In order to improve tracking, interference and multipath mitigation performance from that possible with existing signals, a new Global Navigation Satellite System (GNSS) signal is needed that can offer additional degrees of freedom for shaping its pulse waveform and spectrum. In this paper, a new modulation scheme called Quinary Offset Carrier modulation (QOC) is proposed as a new GNSS signal design. The pulse waveforms of QOC modulation are divided into two types: convex and concave waveforms. QOC modulations can be easily constructed by selecting different modulation parameters. The spectra and autocorrelation characteristics of QOC modulations are investigated and discussed. Simulations and analyses show that QOC modulation can achieve similar performance to traditional BOC modulation in terms of code tracking, anti-multipath, and compatibility. QOC modulation can provide a new option for satellite navigation signal design.

A new pixel design and driving method for active matrix organic light emitting diode (AMOLED) displays that use low-temperature polycrystalline silicon thin-film transistors (LTPS-TFTs) with a voltage programming method are proposed and verified using the SPICE simulator. We had employed an appropriate TFT model in SPICE simulation to demonstrate the performance of the pixel circuit. The OLED anode voltage variation error rates are below 0.35% under driving TFT threshold voltage deviation (Δ Vth = 0.33 V). The OLED current non-uniformity caused by the OLED threshold voltage degradation (Δ VTO = +0.33 V) is significantly reduced (below 6%). The simulation results show that the pixel design can improve the display image non-uniformity by compensating for the threshold voltage deviation in the driving TFT and the OLED threshold voltage degradation at the same time.

To tackle the distributed power optimization problems in wireless sensor networks localization systems, we model the problem as a hierarchical game, i.e. a multi-leader multi-follower Stackelberg game. Existing researches focus on the power allocation of anchor nodes for ranging signals or the power management of agent nodes for cooperative localization, individually. However, the power optimizations for different nodes are indiscerptible due to the common objective of localization accuracy. So it is a new challenging task when the power allocation strategies are considered for anchor and agent nodes simultaneously. To cope with this problem, a hierarchical game is proposed where anchor nodes are modeled as leaders and agent nodes are modeled as followers. Then, we prove that games of leaders and followers are both potential games, which guarantees the Nash equilibrium (NE) of each game. Moreover, the existence of Stackelberg equilibrium (SE) is proved and achieved by the best response dynamics. Simulation results demonstrate that the proposed algorithm can have better localization accuracy compared with the decomposed algorithm and uniform strategy.

Mobile virtual network operators (MVNOs) are mobile operators without their own infrastructure or government issued spectrum licenses. They purchase spectrum resources from primary mobile network operators (MNOs) to provide communication services under their own brands. MVNOs are expected to play an important role in mobile network markets, as this will increase the competition in retail markets and help to meet the demand of niche markets. However, with the rapidly increasing demand of mobile data traffic, efficient utilization of the limited spectrum resources owned by MVNOs has become an important issue. We propose here a resource sharing mechanism between MVNOs against the background of network functions virtualization (NFV). The proposed mechanism enables MVNOs to improve their quality of service (QoS) by sharing spectrum resources with each other. A nash bargaining solution based decision strategy is also devised to ensure the fairness of resource sharing. Extensive numerical evaluation results validate the effectiveness of the proposed models and mechanisms.

This paper presents an ultra-wideband amplifier embedded with band-pass filter design. The scattering parameters of a frequency-domain GaAs field effect transistor are converted into z-domain representations by employing the weighted linear least squares method. A least squares scheme is employed to obtain characteristic impedances of transmission line elements that form the amplifier having a flat gain in the passband and good fall-off selectivity in the stopband. Experimental results illustrate the validity of the proposed design method.

Hardware Trojan (HT) has emerged as an impending security threat to hardware systems. However, conventional functional tests fail to detect HT since Trojans are triggered by rare events. Most of the existing side-channel based HT detection techniques just simply compare and analyze circuit's parameters and offer no signal calibration or error correction properties, so they suffer from the challenge and interference of large process variations (PV) and noises in modern nanotechnology which can completely mask Trojan's contribution to the circuit. This paper presents a novel HT detection method based on subspace technique which can detect tiny HT characteristics under large PV and noises. First, we formulate the HT detection problem as a weak signal detection problem, and then we model it as a feature extraction model. After that, we propose a novel subspace HT detection technique based on time domain constrained estimator. It is proved that we can distinguish the weak HT from variations and noises through particular subspace projections and reconstructed clean signal analysis. The reconstructed clean signal of the proposed algorithm can also be used for accurate parameter estimation of circuits, e.g. power estimation. The proposed technique is a general method for related HT detection schemes to eliminate noises and PV. Both simulations on benchmarks and hardware implementation validations on FPGA boards show the effectiveness and high sensitivity of the new HT detection technique.

With the development of COMPASS system, finding suitable and efficient multiplexing solutions have become important for the system signal design. In this paper, based on the alternative BOC (AltBOC) modulation technique, the multiplexing scheme for COMPASS Phase II B1 signals is proposed. Then, to combine all COMPASS Phase III (CP III) B1 components into a composite signal with constant envelope, the generalized majority voting (GMV) technique is employed based on the characteristics of CP III B1 signals. The proposed multiplexing schemes also provide potential opportunities for GNSS modernization and construction, such as GPS, Galileo, etc.

Established in self-organized mode between mobile terminals (MT), mobile Ad Hoc networks are characterized by a fast change of network topology, limited power dissipation of network node, limited network bandwidth and poor security of the network. Therefore, this paper proposes an efficient one round certificateless authenticated group key agreement (OR-CLAGKA) protocol to satisfy the security demand of mobile Ad Hoc networks. Based on elliptic curve public key cryptography (ECC), OR-CLAGKA protocol utilizes the assumption of elliptic curve discrete logarithm problems (ECDLP) to guarantee its security. In contrast with those certificateless authenticated group key agreement (GKA) protocols, OR-CLAGKA protocol can reduce protocol data interaction between group users and it is based on efficient ECC public key infrastructure without calculating bilinear pairings, which involves negligible computational overhead. Thus, it is particularly suitable to deploy OR-CLAGKA protocol on MT devices because of its limited computation capacity and power consumption. Also, under the premise of keeping the forward and backward security, OR-CLAGKA protocol has achieved appropriate optimization to improve the performance of Ad Hoc networks in terms of frequent communication interrupt and reconnection. In addition, it has reduced executive overheads of key agreement protocol to make the protocol more suitable for mobile Ad Hoc network applications.

To guarantee QoS for multicast transmission, admission control for multicast sessions is expected. Probe-based multicast admission control (PBMAC) scheme is a scalable and simple approach. However, PBMAC suffers from the subsequent request problem which can significantly reduce the maximum number of multicast sessions that a network can admit. In this letter, we describe the subsequent request problem and propose an enhanced PBMAC scheme to solve this problem. The enhanced scheme makes use of complementary probing and remarking which require only minor modification to the original scheme. By using a fluid-based analytical model, we are able to prove that the enhanced scheme can always admit a higher number of multicast sessions. Furthermore, we present validation of the analytical model using packet based simulation.

In this paper, we present an approach for 3D face recognition based on Multi-level Partition of Unity (MPU) Implicits under pose and expression variations. The MPU Implicits are used for reconstructing 3D face surface in a hierarchical way. Three landmarks, nose, left eyehole and right eyehole, can be automatically detected with the analysis of curvature features at lower levels of reconstruted face. Thus, the 3D faces are initially registered to a common coordinate system based on the three landmarks. A variant of Iterative Closest Point (ICP) algorithm is proposed for matching the point surface of a given probe face to the implicits face surface in the gallery. To evaluate the performance of our approach for 3D face recognition, we perform an experiment on GavabDB face database. The results of the experiment show that our method based on MPU Implicits and Adaptive ICP has great capability for 3D face recognition under pose and expression variations.

The rapid development of information techniques has lead to more and more high-dimensional datasets, making classification more difficult. However, not all of the features are useful for classification, and some of these features may even cause low classification accuracy. Feature selection is a useful technique, which aims to reduce the dimensionality of datasets, for solving classification problems. In this paper, we propose a modified bat algorithm (BA) for feature selection, called MBAFS, using a SVM. Some mechanisms are designed for avoiding the premature convergence. On the one hand, in order to maintain the diversity of bats, they are guided by the combination of a random bat and the global best bat. On the other hand, to enhance the ability of escaping from local optimization, MBAFS employs one mutation mechanism while the algorithm trapped into local optima. Furthermore, the performance of MBAFS was tested on twelve benchmark datasets, and was compared with other BA based algorithms and some well-known BPSO based algorithms. Experimental results indicated that the proposed algorithm outperforms than other methods. Also, the comparison details showed that MBAFS is competitive in terms of computational time.

Event-centered information integration is regarded as one of the most pressing issues in improving disaster emergency management. Ontology plays an increasingly important role in emergency information integration, and provides the possibility for emergency reasoning. However, the development of event ontology for disaster emergency is a laborious and difficult task due to the increasingly scale and complexity of emergencies. Ontology pattern is a modeling solution to solve the recurrent ontology design problem, which can improve the efficiency of ontology development by reusing patterns. By study on characteristics of numerous emergencies, this paper proposes a generic ontology pattern for emergency system modeling. Based on the emergency ontology pattern, a set of reasoning rules for emergency-evolution, emergency-solution and emergency-resource utilization reasoning were proposed to conduct emergency knowledge reasoning and q.

Depth image based rendering (DIBR), which is utilized to render virtual views with a color image and the corresponding depth map, is one of the key procedures in the 2D to 3D conversion process. However, some troubling problems, such as depth edge misalignment, disocclusion occurrences and cracks at resampling, still exist in current DIBR systems. To solve these problems, in this paper, we present a robust depth image based rendering scheme for stereoscopic view synthesis. The cores of the proposed scheme are two depth map filters which share a common domain transform based filtering framework. As a first step, a filter of this framework is carried out to realize texture-depth boundary alignments and directional disocclusion reduction smoothing simultaneously. Then after depth map 3D warping, another adaptive filter is used on the warped depth maps with delivered scene gradient structures to further diminish the remaining cracks and noises. Finally, with the optimized depth map of the virtual view, backward texture warping is adopted to retrieve the final texture virtual view. The proposed scheme enables to yield visually satisfactory results for high quality 2D to 3D conversion. Experimental results demonstrate the excellent performances of the proposed approach.

Dual-rotor machine (DRM) is a multiple input and output electromechanical device with two electrical and two mechanical ports which make it an optimal transmission system for hybrid electric vehicles. In attempt to boost its performance and efficiency, this work presents a dual-rotor permanent magnet (DR-PM) machine system used for continuously variable transmission (CVT) in HEVs. The proposed DR-PM machine is analyzed, and modeled in consideration of vehicle driving requirements. Considering energy conversion modes and torque transfer modes, operation conditions of the DR-PM machine system used for CVT are illustrated in detail. Integrated control model of the system is carried out, besides, intelligent speed ratio control strategy is designed by analyzing the dynamic coupling modes upon the integrated models to satisfy the performance requirements, reasonable energy-split between machine and engine, and optimal fuel economy. Experimental results confirm the validity of the mathematical model of the DR-PM machine system in the application of CVT, and the effectiveness of the intelligent speed ratio control strategy.

Network life time and hence device life time is one of the fundamental metrics in wireless body area networks (WBAN). To prolong it, especially those of implanted sensors, each node must conserve its energy as much as possible. While a variety of wake-up/sleep mechanisms have been proposed, the wake-up radio potentially serves as a vehicle to introduce vulnerabilities and attacks to WBAN, eventually resulting in its malfunctions. In this paper, we propose a novel secure wake-up scheme, in which a wake-up authentication code (WAC) is employed to ensure that a BAN Node (BN) is woken up by the correct BAN Network Controller (BNC) rather than unintended users or malicious attackers. The scheme is thus particularly implemented by a two-radio architecture. We show that our scheme provides higher security while consuming less energy than the existing schemes.

Positioning information plays a significant role in multi-unmanned aerial vehicles (UAVs) applications. Traditionally, the positioning information is widely provided by Global Navigation Satellite System (GNSS) due to its good performance and global coverage. However, owing to complicated flight environment or signal blockage, jamming and unintentional interference, the UAVs may fail to locate themselves by using GNSS alone. As a new method to resolve these problems, cooperative positioning, by incorporating peer-to-peer range measurements and assisted information, has attracted more and more attentions due to its ability to enhance the accuracy and availability of positioning. However, achieving good performance of cooperative positioning of multi-UAVs is challenging as their mobility, arbitrary nonlinear state-evolution, measurement models and limited computation and communication resources. In this paper, we present a factor graph (FG) representation and message passing methodology to solve cooperative positioning problem among UAVs in 3-dimensional environment where GNSS cannot provide services. Moreover, to deal with the nonlinear state-evolution and measurement models while decreasing the computation complexity and communication cost, we develop a distributed algorithm for dynamic and hybrid UAVs by means of Spherical-Radial Cubature Rules (CR) method with belief propagation (BP) and variational message passing (VMP) methods (CRBP-VMP) on the FG. The proposed CRBP deals with the highly non-linear state-evolution models and non-Gaussian distributions, the VMP method is employed for ranging message, gets the simpler message representation and can reduce communication cost in the joint estimation problem. Simulation results demonstrate that the higher positioning accuracy, the better convergence as well as low computational complexity and communication cost of the proposed CRBP-VMP algorithm, which can be achieved compared with sum-product algorithm over a wireless network (SPAWN) and traditional Cubature Kalman Filters (CKF) method.

The conventional semi-orthogonal user pairing algorithm in uplink virtual MIMO systems can be used to improve the total system throughput but it usually fails to maintain good throughput performance for users experiencing relatively poor channel conditions. A novel user paring algorithm is presented in this paper to solve this fairness issue. Based on our analysis of the MMSE receiver, a new criterion called “inverse selection” is proposed for use in conjunction with the semi-orthogonal user selection. Simulation results show that the proposed algorithm can significantly improve the throughput of users with poor channel condition at only a small reduction of the overall throughput.

The recently proposed distributed adaptive direct position determination (D-ADPD) algorithm provides an efficient way to locating a radio emitter using a sensor network. However, this algorithm may be suboptimal in the situation of colored emitted signals. We propose an enhanced distributed adaptive direct position determination (EDA-DPD) algorithm. Simulations validate that the proposed EDA-DPD outperforms the D-ADPD in colored emitted signals scenarios and has the similar performance with the D-ADPD in white emitted signal scenarios.

The mobile cloud computing (MCC) paradigm is aimed at integrating mobile devices with cloud computing. In the client-server architecture of MCC, mobile devices offload tasks to the cloud to utilize the computation and storage resources of data centers. However, due to the rapid increase in the traffic demand and complexity of mobile applications, service providers have to continuously upgrade their infrastructures at great expense. At the same time, modern mobile devices have greater resources (communication, computation, and sensing), and these resources are not always fully utilized by device users. Therefore, mobile devices, from time to time, encounter other devices that could provide resources to them. Because the amount of such resources has increased with the number of mobile devices, researchers have begun to consider making use of these resources, located at the “edge” of mobile networks, to increase the scalability of future information networks. This has led to a cooperation based architecture of MCC. This paper reports the concept and design of an resource sharing mechanism that utilize resources in mobile devices through opportunistic contacts between them. Theoretical models and formal definitions of problems are presented. The efficiency of the proposed mechanism is validated through formal proofs and extensive simulation.

Many studies have reported that the single-event transient (SET) width increases with temperature. However, the mechanism for this temperature dependency is not clear, especially for an N-hit SET. In this study, TCAD simulations are carried out to study the temperature dependence of N-hit SETs in detail. Several possible factors are examined, and the results show that the temperature dependence in bulk devices is due to the decrease in the carrier mobility with temperature in both the struck NMOS and the pull-up PMOS. In contrast, the temperature dependence in SOI devices is due to the decrease in the diffusion constant and carrier lifetime with temperature, which enhances the parasitic bipolar effect.