We estimated the dependence of the perceived depth on luminance ratio by increasing the distance between the front and rear planes of a depth-fused 3-D (DFD) display. When the distance is great, the perceived depth has the tendency of nonlinear dependence on luminance ratio, which is very different from the almost linear dependence in a short-distance conventional DFD display. In a long-distance DFD display, the perceived depth is split to near the front plane at 0-40% of the rear luminance, near the rear plane at 70-100%, and the midpoint of the front and rear planes at 40-60%. Thus, the luminance-ratio dependence of perceived depth changes widely with the distance.

We present transmission- and reflection-type measurement methods for the differential mode delay (DMD) of a multimode optical fiber (MMF) optimized for high-speed local area networks (LANs) for the 850-nm band. Compared with a previously reported transmission-type measurement method for the 1550-nm wavelength band, we demonstrate here high-resolution DMD measurement methods for MMFs in the 850-nm band. As the method is based on a Fourier-domain intermodal interference technique, the measurement sensitivity is ∼60-dB, and it requires a fiber only a few meters in length. The shorter wavelength also allows a threefold improvement in the measurement resolution. The reflection-type measurement technique is a more practical than the transmission-type measurement technique for the field testing of short MMFs already installed in networks. We believe that this method will be a practical tool not only for field testing of short-length MMFs already installed in networks but also for the development of new plastic optical fibers (POFs).

Battery life and outdoor visibility are two of the most important features for mobile applications today. It is desirable to achieve both low power consumption and excellent outdoor visibility on the display device at the same time. We have previously reported a new RGBW method to realize low power consumption and high luminance with high image quality. In this paper, the basic concept of a new RGBW calculation utilizing an “Extended HSV color space” model is described, and also its performance, such as low power consumption, color image reproducibility and outdoor visibility is presented. The new method focuses on the luminance-increase ratio by means of a White signal for the display image data, and derives the appropriate RGBW signal and backlight PWM signal for every frame period. This dynamically controlled system solves the problems of conventional RGBW systems, and realizes the same image quality as a corresponding RGB display. In order to quantify its color image reproducibility, a spectroscopic measurement has been completed using the Macbeth Color Chart. In addition, the advantages of high luminance by the new RGBW method is described. The converted tone curve with an RGBW method provides very high luminance, such as 1,000cd/m2, and improved outdoor visibility. Finally, a newly developed 4.38-inch full-HD (1,080 × 1,920) 503ppi prototype LCD utilizing this new RGBW technology is described.

In this paper, penetration phenomenon of an early-time (E1) high altitude electromagnetic pulse (HEMP) into dispersive underground multilayer structures is analyzed using electromagnetic modeling of wave propagation in frequency dependent lossy media. The electromagnetic pulse is dealt with in the power spectrum ranging from 100kHz to the 100MHz band, considering the fact that the power spectrum of the E1 HEMP rapidly decreases 30dB below its maximum value beyond the 100MHz band. In addition, the propagation channel consisting of several dielectric materials is modeled with the dispersive relative permittivity of each medium. Based on source and channel models, the propagation phenomenon is analyzed in the frequency and time domains. The attenuation levels at a 100m underground point are observed to be about 15 and 20dB at 100kHz and 1MHz, respectively, and the peak level of the penetrating electric field is found 5.6kV/m. To ensure the causality of the result, we utilize the Hilbert transform.

The number of users of video on demand (VoD) services has increased dramatically. In VoD services, the demand for content items changes greatly hour to hour. Because service providers are required to maintain a stable service during peak hours, they need to design system resources based on the demand at peak time, so reducing the server load at this time is important. Although multicast delivery, in which multiple users requesting the same content item are supported by one delivery session, is effective for suppressing the server load during peak hours, user response times can increase greatly. A peer-to-peer-assisted delivery system, in which users download content items from other users watching the same content item, is also effective for reducing server load. However, system performance depends on selfish user behavior, and optimizing the usage of system resources is difficult. Moreover, complex operation, i.e., switching the delivery multicast tree or source peers, is necessary to support video cassette recorder (VCR) operation, e.g., fast forward, rewind, and pause. In this paper, we propose to reduce server load without increasing user response time by multicasting popular content items to all users independent of actual requests as well as providing on-demand unicast delivery. Through a numerical evaluation that uses actual VoD access log data, we clarify the effectiveness of the proposed method.

Application-level routing that chooses an end-to-end traffic route that relays other end hosts can improve user-perceived performance metrics such as end-to-end latency and available bandwidth. However, selfish route selection performed by each end user can lead to a decrease in path performance due to overload by route overlaps, as well as an increase in the inter-ISP transit cost as a result of utilizing more transit links compared with native IP routing. In this paper, we first strictly define an optimization problem for selecting application-level traffic routes with the aim of maximizing end-to-end network performance under a transit cost constraint. We then propose an application-level traffic routing method based on distributed simulated annealing to obtain good solutions to the problem. We evaluate the performance of the proposed method by assuming that PlanetLab nodes utilize application-level traffic routing. We show that the proposed routing method can result in considerable improvement of network performance without increasing transit cost. In particular, when using end-to-end latency as a routing metric, the number of overloaded end-to-end paths can be reduced by about 65%, as compared with that when using non-coordinated methods. We also demonstrate that the proposed method can react to dynamic changes in traffic demand and select appropriate routes.

The Internet is composed of many distinct networks, operated by independent Internet Service Providers (ISPs). The traffic and economic relationships of ISPs are mainly decided by their routing policies. However, in today's Internet, overlay routing, which changes traffic routing at the application layer, is rapidly increasing and this challenges the validity of ISPs' existing agreements. We study here the economic implications of overlay routing for ISPs, using an ISP interconnection business model based on a simple network. We then study the overlay traffic patterns in the network under various conditions. Combining the business model and traffic patterns, we study the ISPs' cost reductions with Bill-and-Keep peering and paid peering. We also discuss the ISPs' incentive to upgrade the network under each peering strategy.

Recently, the number of users downloading video content on the Internet has dramatically increased, and it is highly anticipated that downloading huge size, rich content such as movie files will become a popular use of the Internet in the near future. The transmission bandwidth consumed by delivering rich content is enormous, so it is urgent for ISPs to design an efficient delivery system that minimizes the amount of network resources consumed. To deliver web content efficiently, a content delivery network (CDN) is often used. CDN providers collocate a huge number of servers within multiple ISPs without being informed of detailed network information, i.e., network topologies, from ISPs. Minimizing the amount of network resources consumed is difficult because a CDN provider selects a server for each request based on only rough estimates of response time. Therefore, an ordinary CDN is not suited for delivering rich content. P2P-based delivery systems are becoming popular as scalable delivery systems. However, by using a P2P-based system, we still cannot obtain the ideal delivery pattern that is optimal for ISPs because the server locations depend on users behaving selfishly. To provide rich content to users economically and efficiently, an ISP itself should optimally provide servers with huge storage capacities at a limited number of locations within its network. In this paper, we investigate the content deployment method, the content delivery process, and the server allocation method that are desirable for this ISP-operated CDN. Moreover, we evaluate the effectiveness of the ISP-operated CDN using the actual network topologies of commercial ISPs.

In this paper, a novel interference suppression technique from added RoF (Radio-on-Fiber) system is proposed. In general RoF system, received RF (radio frequency) signal intensity is periodically varied depending on chromatic dispersion that is known as fading phenomenon. In proposed technique null points of this fading phenomenon are intentionally applied to minimize signal interferences. This technique can realize two types of multiplexing RoF signal. In the first configuration, a single optical carrier is modulated twice using two optical modulators connected in series. In second configuration, new RoF signal is added to the existing network using individual light source. Multiplexing RoF signals of 10 GHz-band with data of 30 Mbps 64QAM is experimentally demonstrated.

Overlay routing is an application-level routing mechanism on overlay networks. Previous researches have revealed that the overlay routing can improve user-perceived performance. However, it may also generate traffic unintended by ISPs, incurring additional monetary cost. In addition, since ISPs and end users have their own objectives respectively regarding traffic routing, overlay routing must be operated considering both standpoints. In the present paper, we propose a method to reduce inter-ISP transit costs caused by overlay routing from the both standpoints of ISPs and end users. To determine the relationships among ASes, which are required for ISP cost-aware routing, we construct a method to estimate a transit cost of overlay-routed paths from end-to-end network performance values. Utilizing the metric, we propose a novel method that controls overlay routing from the both standpoints of ISPs and end users. Through extensive evaluations using measurement results from the actual network environments, we confirm that the advantage of the proposed method whereby we can reduce the transit cost in the overlay routing and can control the overlay routing according to the objectives of both ISPs and end users.

Multihoming is widely used by Internet service providers (ISPs) to obtain improved performance and reliability when connecting to the Internet. Recently, the use of overlay routing for network application traffic is rapidly increasing. As a source of both routing oscillation and cost increases, overlay routing is known to bring challenges to ISPs. In this paper, we study the interaction between overlay routing and a multihomed ISP's routing strategy with a Nash game model, and propose a routing strategy for the multihomed ISP to alleviate the negative impact of overlay traffic. We prove that with the proposed routing strategy, the network routing game can always converge to a stable state, and the ISP can reduce costs to a relatively low level. From numerical simulations, we show the efficiency and convergence resulting from the proposed routing strategy. We also discuss the conditions under which the multihomed ISP can realize minimum cost by the proposed strategy.

This study examines the robustness of image quality factors in various types of environment illumination using a parameter design in the field of quality engineering. Experimental results revealed that image quality factors are influenced by environment illuminations in the following order: minimum luminance, maximum luminance and gamma.

This paper introduces new FPGA design of user-monitoring system for power management of PC display. From the camera readings the system detects whether the user looks at the screen or not and produces signals to control the display backlight. The system provides over 88% eye detection accuracy at 8f/s image processing rate. We describe new eye-tracking algorithm and hardware and present the results of its experimental evaluation in prototype display power management system.

In time-varying frequency selective channels, to obtain high-rate joint time-frequency diversity, linear dispersion coded orthogonal frequency division multiplexing (LDC-OFDM), has recently been proposed. Compared with OFDM systems, single-carrier systems may retain the advantages of lower PAPR and lower sensitivity to carrier frequency offset (CFO) effects, which motivates this paper to investigate how to achieve joint frequency and time diversity for high-rate single-carrier block transmission systems. Two systems are proposed: linear dispersion coded cyclic-prefix single-carrier modulation (LDC-CP-SCM) and linear dispersion coded zero-padded single-carrier modulation (LDC-ZP-SCM) across either multiple CP-SCM or ZP-SCM blocks, respectively. LDC-SCM may use a layered two-stage LDC decoding with lower complexity. This paper analyzes the diversity properties of LDC-CP-SCM, and provides a sufficient condition for LDC-CP-SCM to maximize all available joint frequency and time diversity gain and coding gain. This paper shows that LDC-ZP-SCM may be effectively equipped with low-complexity minimum mean-squared error (MMSE) equalizers. A lower complexity scheme, linear transformation coded SCM (LTC-SCM), is also proposed with good diversity performance.

When the Akebono (EXOS-D) satellite passed through the plasmasphere, a series of lightning whistlers was observed by its analog wideband receiver (WBA). Recently, we developed an intelligent algorithm to detect lightning whistlers from WBA data. In this study, we analyzed two typical events representing the clear dispersion characteristics of lightning whistlers along the trajectory of Akebono. The event on March 20, 1991 was observed at latitudes ranging from 47.83 (47,83N) to -11.09 (11.09S) and altitudes between ∼2232 and ∼7537 km. The other event on July 12, 1989 was observed at latitudes from 34.94 (34.94N) and -41.89 (41.89S) and altitudes ∼1420–∼7911 km. These events show systematic trends; hence, we can easily determine whether the wave packets of lightning whistlers originated from lightning strikes in the northern or the southern hemispheres. Finally, we approximated the path lengths of these lightning whistlers from the source to the observation points along the Akebono trajectory. In the calculations, we assumed the dipole model as a geomagnetic field and two types of simple electron density profiles in which the electron density is inversely proportional to the cube of the geocentric distance. By scrutinizing the dipole model we propose some models of dispersion characteristic that proportional to the electron density. It was demonstrated that the dispersion D theoretically agrees with observed dispersion trend. While our current estimation is simple, it shows that the difference between our estimation and observation data is mainly due to the electron density profile. Furthermore, the dispersion analysis of lightning whistlers is a useful technique for reconstructing the electron density profile in the Earth's plasmasphere.

Three methods of presenting a three-dimensional (3-D) image – a real object, a protruding stereoscopic display, and the depth-fused 3-D (DFD) display – have different tendencies for the change in perceived depth produced when the visual acuity of the dominant eye is decreased by an occlusion foil. These different tendencies are estimated from the slope and correlation coefficient of the plot of perceived depth difference versus stimuli depth difference. This estimation was derived using the same experimental system setup composed of two displays and a half mirror for all three 3-D display methods. The perceived depth difference was measured for four subjects by calipers using two fingers. The slope and correlation coefficient had almost the same tendencies as follows. The real object had the smallest decrease among the three 3-D display methods when the dominant eye's visual acuity was decreased and the protruding stereoscopic display had the largest decrease. The DFD display method had an intermediate decrease between those of the real object and protruding stereoscopic display. When the dominant eye's visual acuity was high enough, the differences among the three 3-D display methods were small. When its visual acuity was decreased, the differences increased among the three 3-D display methods and became statistically significant.

Internet behavior is becoming more complex due to ever-changing networking technologies and applications. Thus, understanding and controlling the complex behavior of the Internet are important for designing future networks. One of the complex behaviors of the Internet is traffic dynamics. Previous studies revealed that flow control in the transport layer affects the traffic dynamics of the Internet. However, it is not clear how the topological structure impacts traffic dynamics. In this paper, we investigate packet delay dynamics and traffic fluctuation in ISP router-level topologies where the degree distribution exhibits a power-law nature, and the nodes interact via end-to-end feedback control functionality. We show the packet delay dynamics of the BA topologies generated by the Barabasi-Albert (BA) model and the ISP router-level topologies. Simulation results show that the end-to-end delay distributions exhibit a heavy tail in the TCP model. Moreover, the number of links with highly fluctuating queue length increases dramatically compared to that in the stop-and-wait model. Even in this case, the high-modularity structures of the ISP topologies reduce the number of highly fluctuating links compared with the BA topologies.

Cloud data center services, such as video on demand (VoD) and sensor data monitoring, have become popular. The quality of service (QoS) between a client and a cloud data center should be assured by satisfying each service's required bandwidth and delay. Multipath traffic engineering is effective for dispersing traffic flows on a network; therefore, an improved k-shortest paths first (k-SPF) algorithm is applied to these cloud data center services to satisfy their required QoS. k-SPF can create a set of multipaths between a cloud data center and all edge routers, to which client nodes are connected, within one algorithm process. Thus, k-SPF can produce k shortest simple paths between a cloud data center and every access router faster than with conventional Yen's algorithm. By using a parameter in the algorithm, k-SPF can also impartially use links on a network and shorten the average hop-count and number of necessary MPLS labels for multiple paths that comprise a multipath.

With the wide usage of multispectral images, a fast efficient multidimensional clustering method becomes not only meaningful but also necessary. In general, to speed up the multidimensional images' analysis, a multidimensional feature vector should be transformed into a lower dimensional space. The Hilbert curve is a continuous one-to-one mapping from N-dimensional space to one-dimensional space, and can preserves neighborhood as much as possible. However, because the Hilbert curve is generated by a recurve division process, 'Boundary Effects' will happen, which means data that are close in N-dimensional space may not be close in one-dimensional Hilbert order. In this paper, a new efficient approach based on the space-filling curves is proposed for classifying multispectral satellite images. In order to remove 'Boundary Effects' of the Hilbert curve, multiple Hilbert curves, z curves, and the Pseudo-Hilbert curve are used jointly. The proposed method extracts category clusters from one-dimensional data without computing any distance in N-dimensional space. Furthermore, multispectral images can be analyzed hierarchically from coarse data distribution to fine data distribution in accordance with different application. The experimental results performed on LANDSAT data have demonstrated that the proposed method is efficient to manage the multispectral images and can be applied easily.

As ROADMs (Reconfigurable Optical Add/Drop Multiplexers) are becoming widely used in metro/core networks, distributed control of wavelength paths by extended GMPLS (Generalized MultiProtocol Label Switching) protocols has attracted much attention. For the automatic establishment of an arbitrary wavelength path satisfying dynamic traffic demands over a ROADM or WXC (Wavelength Cross Connect)-based network, precise determination of chromatic dispersion over the path and optimized assignment of dispersion compensation capabilities at related nodes are essential. This paper reports an experiment over in-field fibers where GMPLS-based control was applied for the automatic discovery of chromatic dispersion, path computation, and wavelength path establishment with dynamic adjustment of variable dispersion compensation. The GMPLS-based control scheme, which the authors called GMPLS-Plus, extended GMPLS's distributed control architecture with attributes for automatic discovery, advertisement, and signaling of chromatic dispersion. In this experiment, wavelength paths with distances of 24 km and 360 km were successfully established and error-free data transmission was verified. The experiment also confirmed path restoration with dynamic compensation adjustment upon fiber failure.