An antenna-permutation (AP) scheme is described for channel-vector quantization (CVQ) in zero-forcing beamforming (ZFBF) multiuser multiple-input and multiple-output orthogonal frequency-division multiplexing systems with multiple receive antennas. Different sets of multiple channel sub-matrices are selected for different subcarriers and then quantized to multiple quantization vectors for finite rate feedback. Based on the quantization vectors, ZFBF provides a single stream or multiple streams to users while increasing frequency selectivity. Simulation results demonstrate that AP-CVQ with four-bit quantization that incorporates with pre-whitening maximum likelihood detection for two stream reception achieved better average packet error rates than minimum mean square error receive beamforming for single stream reception when the frequency selectivity was not severe.

Checker synthesis for assertion based verification becomes popular because of the recent progress on the FPGA prototyping environment. In the paper, we propose a checker synthesis method based on the finite input-memory automaton suitable for embedded RAM modules in FPGA. There are more than 1 Mbit memories in medium size FPGA's and such embedded memory cells have the capability to be used as the shift registers. The main idea is to construct a checker circuit using the finite input-memory automata and implement shift register chain by logic elements or embedded RAM modules. When using RAM module, the method does not consume any logic element for storing the value. Note that the shift register chain of input memory can be shared with different assertions and we can reduce the hardware resource significantly. We have checked the effectiveness of the proposed method using several assertions.

The use of cross-polarized antennas for multiple-input multiple-output (MIMO) systems is receiving attention as they are able to double the number of antenna for half antenna spacing needs. This paper presents the channel correlation property of the 3rd Generation Partner Project (3GPP)/3GPP2 spatial channel model (SCM) with the polarization propagation. The statistical average of the per path polarization correlation given random cross-polarization discrimination (XPD) with co-located ideal tilted dipole antennas is derived. The impact on the random behavior of the polarization correlation due to the slant offset angle, the per path angular spread (AS), and the random XPD is analyzed. The simulation results show that the variation of polarization correlation caused by the random XPD is maximized with a 58 slant offset angle under the assumptions of all predefined scenarios in SCM. The per path AS has minor impact on the statistics of the polarization correlations. The randomness of polarization correlation is negligible for an XPD with small standard deviation.

We describe a channel-vector quantization scheme that is suitable for multiple stream transmission per user in zero-forcing beamforming (ZFBF) multiuser multiple-input and multiple output (MU-MIMO) systems with finite rate feedback. Multiple subsets of a channel matrix are quantized to vectors from random vector codebooks for finite rate feedback. The quantization vectors with an angle difference that is closer to orthogonal are then selected and their indexes are fed back to the transmitter. Simulation results demonstrate that the proposed scheme achieves a better average throughput than that serving a single stream per user when the number of active users is smaller than the number of transmit antennas and that it provides an average throughput close to that serving a single stream per user when the number of users is equal to the number of transmit antennas.

We present a dual traveling-wave electrode InP-based Mach-Zehnder (MZ) modulator with an n-i-n waveguide structure. An electrical input/output interface placed on one side of the chip helps us to drive the modulator in a push-pull configuration. This configuration provides the modulator with great advantages such as reduced driving voltage amplitude, chirp-free operation, and the ability to support advanced modulation formats. The fabricated modulator exhibits good performance. A 40 Gb/s non-return-to-zero (NRZ) signal is successfully generated with a low driving of 1.3 Vpp. In addition, a 10-Gb/s optical duobinary (DB) signal is successfully generated and transmitted over a 240-km single-mode fiber (SMF). We also developed a wavelength tunable transmitter hybrid integrated with a modulator with a wavelength tunable laser. Full C-band 10-Gb/s operation and a 100-km SMF transmission with a low power penalty are confirmed.

An adaptive zero forcing maximum likelihood soft input soft output (AZFML-SISO) detector for multiple input multiple output (MIMO) wireless systems is presented. Its performance in an iterative MIMO receiver is analyzed. The AZFML-SISO detector calculates the soft outputs, applying the ML approach to the list that contains only those signal vectors limited by a hypersphere around the zero forcing (ZF) solution. The performance of the algorithm is evaluated on a communication system based on the standard for single carrier broadband wireless communication IEEE 802.16, with three transmit and three receive antennas. It is shown by computer simulation that the computational complexity in an average sense of the receiver running the AZFML-SISO algorithm is reduced by 90% at the SNR values of 30 dB and by 50% for SNR values of 15 dB in comparison to the receiver with an ML detector, while the system performance degrades by less than 1 dB.

In this paper, the impacts of using multiple transmit antennas under doubly correlated MIMO channels on CDMA uplink code acquisition is studied. The performance of a MIMO code acquisition system is analyzed by considering spatial fading correlations, which depend on antenna spacing and azimuth spread at both MS and BS. The detection performance and mean acquisition time in the presence of spatially correlated MIMO channel are presented on a frequency selective fading channel and compared with the cases of spatial fading decorrelation via numerical evaluation. It is observed that the acquisition performance relies on the degree of spatial fading correlations. In addition, it is surprisingly seen that a MIMO code acquisition system provides worse performance than SIMO.

This paper proposes Twin Turbo (T2) MIMO-OFDM (Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing). The advanced iterative decoder, called the T2 decoder, decreases the transmission error rate compared to conventional turbo decoders because it uses the correlation information among the bits mapped on an identical symbol of multi-level modulation and updates the channel reliability. When T2 is applied to a MIMO-OFDM, the required symbol energy to noise power density ratio (Es/N0) can be reduced more effectively than when T2 is applied to SISO (Single Input Single Output). This is because T2 can use the correlation among the bits not only mapped on an identical symbol but also transmitted from different antennas. Moreover, T2 achieves good performance in a correlated MIMO channel because the average minimum squared Euclidean distances between symbol replica candidates consisting of signals transmitted from multiple transmitter antennas are reduced. Computer simulations verify that the required Es/N0 of T2 MIMO-OFDM using 16QAM is 1.9 dB lower than that of a conventional turbo decoder when the correlation coefficients of transmitter and receiver antennas are 0.8. A computational complexity analysis clarifies the relation between the increase in computational complexity and the reduction in the required Es/N0.

Pen-input is not a new means for CAD designers, in particular, in the concept design phase. Meanwhile, B-Splines are well known curve and surface design tool in 3D shape modeling in the final modeling stages in which neat curves and surfaces should be produced. In this paper, an intuitive B-Spline design method that can be used for the CAD systems both in conceptual modeling phase and in later design phases is proposed. Unlike the control point based interactive modification schemes for the B-spline curves and surfaces, we extend what has been called the "touch-and-replace" method used for poly-line modification in the late 1980s to B-Splines; our approach uses successive pen strokes to modify the final shape of the existing B-Spline curves and surfaces. We also show related user test results in this paper as an empirical proof.

This letter analyzes the outage probability of limited feedback beamforming systems with receive antenna selection. Tight analytical closed-form expressions of outage performance are derived for both cases, with and without spatial fading correlation, which allow for evaluation of the performance as a function of the codebook size, the level of fading correlation, and the number of transmit and receive antennas. Simulation results are also provided to verify the analysis.

MIMO (Multiple Input Multiple Output) communications systems equipped with array antennas at both the transmitter and receiver sides are a promising scheme to realize higher rate and/or reliable data transmission. In this paper, capacity analysis of MIMO Rayleigh channel with spatial correlation at the receiver of multipath taken into account is presented. In general, a model configuration of local scattering around a mobile station in MIMO environment is carried out by simulation to examine spatial correlation coefficients. Based on statistical properties of the eigenvalues of correlated complex random Wishart matrices, the exact closed-form expressions of distribution of the eigenvalues are investigated. Then, the general closed-form evaluation of integral form is proposed based on Meijer's G-function. The results demonstrate that the ergodic capacities are improved by increasing the number of the antennas and the SNR's. Compared with i.i.d. (independent identically distributed) Rayleigh channel, the incremental improvement of correlated Rayleigh channel is reduced by spatial fading correlation. The analytical results validated by Monte-Carlo simulations show a good agreement.

In this letter, we propose a video traffic model based on a class of stochastic processes, which we call truncated GeoY/G/∞ input processes. Group of picture (GOP) size traces are modeled by truncated GeoY/G/∞ input process with gamma-distributed batch sizes Y and Weibull-like autocorrelation function. With full-length MPEG-4 video traces in QCIF, we run simulations to show that our proposed model estimates packet loss ratios at various traffic loads more accurately than existing modeling methods.

In a codebook based precoding MIMO system, the precoding codebook significantly determines the system performance. Consequently, it is crucial to design the precoding codebook, which is related to the channel fading, antenna number, spatial correlation etc. So specific channel conditions correspond to respective optimum codebooks. In this paper, in order to obtain the optimum codebooks, a universal unitary space vector quantization (USVQ) codebook design criterion is provided, which can design the optimum codebooks for various fading and spatial correlated channels with arbitrary antenna configurations. Furthermore, the unitary space K-mean (USK) algorithm is also proposed to generate the USVQ codebook, which is iterative and convergent. Simulations show that the capacities of the precoding MIMO schemes using the USVQ codebooks are very close to those of the ideal precoding cases and outperform those of the schemes using the traditional Grassmannian codebooks and the 3GPP LTE DFT (discrete Fourier transform) codebooks.

This paper investigates the performance of multiple monopole antennas mounted on a card-type terminal, which is expected to be used in the systems beyond 3 G, based on the calculated and measured radiation patterns for the 2.0 GHz. We characterize the feasible performance of quarter-wavelength monopole antennas mounted on a card-type terminal in a multiple antenna configuration with narrow element spacing of less than a half-wavelength assuming that the antennas used must satisfy the space restrictions of the mobile terminal. Performance figures of merit for the multiple antenna performance include the beamforming gain, correlation coefficient, and MIMO channel capacity. Furthermore, we investigate the influence of a finite ground plane on the characteristics of multiple monopole antennas using a typical antenna configuration comprising a simple finite ground plane and multiple monopole antennas to discuss the fundamental characteristics.

Combining relaying and multi-input multi-output (MIMO) transmission is a generic way to overcome the channel-fading impairments. Best antenna selection is a simple but efficient MIMO method that achieves the full diversity and also serves as a lower bound reference of MIMO performance. For a dual-hop MIMO system with an ideal amplify-and-forward (AF) relaying gain and best antenna selection, we provide a probability density function (PDF) of received signal-to-noise ratio (SNR) and an analytic BER equation when using M-ary PSK in Rayleigh fading channels. The analytic result is shown to exactly match with simulated one. Furthermore, the effect of link unbalance between the first hop and the second hop, due to differences in the number of antennas deployed in both hops as well as in the average power of channel coefficients, on the BER performance is numerically investigated and the results show that the links with better balance give better performance.

Recently, it has been shown in the literature that in a relaying network utilizing multiple relay precoding techniques, the signal-to-noise ratio (SNR) at each destination node will scale linearly with the number of relays K, which is referred to as the distributed array gain (DAG) K. In this paper, we focus on the performance of multiple relay precoding based on limited channel state information (CSI) feedback, which is different from the prior studies that assume perfect CSI at each of the relay nodes. Our analysis shows that the conventional limited feedback scheme fails to obtain the DAG K, which is a consequence of the phase ambiguity introduced by the channel quantization function. Based on the theoretical analysis, we propose a novel feedback and precoding procedure, and prove that the proposed procedure can obtain the DAG K with only one additional feedback bit for quantizing each relay-destination channel compared with the conventional scheme. Simulation results verify that with the proposed procedure, the SNR performance is effectively improved when the number of relays K is small, and scales linearly with K in relatively large K regime.

An optimized Built-In Self-Test technology is proposed in this paper. A simplified algebraic model is developed to represent the configurations of single input change circuits. A novel single input change sequence generation technique is designed. It consists of a modified scan shift register, a seed storage array and a series of XOR gates. This circuitry can automatically generate single input change sequences of more unique vectors. Experimental results based on the ISCAS-89 benchmark show that the proposed method can achieve high stuck-at fault coverage with low switching activity during test applications.

The input impedance of an antenna fluctuates because of various usage conditions, which causes a mismatch between an internal circuit and an antenna. An automatic matching system solves this problem, then this paper presents a reconfigurable impedance tuner that has a set of fixed capacitors controlled by switching p-i-n diodes. A fast control algorithm for selecting the appropriate conditions of an impedance tuner is proposed and mounted on FPGA to demonstrate the performance.

Sum power iterative water-filling (SPIWF) algorithm provides sum-rate-optimal transmission scheme for wireless multiple-input multiple-output (MIMO) broadcast channels (BC), whereas it suffers from its high complexity. In this paper, we propose a new transmission scheme based on a novel block zero-forcing dirty paper coding (Block ZF-DPC) strategy and multiuser-diversity-achieving user selection procedure. The Block ZF-DPC can be considered as an extension of existing ZF-DPC into MIMO BCs. Two user selection algorithms having linear increasing complexity with the number of users have been proposed. One aims at maximizing the achievable sum rate directly and the other is based on Gram-Schmidt Orthogonalization (GSO) and Frobenius norm. The proposed scheme is shown to achieve a sum rate close to the sum capacity of MIMO BC and obtain optimal multiplexing and multiuser diversity gain. In addition, we also show that both selection algorithms achieve a significant part of the sum rate of the optimal greedy selection algorithm at low computation expenditure.

A new high-rate space-time block code (STBC) with full transmit diversity gain for four transmit antennas based on a generalized Alamouti code structure is proposed. The proposed code has lower Maximum Likelihood (ML) decoding complexity than the Double ABBA scheme does. Constellation rotation is used to maximize the diversity product. With the optimal rotated constellations, the proposed code significantly outperforms some known high-rate STBCs in the literature with similar complexity and the same spectral efficiency.