodes showed uni-polar type resistance switching characteristics, the switching behaviors were barely detectable for the samples after annealing at temperatures over 500. Taking into account of the average oxygen content in the SiOx films evaluated by XPS measurements, oxygen vacancies in SiOx play an important role in resistance switching. Also, the results of conductive AFM measurements suggest that the formation and disruption of a conducting filament path are mainly responsible for the resistance switching behavior of SiOx.

This paper presents a hardware design of high throughput, low latency preamble detector for 3GPP LTE physical random access channel (PRACH) receiver. The presented PRACH receiver uses the pipelined structure to improve the throughput of power delay profile (PDP) generation which is executed multiple times during the preamble detection. In addition, to reduce detection latency, we propose an instantaneous preamble detection method for both restricted and unrestricted set. The proposed preamble detection method can detect all existing preambles directly and instantaneously from PDP output while conducting PDP combining for restricted set. The PDP combining enables the PRACH receiver to detect preambles robustly even in severe Doppler effect or frequency error exist. Using proposed method, the worst case preamble detection latency time can be less than 1 ms with 136 MHz clock and the proposed PRACH receiver can be implemented with approximately 237k equivalent ASIC gates count or occupying 30.2% of xc6vlx130t FPGA device.

We have fabricated Pt/Si-rich oxide (SiOx)/TiN stacked MIM diodes and studied an impact of the structural asymmetry on their resistive switching characteristics. XPS analyses show that a TiON interfacial layer was formed during the SiOx deposition on TiN by RF-sputtering in an Ar + O2 gas mixture. After the fabrication of Pt top electrodes on the SiOx layer, and followed by an electro-forming process, distinct bi-polar type resistive switching was confirmed. For the resistive switching from high to low resistance states so called SET process, there is no need to set the current compliance. Considering higher dielectric constant of TiON than SiOx, the interfacial TiON layer can contribute to regulate the current flow through the diode. The clockwise resistive switching, in which the reduction and oxidation (Red-Ox) reactions can occur near the TiN bottom electrode, shows lower RESET voltages and better switching endurance than the counter-clockwise switching where the Red-Ox reaction can take place near the top Pt electrode. The result implies a good repeatable nature of Red-Ox reactions at the interface between SiOx and TiON/TiN in consideration of relatively high diffusibility of oxygen atoms through Pt.

Repairing embedded memories (e-memories) on an advanced system-on-chip (SoC) product is a key technique used to improve product yield. However, increasing the die area of SoC products equipped with various types of e-memories on the die is an issue. A fuse scheme can be used to resolve this issue. However, several fuse schemes that have been proposed to decrease the die area result in an increased repair time. Therefore, in this paper, we propose a novel fuse scheme that decreases both die area and repair time. Moreover, our approach is applied to a 65 nm SoC product. The results indicate that the proposed fuse scheme effectively decreases the die area and repair time of advanced SoC products.

A new information detection method has been proposed for a very fast and efficient search engine. This method is implemented on hardware system using FPGA. We take advantages of Content Addressable Memory (CAM) which has an ability of matching mode for designing the system. The CAM blocks have been designed using available memory blocks of the FPGA device to save access times of the whole system. The entire memory can return multi-match results concurrently. The system operates based on the CAMs for pattern matching, in a parallel manner, to output multiple addresses of multi-match results. Based on the parallel multi-match operations, the system can be applied for pattern matching with various required constraint conditions without using any search principles. The very fast multi-match results are achieved at 60 ns with the operation frequency 50 MHz. This increases the search performance of the information detection system which uses this method as the core system.

We have studied resistance-switching properties of RF sputtered Si-rich oxides sandwiching with Pt electrodes. By sweeping bias to the top Pt electrode, non-polar type resistance switching was observed after a forming process. In comparison to RF sputtered TiOx case, significant small current levels were obtained in both the high resistance state (HRS) and the low resistance state (LRS). And, even with decreasing SiOx thickness down to 8 nm from 40 nm, the ON/OFF ratio in resistance-switching between HRS and LRS as large as 103 was maintained. From the analysis of current-voltage characteristics for Pt/SiOx on p-type Si(100) and n-type Si(100), it is suggested that the red-ox (REDction and OXidation) reaction induced by electron fluence near the Pt/SiOx interface is of importance for obtaining the resistance-switching behavior.

Recently, global positioning system (GPS)-enabled mobile units have been popular in wireless mobile communications systems, and thus it becomes possible for mobile units to estimate the velocity before a random access for initiating communications. Motivated by this, we propose a new random access scheme establishing two or more access slot groups corresponding to velocity ranges of mobile units, where each mobile unit attempts a random access only at the slot group corresponding to its current velocity. It gives advantages that access slots can be flexibly grouped according to vehicle traffic conditions and detection algorithms can be optimized to each velocity range.