It has been widely recognized that in compressed sensing, many restricted isometry property (RIP) conditions can be easily obtained by using the null space property (NSP) with its null space constant (NSC) 0<θ≤1 to construct a contradicted method for sparse signal recovery. However, the traditional NSP with θ=1 will lead to conservative RIP conditions. In this paper, we extend the NSP with 0<θ<1 to a scale NSP, which uses a factor τ to scale down all vectors belonged to the Null space of a sensing matrix. Following the popular proof procedure and using the scale NSP, we establish more relaxed RIP conditions with the scale factor τ, which guarantee the bounded approximation recovery of all sparse signals in the bounded noisy through the constrained l1 minimization. An application verifies the advantages of the scale factor in the number of measurements.

Wireless sensor networks provide long-term monitoring of the environment, but sensors are powered by small batteries. Using a mobile charger (MC) to replenish energy of sensors is one promising solution to prolong their usage time. Many approaches have been developed to find the MC's moving path, and they assume that sensors have a fixed sensing rate (SR) and prefer to fully charge sensors. In practice, sensors can adaptively adjust their SRs to meet application demands or save energy. Besides, due to the fully charging policy, some sensors with low energy may take long to wait for the MC's service. Thus, the paper formulates a path and charge (P&C) problem, which asks how to dispatch the MC to visit sensors with adaptive SRs and decide their charging time, such that both survivability and throughput of sensors can be maximized. Then, we propose an efficient P&C scheduling (EPCS) algorithm, which builds the shortest path to visit each sensor. To make the MC fast move to charge the sensors near death, some sensors with enough energy are excluded from the path. Moreover, EPCS adopts a floating charging mechanism based on the ratio of workable sensors and their energy depletion. Simulation results verify that EPCS can significantly improve the survivability and throughput of sensors.

With the popularity of smart devices, mobile crowdsensing, in which the crowdsensing platform gathers useful data from users of smart devices, e.g., smartphones, has become a prevalent paradigm. Various incentive mechanisms have been extensively adopted for the crowdsensing platform to incentivize users of smart devices to offer sensing data. Existing works have concentrated on rewarding smart-device users for their short term effort to provide data without considering the long-term factors of smart-device users and the quality of data. Our previous work has considered the quality of data of smart-device users by incorporating the long-term reputation of smart-device users. However, our previous work only considered a quality maximization problem with budget constraints on one location. In this paper, multiple locations are considered. Stackelberg game is utilized to solve a two-stage optimization problem. In the first stage, the crowdsensing platform allocates the budget to different locations and sets price as incentives for users to maximize the total data quality. In the second stage, the users make efforts to provide data to maximize its utility. Extensive numerical simulations are conducted to evaluate proposed algorithm.

In this paper, a reference-voltage self-selected pseudo-differential sensing scheme suitable for single-ended SRAM is proposed. The proposed sensing scheme can select different reference voltage according to the offset direction. With the employment of the new sensing scheme, the swing of the read bit-line in the read operation is reduced by 74.6% and 45.5% compared to the conventional domino and the pseudo-differential sense amplifier sensing scheme, respectively. Therefore, the delay and power consumption of the read operation are significantly improved. Simulation results based on a standard 55nm CMOS show that compared with the conventional domino and pseudo-differential sensing schemes, the sensing delay is improved by 66.4% and 47.7%, and the power consumption is improved by 31.4% and 22.5%, respectively. Although the area of the sensing scheme is increased by 50.8% compared with the pseudo-differential sense amplifier sensing scheme, it has little effect on the entire SRAM area.

Recently, multi-modal fusion methods based on remote sensing data and social sensing data have been widely used in the field of urban region function recognition. However, due to the high complexity of noise problem, most of the existing methods are not robust enough when applied in real-world scenes, which seriously affect their application value in urban planning and management. In addition, how to extract valuable periodic feature from social sensing data still needs to be further study. To this end, we propose a multi-modal fusion network guided by feature co-occurrence for urban region function recognition, which leverages the co-occurrence relationship between multi-modal features to identify abnormal noise feature, so as to guide the fusion network to suppress noise feature and focus on clean feature. Furthermore, we employ a graph convolutional network that incorporates node weighting layer and interactive update layer to effectively extract valuable periodic feature from social sensing data. Lastly, experimental results on public available datasets indicate that our proposed method yeilds promising improvements of both accuracy and robustness over several state-of-the-art methods.

This brief presents a slope analog-digital converter (ADC)-based supply voltage monitor (SVM) for biofuel-cell-powered supply-sensing systems operating in a supply voltage range of 0.18-0.35V. The proposed SVM is designed to utilize the output of energy harvester extracting power from biological reactions, realizing energy-autonomous sensor interfaces. A burst pulse generator uses a dynamic leakage suppression logic oscillator to generate a stable clock signal under the sub-threshold region for pulse counting. A slope-based voltage-to-time converter is employed to generate a pulse width proportional to the supply voltage with high linearity. The test chip of the proposed SVM is implemented in 180-nm CMOS technology with an active area of 0.018mm2. It consumes 2.1nW at 0.3V and achieves a conversion time of 117-673ms at 0.18-0.35V with a nonlinearity error of -5.5/+8.3mV, achieving an energy-efficient biosensing frontend.

We propose a sampling method that incorporates a normally distributed sampling series for EEG measurements using compressed sensing. We confirmed that the ADC sampling count and amount of wirelessly transmitted data can be reduced by 11% while maintaining a reconstruction accuracy similar to that of the conventional method.

A light field (LF), which is represented as a set of dense, multi-view images, has been used in various 3D applications. To make LF acquisition more efficient, researchers have investigated compressive sensing methods by incorporating certain coding functionalities into a camera. In this paper, we focus on a challenging case called snapshot compressive LF imaging, in which an entire LF is reconstructed from only a single acquired image. To embed a large amount of LF information in a single image, we consider two promising methods based on rapid optical control during a single exposure: time-multiplexed coded aperture (TMCA) and coded focal stack (CFS), which were proposed individually in previous works. Both TMCA and CFS can be interpreted in a unified manner as extensions of the coded aperture (CA) and focal stack (FS) methods, respectively. By developing a unified algorithm pipeline for TMCA and CFS, based on deep neural networks, we evaluated their performance with respect to other possible imaging methods. We found that both TMCA and CFS can achieve better reconstruction quality than the other snapshot methods, and they also perform reasonably well compared to methods using multiple acquired images. To our knowledge, we are the first to present an overall discussion of TMCA and CFS and to compare and validate their effectiveness in the context of compressive LF imaging.

Crowdedness of buses is playing an increasingly important role in the disease control of COVID-19. The lack of a practical approach to sensing the crowdedness of buses is a major problem. This paper proposes a bus crowdedness sensing system which exploits deep learning-based object detection to count the numbers of passengers getting on and off a bus and thus estimate the crowdedness of buses in real time. In our prototype system, we combine YOLOv5s object detection model with Kalman Filter object tracking algorithm to implement a sensing algorithm running on a Jetson nano-based vehicular device mounted on a bus. By using the driving recorder video data taken from real bus, we experimentally evaluate the performance of the proposed sensing system to verify that our proposed system system improves counting accuracy and achieves real-time processing at the Jetson Nano platform.

The application of compressed sensing (CS) theory to non-orthogonal multiple access (NOMA) systems has been investigated recently. As described in this paper, we propose a quality-of-service (QoS)-aware, low-complexity, CS-based user selection and power allocation scheme with adaptive resource block selection for downlink NOMA systems, where the tolerable interference threshold is designed mathematically to achieve a given QoS requirement by being relaxed to a constrained l1 norm optimization problem. The proposed scheme adopts two adaptive resource block (RB) selection algorithms that assign proper RB to user pairs, i.e. max-min channel assignment and two-step opportunistic channel assignment. Simulation results show that the proposed scheme is more effective at improving the user rate than other reference schemes while reducing the required complexity. The QoS requirement is approximately satisfied as long as the required QoS value is feasible.

This brief proposes a solar-cell-assisted wireless biosensing system that operates using a biofuel cell (BFC). To facilitate BFC area reduction for the use of this system in area-constrained continuous glucose monitoring contact lenses, an energy harvester combined with an on-chip solar cell is introduced as a dedicated power source for the transmitter. A dual-oscillator-based supply voltage monitor is employed to convert the BFC output into digital codes. From measurements of the test chip fabricated in 65-nm CMOS technology, the proposed system can achieve 99% BFC area reduction.

As known to us all, L-shaped co-prime array (LCA) is a recently introduced two-dimensional (2-D) sparse array structure, which is extended from linear co-prime array (CA). Such sparse array geometry can be used for 2-D parameters estimation with higher degrees-of-freedom (DOF). However, in the scenario where several narrowband transmissions spread over a wide spectrum, existing technique based on LCA with Nyquist sampling may encounter a bottleneck for both analog and digital processing. To alleviate the burden of high-rate Nyquist sampling, a method of joint wideband spectrum and direction-of-arrival (DOA) estimation with compressed sampling based on LCA, which is recognized as LCA-based modulated wideband converter (MWC), is presented in this work. First, the received signal along each antenna is mixed to basebands, low-pass filtered and down-sampled to get the compressed sampling data. Then by constructing the virtual received data of 2-D difference coarray, we estimate the wideband spectrum and DOA jointly using two recovery methods where the first is a joint ESPRIT method and the other is a joint CS method. Numerical simulations illustrate the validity of the proposed LCA based MWC system and show the superiority.

Reducing the power consumption of capsule endoscopy is essential for its further development. We introduce K-SVD dictionary learning to design a dictionary for sparse coding, and improve reconstruction accuracy of capsule endoscopic images captured using compressed sensing. At a compression ratio of 20%, the proposed method improves image quality by approximately 4.4 dB for the peak signal-to-noise ratio.

In the user identification (UI) scheme for a multiple-access fading channel based on a randomly generated (0, 1, -1)-signature code, previous studies used the signature code over a noisy multiple-access adder channel, and only the user state information (USI) was decoded by the signature decoder. However, by considering the communication model as a compressed sensing process, it is possible to estimate the channel coefficients while identifying users. In this study, to improve the efficiency of the decoding process, we propose an iterative deep neural network (DNN)-based decoder. Simulation results show that for the randomly generated (0, 1, -1)-signature code, the proposed DNN-based decoder requires less computing time than the classical signal recovery algorithm used in compressed sensing while achieving higher UI and channel estimation (CE) accuracies.

A mobile crowdsensing system (MCS) utilizes a crowd of users to collect large-scale data using their mobile devices efficiently. The collected data are usually linked with sensitive information, raising the concerns of user privacy leakage. To date, many approaches have been proposed to protect the users' privacy, with the majority relying on a centralized structure, which poses though attack and intrusion vulnerability. Some studies build a distributed platform exploiting a blockchain-type solution, which still requires a fully trusted third party (TTP) to manage a reliable reward distribution in the MCS. Spurred by the deficiencies of current methods, we propose a distributed user privacy protection structure that combines blockchain and a trusted execution environment (TEE). The proposed architecture successfully manages the users' privacy protection and an accurate reward distribution without requiring a TTP. This is because the encryption algorithms ensure data confidentiality and uncouple the correlation between the users' identity and the sensitive information in the collected data. Accordingly, the smart contract signature is used to manage the user deposit and verify the data. Extensive comparative experiments verify the efficiency and effectiveness of the proposed combined blockchain and TEE scheme.

Expectation propagation (EP) is a powerful algorithm for signal recovery in compressed sensing. This letter proposes correction of a variance message before denoising to improve the performance of EP in the high signal-to-noise ratio (SNR) regime for finite-sized systems. The variance massage is replaced by an observation-dependent consistent estimator of the mean-square error in estimation before denoising. Massive multiple-input multiple-output (MIMO) is considered to verify the effectiveness of the proposed correction. Numerical simulations show that the proposed variance correction improves the high SNR performance of EP for massive MIMO with a few hundred transmit and receive antennas.

We propose a spectrum regeneration and demodulation method for multiple direct RF undersampled real signals by using a new algorithm. Many methods have been proposed to regenerate the RF spectrum by using undersampling because of its simple circuit architecture. However, it is difficult to regenerate the spectrum from a real signal that has a band wider than a half of the sampling frequency, because it is difficult to include complex conjugate relation of the folded spectrum into the linear algebraic equation in this case. We propose a new spectrum regeneration method from direct undersampled real signals that uses multiple clocks and an extended algorithm considering the complex conjugate relation. Simulations are used to verify the potential of this method. The validity of the proposed method is verified by using the simulation data and the measured data. We also apply this algorithm to the demodulation system.

Cognitive radio provides a feasible solution for alleviating the lack of spectrum resources by enabling secondary users to access the unused spectrum dynamically. Spectrum sensing and learning, as the fundamental function for dynamic spectrum sharing in 5G evolution and 6G wireless systems, have been research hotspots worldwide. This paper reviews classic narrowband and wideband spectrum sensing and learning algorithms. The sub-sampling framework and recovery algorithms based on compressed sensing theory and their hardware implementation are discussed under the trend of high channel bandwidth and large capacity to be deployed in 5G evolution and 6G communication systems. This paper also investigates and summarizes the recent progress in machine learning for spectrum sensing technology.

Recently, broadband wireless communication has been significantly enhanced; thus, frequency spectrum scarcity has become an extremely serious problem. Spatial frequency reuse based on spectrum databases has attracted significant attention. The spectrum database collects wireless environment information, such as the radio signal strength indicator (RSSI), estimates the propagation coefficient for the propagation loss and shadow effect, and finds a vacant area where the secondary system uses the frequency spectrum without harmful interference to the primary system. Wireless sensor networks are required to collect the RSSI from a radio environmental monitor. However, a large number of RSSI values should be gathered because numerous sensors are spread over the wireless environment. In this study, a data compression technique based on spatial features, such as buildings and houses, is proposed. Using computer simulation and experimental evaluation, we confirm that the proposed compression method successfully reduces the size of the RSSI and restores the original RSSI in the recovery process.

This letter reports on the effectiveness of applying the K-singular value decomposition (SVD) dictionary learning to the electroencephalogram (EEG) compressed sensing framework with outlier detection and independent component analysis. Using the K-SVD dictionary matrix with our design parameter optimization, for example, at compression ratio of four, we improved the normalized mean square error value by 31.4% compared with that of the discrete cosine transform dictionary for CHB-MIT Scalp EEG Database.